Arkon CM035-ST-2 User Manual

CM035-ST-2 I Vehicle Specific Mount Swivel AMPS Pedestal

o o

CM035-ST-2 4-ho!e AMPS to Dual T-tab conversion head

Vehicle Specific Mount Installation Instructions

Step 1 Install the vehicle specific mount (sold

separately by other manufacturers) according to the instructions included with your vehicle specific mounting bracket (see example below).

CM035-ST 4-hole mount / AMPS to T-tab conversion head

CM035-ST-AMPS 4-hole AMPS Adapter Plate (for Sirius, and other devices without a T-slot)

Step 2. Line up the CM035-ST pedestal with the

4-hole AMPS pattern on the mounting bracket and use the included screws to attach the pedestal to the head.

A typical 4-Hole AMPS pattern {Cradle not included)

Package Contents: (1) CM03S-ST or CM035-ST2 or CM035AMPS Vent Mount Assembly (4) Screws for vehicle specific mounting bracket (not included) (4) Screws for optional dash or console mounting.

NOTES:

1. Drilling onto the dash or console can permanently damage the vehicle.

Step 3. Loosen the swivel tightening knob by

turning it counter clockwise. Adjust the angle of the pedestal head as needed, then retighten to secure.

Installation Instructions for AMPS Pedestal Mount Step 3. Use included screws and bolts to attach

CM035-ST-2 to any AMPS head pedestal to provide swivel action. Any DualT-tab cradle (sold separately) can then be attached.

Safety Precautions / Warning

Drilling onto the floor or console can permanently damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system or other highly sensitive vehicle components.

Arkon Resources, Inc. is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this mounting solution.

(VSM brackets sold separately by other manufacturers)

Brodit Bracketron ProClip THB Bury Pro.Fit Panavise

All brand names and product names are tradenrarks or registered trademarks of their respective owners.

Dash or Console Mounting Installation Instructions

Step 3. Use included self-tapping screws to attach the

pedestal to dash or console.

Warning: Drilling onto the dash or console will permanently damage the vehicle. Do not mount in an airbag deployment zone. See warning below.

ARHON

RESOURCES INC. The Mobile Mounting Specialists'“

Consumer Hotline: www.arkon.com (USA) (800)841-0884 Arcadia, CA 91006 USA (INT'L) (626)254-9005 Made in Taiwan