Arkon CM090-2, SM020-2, CM090, CM097-2, CM097 User Manual

CM097 Lighter Socket with Power Adaptor Mounting Pedestal

CM097

-Also available with dual T-head configuration CM097-2

(A)

(D)

12V Powering Outlet socket

(B) (C)

Installation Instructions

Insert the DC Power plug (A) completely into the vehicle's

Step 1.

12V/lighter socket.

Adjust the angle of the pedestal arm by loosening/tightening

Step 2.

the wing nuts (B) to the desired placement angle.

(Sold Separately)

SM020

SM020-2

(Sold Separately)

CM097

-Also available with dual T-head configuration

CM097-2

(E)

(G)

(F)

Universal Cradle Instructions (Sold Separately)

Step 1.

Step 2.

If necessary, adjust the support legs (G) by sliding them laterally. These provide support for your device.

Place device on the support legs (G) and squeeze the side grip arms (E) until they fit securely to the device.

CM090

CM090-2

Attach your cradle or device to the pedestal by inserting the

Step 3.

single T-tab (C) into the T-slot (D). Adjust the angle and rotation of the head by loosening/tightening the wing nuts (B).

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and/or air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of the pedestal mount.

Step 3.

Consumer Hotline: (USA) (800) 841-0884 (INT'L) (626) 254-9005 Mon-Fri. 9am-5pm, PST

Push the release button (F) in order to release the device from the cradle.

The Mobile Mounting Specialists

Arcadia, CA 91006 USA

www.arkon.com

Made in Taiwan