Page 1
QUICK REFERENCE GUIDE – FUNCTIONS
Freedom Bath
Emergency seal release
For medical emergency
during bathing, perform
step 1-3.
For power failure, drain
the bathtub before
performing step 1-3.
21 3
Open the lid.
Inatable door seal
Activate the inatable sealing system to make the door watertight. Raise
the door and press the door seal/drain button.
When not in use, leave door raised with the seal deated.
Push the button. The drain opens and
water rushes out around the door.
Automatic drain
A
The drain only closes when the door is raised to top position (A).
When the sealing system is deactivated, the drain opens (B).
Manually push the door down.
B
Air spa system (optional feature)
1 43
A
Raise the door to top position and ll the bathtub above
the high water level sensor button (A).
2
Press the ON/OFF
button, the air blower
starts at maximum
speed.
Safety belt (optional feature)
Press and hold air
speed button to reduce
intensity. Release
button when desired
intensity is reached.
Press the ON/OFF
button to stop the air
blower.
B
A
Fasten the safety belt according to A or B.
Adjust the length by pulling the safety belt end by the clip.
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com
08.AF.03_1EN • 06/2020
Loading...