Aries Filterworks AF-10-3321, AF-10-3326-BB, AF-10-3323, AF-10-3324, AF-10-3328 Data Sheet

KEY FEATURES

•

EFFECTIVELY TREATS SCALE, CORROSION AND IRON PROBLEMS

•

IDEAL FOR SERVICE AND WATER PROCESSING EQUIPMENT

•

MEDIA DISSOLVES SLOWLY FOR EXTENDED PROTECTION

PHOSPHATE CARTRIDGES

Aries FilterWorks 3300 series Phosphate Cartridge contains food grade, slow
melt polyphosphate that dissolves in water to inhibit scale and rust build up.
This filter is used primarily where scale, corrosion and increased amounts of
iron are present in the water source. Phosphate cartridges are also available
in combination with coconut shell GAC. The additional combination improves
taste and odor and removes chlorine.

APPLICATIONS

COMMERCIAL USE -

Effectively reduces scale by separating hardness particles so they cannot pre­cipitate and form deposits when heated. These cartridges are used with many
commercial grade coffee and tea brewing machines, ice makers, beverage

dispensing equipment and water misters.

RESIDENTIAL USE -

As part of a water treatment system, phosphate cartridges are used to main­tain distribution systems. The corrosive properties of water can be attributed
to low pH; high temperature and total dissolved solids Phosphates are used
in water treatment to sequester inorganic contaminants (iron, manganese,
calcium etc.) and to maintain water quality.

LABORATORY • COMMERCIAL • RESIDENTIAL

AF SERIES

PHOSPHATE

COMPONENT

ABOUT PHOSPHATE

As a mineral, phosphate is not seen as harmful and is safe to ingest at reasonable levels. Phosphates are derivatives of phosphoric acid, which contain
phosphorous and oxygen and exist in inorganic and organic forms. They are widely used in water treatment and industrial formulations because of
their superior ability to soften water, control scale and corrosion, and sequester iron, calcium and manganese.

FEATURES & BENEFITS

• USE OF SLOW MELT POLYPHOSPHATE

The phosphate cartridge features 100% slow melt NSF certified polyphosphate

• FITS STANDARD RESIDENTIAL AND INDUSTRIAL SIZE HOUSING

AF Series cartridges are double-open end cartridges that fit standard residential and industrial housings

• OVERSIZED CARTRIDGE FOR MAXIMUM MEDIA FILL

AF Series cartridges have up to 50% higher capacity and extended life, due to the use of larger cartridges

• QUALITY PRODUCED AND MADE IN THE USA

Cartridges are produced by Aries FilterWorks, a division of ResinTech®. Strict quality control over all aspects of cartridge and media production
allows complete traceability of every filter

160 Cooper Road • Building #2, Suite A • West Berlin, NJ 08091-9243, USA • p: 856.626.1550 • f: 856.626.1551 • [e-mail] • ariesfilterworks.com

A Division of ResinTech • Innovations in Ion Exchange

AF SERIES - PHOSPHATE

10.0

1

2

TECHNICAL DATA

10” SLIM 20” SLIM 10” SUPER BLUE 20” SUPER BLUE

Diameter (in.) 3.0” 2.9” 4.6” 4.6”
Length (in.) 9.9” 20.0” 10.0” 20.0”

3

Temperature (˚F.)
Min. 40˚ 40˚ 40˚ 40˚
Max 100˚ 100˚ 100˚ 100˚

Pressure (psi)
Min. 20 20 20 20
Max. 125 125 125 125

Micron Rating (µ) 25 25 25 25
Materials of Construction

1. Gasket TPE TPE TPE TPE

2. End Caps PP ABS ABS ABS

3. Pads PE PE PE PE

4. Body / Tube PP ABS ABS ABS

5. Media*

PP Polypropylene
ABS Acrylonitrile Butadiene Styrene

Phosphate Crystals

PE Polyester
TPE Thermoplastic Elastomer

PHOSPHATE DELTA P

4

5

9.0

8.0

7.0

6.0

5.0

4.0

3.0

Delta P (psi)

2.0

1.0

0

0.501.0 1.52.0

10” Slim Line

20” Slime Line

10” Super Blue

20” Super Blue

Flow (gpm)

MEDIA

As a division of ResinTech, Aries FilterWorks is the only integrated media and cartridge manu­facturer providing added value of a premium product at the most competitive cost. Aries builds
technology and knowledge of ion exchange and specialty adsorbents into each cartridge. Strict
quality control over all aspects of cartridge production allows complete traceability of every filter.

ORDERING GUIDE

3

PART

NUMBER

2

AF-10-3323 12 oz. 2.5” x 10” 1.0 30,000

MEDIA

PHOSPHATE

FILL

STD. HOUSING

DIAMETER X LENGTH

SERVICE FLOW

RATE (GPM)

AF-10-3328 16 oz. 2.5” x 10” 1.0 40,000
AF-10-3324 18 oz. 2.5” x 10” 1.0 50,000
AF-10-3321 24 oz. 2.5” x 10” 1.0 60,000

Phosphate Crystals

(Loose Fill)

AF-20-3322 32 oz. 2.5” x 20” 2.0 80,000
AF-10-3326-BB 48 oz. 4.5” x 10” 3.0 120,000

COMPONENT

Filter cartridge Certified to

NSF/ANSI Standard 42 and

NSF/ANSI Standard 61

for material requirement(s) only.

Filter media Certified to
NSF/ANSI Standard 372
for low lead compliance.

Notes: Ordering information subject to change without notice. Please verify all specifications prior to ordering.

To place an order call [phone] or e-mail [e-mail]

The following is made in lieu of all other warranties expressed or implied. Manufacturer’s and Seller’s only obligation shall be to issue credit against the purchase or replacement of the equipment proved to be defective in material or workmanship. Neither Manufacturer nor Seller
shall be liable for any injury, loss or damage, direct or indirect, special or consequential, arising out of the use of, misuse, or the inability to use such product. The information contained herein is based on technical data and tests which we believe to be reliable and is intended for
use by persons having technical skill at their discretion and risk. Since conditions of use are outside ResinTech’s control, we can assume no liability whatsoever for results obtained or damages incurred through the application of the data presented. This information is not intended
as a license to operate under, or a recommendation to infringe upon, any patent of ResinTech’s or others covering any material or use. The foregoing may not be altered except by written agreement signed by officers of the manufacturer.

AF-20-3327-BB 80 oz. 4.5” x 20” 5.0 200,000

* Capacity based on volume of phosphate

IMPORTANT NOTICE TO USER:

DS-AFPhosphate-rev1.5

CAPACITY*

(PPM)