Aries Filterworks AF-20-4223, AF-20-4223-BB, AF-20-4202-BB, AF-20-4202, AF-10-4223-BB Data Sheet

KEY FEATURES

•

EXTENDED SERVICE LIFE HIGH-CAPACITY TWIN BED MEDIA

•

HIGH CAPACITY, SCALE PREVENTION, REDUCES CORROSION

•

SUPERIOR PHYSICAL STABILITY RESISTS BEAD BREAKAGE

TWIN BED DEIONIZATION CARTRIDGES

®

Aries FilterWorks twin bed deionizaton cartridges use ResinTech

cation and
anion resins in a two bed, layered cartridge. These resins, combined with
the cartridge manufacturing of Aries FilterWorks, provide consistent water
quality with the backing of a strict quality control program. Standard Twin
Bed and High Capacity configurations are available depending on the effluent
range required.

APPLICATIONS

INDUSTRIAL USE -

Scale prevention extends service life of critical components such as heating
electrodes and tubing. Layered deionization cartridges are an effective pre­treatment of the water source supply to reduce and maintain mineral levels for
varying processes. Applications include; environmental chambers, humidifiers,
chiller systems, jacketed cooking vessels, sterilizers, autoclaves and ultrasonic
equipment.

LABORATORY USE -

Layered cartridges can be effective by providing low grade deionized water
for making up reagents, preparing buffers, and providing spot free laboratory
glassware rinsing.

LABORATORY • COMMERCIAL • RESIDENTIAL

AF SERIES

TWIN BED DEIONIZATION

ABOUT TWIN BED DEIONIZATION

High purity mixed bed cartridges removal all minerals and can be very corrosive to materials such as copper, aluminum, and certain types of stain­less steel. Layered cartridges are an ideal alternative to mixed bed cartridges providing moderate ionic removal without the corrosive characteristics.
Standard twin bed cartridges use a layer of strong acid cation (SAC) and strong base anion (SBA) resin. “High Capacity” twin bed cartridges are
made up of strong acid cation (SAC) and weak base anion (WBA) resins. Using these resins provide lower grade water compared to the standard
twin beds as the weak base resin ignores carbon dioxide and silica ions yielding more capacity. Using premium ResinTech

®

resins ensures consistent

quality and performance.

FEATURES & BENEFITS

• RESINTECH

®

PREMIUM MEDIA FOR LONG-LASTING SERVICE LIFE

Twin bed deionization layered cartridge with ResinTech® CG8-H cation and SBG2-OH anion resins
High capacity deionization cartridge with ResinTech® CG8-H cation and WBMP-OH anion resins

• RESIN AND CARTRIDGE MANUFACTURER ALL-IN-ONE

Quality is built into every cartridge ensuring user confidence and performance

• FITS ALL STANDARD RESIDENTIAL AND INDUSTRIAL SIZE HOUSING

AF Series cartridges are double-open end cartridges that fit standard residential and industrial housings

• OVERSIZED CARTRIDGE FOR MAXIMUM MEDIA FILL

AF Series cartridges have up to 50% higher capacity and extend cartridge life, due to the use of larger cartridges

• QUALITY PRODUCED AND MADE IN THE USA

Cartridges are produced by Aries FilterWorks, a division of ResinTech®. Strict quality control over all aspects of cartridge and media production
allows complete traceability of every filter

160 Cooper Road • Building #2, Suite A • West Berlin, NJ 08091-9243, USA • p: 856.626.1550 • f: 856.626.1551 • [e-mail] • ariesfilterworks.com

A Division of ResinTech • Innovations in Ion Exchange

AF SERIES - TWIN BED DEIONIZATION

12.5

1

2

TECHNICAL DATA

10” SLIM 20” SLIM 10” SUPER BLUE 20” SUPER BLUE

Diameter (in.) 3.0” 2.9” 4.6” 4.6”

3

Length (in.) 9.9” 20.0” 10.0” 20.0”
Temperature (˚F.)

