Arkon CM019-KST User Manual

CM019-KST 7" Windshield Suction Pedestal

CM019-KST-1

(A)

Windshield Installation

Push the pedestal suction cup (A) firmly to the windshield. Flip the lever (B) down to secure the suction cup.

(E)

(B)

(F)

(G)

CM019-KST-2

(H)

CM019-KST-2SH

(B)

(C)

CM019-KST-AMPS

Dash Installation (Optional, when disc is included)

Step 1.

Locate a safe flat surface on the dash or console to mount the pedestal. Clean

(A)

the dash with the alcohol pad provided. Let the dash surface dry before applying the adhesive disc (C).

Push the pedestal suction

Step 2.

cup (A) firmly to the disc (C). Flip the lever (B) down to secure the suction cup.

(I)

(J)

(D)

Gooseneck and Dual-T Head Instructions

Adjust the angle of the pedestal head by loosening the

Step 1.

adjustment knob (D).

Adjust the angle and rotation of the pedestal head by loosening

Step 2.

the adjustment knob (E).

Attach the device cradle (H) to the dual-T tab head (F) by

Step 3.

inserting the T-tabs into the T-slots (G). (Cradles are sold separately and vary depending on the device that you are using)

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and/or air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of the pedestal mount.

(K)

AMPS Configuration Instructions (For CM019-KST-AMPS)

Step 1.

Consumer Hotline: (USA) (800) 841-0884 (INT'L) (626) 254-9005 Mon-Fri. 9am-5pm, PST

Secure the AMPS pedestal head (I) to the device or device cradle (J) by using a screwdriver to secure the pedestal head with the nuts and screws (K) to the cradle. (Cradles are sold separately and vary depending on the device that you are using)

The Mobile Mounting Specialists

Arcadia, CA 91006 USA

www.arkon.com

Made in Taiwan