Thank you for purchasing the ARIES High Purity Water System. For optimum performance and safety please
read and follow these instructions carefully.
You have a quality, world class water treatment system that will provide ultrapure water for many years of trouble
free operation. Years of engineering and practical experience went into manufacturing this appliance which will
dispense Ultra High Purity Water. To assure that you operate and maintain this unit properly and safely please
read this manual carefully.
In order that we may keep you informed regarding your unit, please take a moment to complete and mail the
owner registration card provided with this appliance.
If you have any questions concerning the operation of the unit, or need service, refer to section 11.0
"REQUESTING SERVICE". When requesting service you will need the model and serial number, as well as the
purchase date of your unit and the name of the dealer you purchased it from. For your convenience record this
information below:
Model Number: __________________________ Date: __________________________
Serial Number: ___________________________ Dealer: __________________________
When using this electrical appliance, basic safety precautions should always be followed including the
following:
• READ ALL INSTRUCTIONS before use.
• Follow all WARNINGS and INSTRUCTIONS marked on the product.
• DO NOT immerse appliance in water or other liquid. Use a soft cloth and mild detergent when
cleaning the unit.
• DO NOT remove the exterior covers with unit power applied.
• DO NOT remove the ultraviolet lamp (if installed) with unit power applied.
• DO NOT look directly at the ultraviolet lamp (if installed) with unit power applied.
• DO NOT operate any appliance with a damaged or frayed power cord. To disconnect the power
cord, grip the plug and pull it from the wall outlet, NEVER PULL ON CORD!.
•DO NOT use this appliance outdoors. This appliance is intended for commercial, industrial,
institutional, and professional use. Use of this product in a manner other than recommended
herein, may void the warranty.
•DO NOT operate this appliance without it being connected to an adequate water supply and purged of
air or damage to the pump may occur.
•DO NOT allow the cord to hang over the edge of a counter top or to touch hot surfaces. NOTE: If
an extension cord is used, verify that the rating of the extension cord is equal to or greater than
the rating of the appliance.
• Refer servicing of a defective or damaged unit to the factory or an authorized dealer.
• The use of attachments not recommended by the manufacturer may adversely affect the water
purity or cause appliance damage and void its warranty.
•Avoid contacting the dispensing outlets with any foreign materials or hands to prevent
contaminating them.
ARIES FilterWorks, a division of ResinTech, Inc. * 160 Cooper Road * West Berlin, NJ 08091
The following terms are used throughout this text. Please take a few moments to familiarize yourself with them
so that the information and instructions within are clear.
TERMDESCRIPTION
LEDLight Emitting Diode, is a semiconductor indicating device used for the status indicators
on the operator control panel of this unit.
LCDLiquid Crystal Display, is a semiconductive display device used in the operator
control panel of this unit.
TOCTotal Organic Carbon. The identification of organic carbon in water is helpful to
assure successful water system operation. Trace organic chemicals can interfere
with highly sensitive reactions and alter biological processes.
TDSTotal Dissolved Solids conduct electricity. This conductivity allows you to measure the
concentration of salts directly in parts per million (ppm). Higher TDS increases the load on
the deionizing cartridges.
SDISilt Density Index, is a scale for determining the amount of suspended solids in water that
exceed 0.45 microns in size. A regulated flow is passed through a 0.45 membrane and
the flow, time, and pressures are plotted to arrive at the index number. Higher SDI
numbers result in premature fouling of resin and filters.
HPCHeterotrophic Plate Count, formerly known as the standard plate count, is a
procedure for estimating the number of live heterotrophic bacteria in water and
measuring changes during water treatment and distribution.
ARIES FilterWorks, a division of ResinTech, Inc. * 160 Cooper Road * West Berlin, NJ 08091