Min. 40˚ 40˚ 40˚ 40˚
Max 100˚ 100˚ 100˚ 100˚

Pressure (psi)
Min. 20 20 20 20
Max. 125 125 125 125

Micron Rating (µ) 25 25 25 25
Materials of Construction

1. Gasket TPE TPE TPE TPE

2. End Caps PP ABS ABS ABS

5

3. Pads PE PE PE PE

4. Body / Tube PP ABS ABS ABS

5. Media Layer 1*

6. Media Layer 2*

PP Polypropylene
ABS Acrylonitrile Butadiene Styrene

ResinTech
ResinTech® CG8-H Cation Exchange Resin

®

SBG2-OH Anion Resin or WBMP-OH Anion

PE Polyester
TPE Thermoplastic Elastomer

4

TWIN BED DELTA P

10.0

7.5

6

5.0

Delta P (psi)

2.5

0

0.200.4 0.6 0.8

1.0

Flow (gpm)

MEDIA

3

As a division of ResinTech, Inc.®, Aries FilterWorks is the only integrated water filtration media and
cartridge manufacturer providing a premium product at the most competitive cost. Aries builds

2

technology and knowledge of ion exchange and specialty adsorbents into each cartridge. Strict
quality control over all aspects of cartridge production allows complete traceability of every filter.

ORDERING GUIDE

MEDIA PART NUMBER TYPICAL EFFLUENT**

STANDARD HOUSING

DIAMETER X LENGTH

FLOW RATE (GPM)

OPERATING

MAXIMUM

TOTAL CAPACITY*

(GRAINS AS CaCO

ESTIMATED GALLONS*
200 PPM 5 PPM

)

3

AF-10-4202 2.5” x 10” 0.2 0.3 460 40 1,580
AF-20-4202 2.5” x 20” 0.2 0.6 800 70 2,580
AF-10-4202-BB 4.5” x 10” 0.5 0.8 950 80 3,200

Twin Bed

Layered ResinTech®

CG8-H and SBG2-OH

AF-20-4202-BB 4.5” x 20” .75 1.5 2,000 170 6,800

10” Slim Line

20” Slim Line

10” Super Blue

20” Super Blue

(RESISTIVITY)

> 200 KΩ-cm

@ pH 7.5 - 8.5

AF-10-4223 2.5” x 10” 0.2 0.3 540 45 1,800
AF-20-4223 2.5” x 20” 0.2 0.6 950 80 3,200
AF-10-4223-BB 4.5” x 10” 0.5 0.8 1,150 100 3,800

High Capacity

Layered ResinTech®

CG8-H and WBMP-OH

AF-20-4223-BB 4.5” x 20” .75 1.5 2,500 205 8,500

* Through-put based upon capacity. Specific feed contaminants can effect capacity.
** Effluent based upon flow rate and 200 ppm feed water. Specific feed water contaminants can effect effluent water quality.

Notes: Ordering information subject to change without notice. Please verify all specifications prior to ordering.

To place an order call [phone] or e-mail [e-mail]

The following is made in lieu of all other warranties expressed or implied. Manufacturer’s and Seller’s only obligation shall be to issue credit against the purchase or replacement of the equipment proved to be defective in material or workmanship. Neither Manufacturer nor Seller
shall be liable for any injury, loss or damage, direct or indirect, special or consequential, arising out of the use of, misuse, or the inability to use such product. The information contained herein is based on technical data and tests which we believe to be reliable and is intended for
use by persons having technical skill at their discretion and risk. Since conditions of use are outside ResinTech’s control, we can assume no liabilit y whatsoever for results obtained or damages incurred through the application of the data presented. This information is not intended
as a license to operate under, or a recommendation to infringe upon, any patent of ResinTech’s or others covering any material or use. The foregoing may not be altered except by written agreement signed by officers of the manufacturer.

IMPORTANT NOTICE TO USER:

> 20 KΩ-cm

@ pH 5.5 - 6.5

DS-AFTwinBed-rev1.5