Aries Filterworks AF-10-3695, AF-10-3695-BB, AF-20-3695, AF-20-3695-BB Data Sheet

KEY FEATURES

•

HIGHEST ARSENIC REMOVAL CAPACITY

•

ASM-10-HP MEDIA IS WQA GOLD NSF/ANSI 61 CERTIFIED

•

FITS STANDARD RESIDENTIAL AND INDUSTRIAL HOUSINGS

ARSENIC REMOVAL CARTRIDGES

LABORATORY • COMMERCIAL • RESIDENTIAL

AF SERIES

ARSENIC REMOVAL

Arsenic reduction is achieved by utilizing the advanced media technology of
ResinTech

®

ASM-10-HP resin. This Arsenic selective media has unsurpassed
capacity and is effective over the entire pH range of potable water. ResinTech®
ASM-10-HP is a strongly basic hybrid anion exchange resin, specially formu­lated to selectively remove arsenic.*

* Although ResinTech® ASM-10-HP has modest removal of Arsenite (As3), it is suggested to use additional oxida-

tion methods such as pre-chlorination to convert to Arsenate (As
please contact your local sales representative.

5

).For specific throughput and performance

APPLICATIONS

RESIDENTIAL POINT OF USE (POU) DRINKING WATER SYSTEM -

The EPA has defined as acceptable or safe a limit of 10 ppb for arsenic in
drinking water. If laboratory testing indicates levels above 10 ppb, the use of
a specific arsenic removal cartridge is indicated, due to the contamination of
source water.

PRIVATE WELLS POINT OF ENTRY (POE) -

Well water is particularly susceptible to arsenic, those not connected to munici­pal drinking water systems may want to consider this option as part of a whole
house system. Wells supply 15% of American populations with drinking water,
and these wells are not subject to EPA regulations. These wells provide safe
clean water, but occasionally can become contaminated, resulting in illness.

COMPONENT

ABOUT ARSENIC

Arsenic occurs naturally in soil and bedrock in many parts of the United States. Arsenic has no smell, taste, or color when dissolved in water, even in
high concentrations, and therefore only laboratory analysis can determine the presence and concentration of arsenic in water. Arsenic is a potential
concern to those who live in areas; with high natural deposits of arsenic, receive runoff from orchards, or from glass and electronic production waste.
The health effects of arsenic depend on its chemical form, how much is consumed, and for how long. Long-term exposure to arsenic can cause a
number of harmful effects on the human body.

FEATURES & BENEFITS

• USE OF RESINTECH

®

ASM-10-HP MEDIA

The initial capture of arsenate is by ion exchange, thus the removal rate of arsenic from the inlet liquid is much faster than ordinary iron based
media. Its strong base exchange functionally can be used to simultaneously remove nitrate, uranium,
chromate and other objectionable anions while removing arsenate

• FDA DRINKING WATER APPROVED MATERIALS OF CONSTRUCTION

Sonic welded construction is a solvent free method to join and assemble plastic parts, producing the highest quality safest product

• OVERSIZED CARTRIDGE FOR MAXIMUM MEDIA FILL

AF Series cartridges have up to 50% higher capacity and extend cartridge life, due to the use of larger cartridges

• QUALITY PRODUCED AND MADE IN THE USA

Cartridges are produced by Aries FilterWorks, a division of ResinTech®. Strict quality control over all aspects of production allows
complete traceability of every cartridge

* Consult your representative for additional usage information

160 Cooper Road • Building #2, Suite A • West Berlin, NJ 08091-9243, USA • p: 856.626.1550 • f: 856.626.1551 • [e-mail] • ariesfilterworks.com

A Division of ResinTech • Innovations in Ion Exchange

AF SERIES - ARSENIC REMOVAL

12.5

1

2

TECHNICAL DATA

10” SLIM 20” SLIM 10” SUPER BLUE 20” SUPER BLUE

Diameter (in.) 3.0” 2.9” 4.6” 4.6”
Length (in.) 9.9” 20.0” 10.0” 20.0”

3

Temperature (˚F.)
Min. 40˚ 40˚ 40˚ 40˚
Max 100˚ 100˚ 100˚ 100˚

Pressure (psi)
Min. 20 20 20 20
Max. 125 125 125 125

Micron Rating (µ) 25 25 25 25
Materials of Construction

1. Gasket TPE TPE TPE TPE

2. End Caps PP ABS ABS ABS

3. Pads PE PE PE PE

4. Body / Tube PP ABS ABS ABS

5. Media*

PP Polypropylene
ABS Acrylonitrile Butadiene Styrene

ResinTech® ASM-10-HP Hybrid Anion Resin*

PE Polyester
TPE Thermoplastic Elastomer

ARSENIC DELTA P

4

5

10.0

7.5

5.0

Delta P (psi)

2.5

10” Slime Line

20” Slim Line

10” Super Blue

20” Super Blue

0

0.200.4 0.60.8

1.0

Flow (gpm)

MEDIA

As a division of ResinTech, Inc.®, Aries FilterWorks is the only integrated water filtration media and
cartridge manufacturer providing a premium product at the most competitive cost. Aries builds
technology and knowledge of ion exchange and specialty adsorbents into each cartridge. Strict
quality control over all aspects of cartridge production allows complete traceability of every filter.

3

ORDERING GUIDE

MEDIAPART NUMBER STANDARD HOUSING

2

DIAMETER X LENGTH

MAXIMUM FLOW

RATE (GPM)

AF-10-3695 2.5” x 10” .25 2,000
AF-20-3695 2.5” x 20” 0.5 4,000
AF-10-3695-BB 4.5” x 10” 0.5 4,500

ResinTech®ASM-10-HP

Hybrid Anion Resin

AF-20-3695-BB 4.5” x 20” 1.0 9,000

Specific feed contaminants and pH can effect capacity

Disposal - It is recommended that users review local regulations and consult with local authorities

COMPONENT

Filter cartridge Certified to

NSF/ANSI Standard 42 and

NSF/ANSI Standard 61

for material requirement(s) only.

Filter cartridge Certified to

NSF/ANSI Standard 372
for low lead compliance.

Notes: Ordering information subject to change without notice. Please verify all specifications prior to ordering.

To place an order call [phone] or e-mail [e-mail]

The following is made in lieu of all other warranties expressed or implied. Manufacturer’s and Seller’s only obligation shall be to issue credit against the purchase or replacement of the equipment proved to be defective in material or workmanship. Neither Manufacturer nor Seller
shall be liable for any injury, loss or damage, direct or indirect, special or consequential, arising out of the use of, misuse, or the inability to use such product. The information contained herein is based on technical data and tests which we believe to be reliable and is intended for
use by persons having technical skill at their discretion and risk. Since conditions of use are outside ResinTech’s control, we can assume no liability whatsoever for results obtained or damages incurred through the application of the data presented. This information is not intended
as a license to operate under, or a recommendation to infringe upon, any patent of ResinTech’s or others covering any material or use. The foregoing may not be altered except by written agreement signed by officers of the manufacturer.

on the best method of disposal. Cartridges passthe Toxicity Characteristic Leaching
Procedures (TCLP) according to the EPA

IMPORTANT NOTICE TO USER:

CAPACITY

(GALLONS)

DS-AFArsenic-rev1.7