Aries Filterworks AF-10-1052, AF-10-1051, AF-10-1046-BB, AF-10-1041-BB, AF-20-1046-BB Data Sheet

KEY FEATURES

•

USES RESINTECH® PREMIUM ACID WASHED CARBON

•

PROP 65 COMPLIANT FOR DRINKING WATER APPLICATIONS

•

FITS STANDARD RESIDENTIAL AND INDUSTRIAL HOUSINGS

CARBON CARTRIDGES

Carbon filtration is an inexpensive and effective way to remove chemicals
and contaminants commonly found in tap water. Aries FilterWorks carbon
cartridges are an ideal choice for taste and odor control, chlorine removal, and
organic reduction. Premium carbons are available in coal or coconut shell and
are acid was for a balanced.

California Prop 65 compliance ensures each lot of media complies with EPA
recommended levels of contaminants, including arsenic.

APPLICATIONS

RESIDENTIAL USE -

Carbon cartridges used as part of a water treatment system, improves water
quality by removing harmful contaminants from municipal water supplies.

PRE-TREATMENT TO REVERSE OSMOSIS (RO) -

Provides protection by removing contaminants such as chlorine and organics
that can foul RO membranes.

POINT-OF-USE (POU) DRINKING WATER SYSTEMS -

Cartridge provides a source of clean water and is more cost effective than
purchasing bottled water. It can be used as a standalone filter to reduce or
eliminate: bad tastes and odors, chlorine and organic contaminants in munici­pal water supplies. The use of carbon cartridges significantly improves drinking
water quality.

LABORATORY • COMMERCIAL • RESIDENTIAL

AF SERIES

CARBON

COMPONENT

ABOUT CARBON

Activated carbon has remarkable absorptive properties, which makes it effective in removing chlorine, sediment and Volatile Organic Compounds
(VOCs). The Carbon particles have a large surface area, allowing a small amount of carbon to efficiently filter large volumes of water. As water passes
through the carbon filter many chemicals and contaminants in the water are bonded at a molecular level to the carbon, effectively removing them
from the water. A large percentage of chemical compounds and organic contaminants, that cause taste and odor problems are removed by carbon.

FEATURES & BENEFITS

• USE OF RESINTECH

®

PREMIUM FINE MESH CARBON STANDARD

Optimum mesh size provides more surface area to enhance organic adsorption and chlorine conversion

• AVAILABLE IN ACID WASHED CARBON

Acid washing reduces carbon fines, prevents pH spiking, improves rinse up time, and adds approximately 5% more capacity
to carbon media

• OVERSIZED CARTRIDGE FOR MAXIMUM MEDIA FILL

AF Series cartridges have up to 50% higher capacity and extend cartridge life, due to the use of larger cartridges.

• QUALITY PRODUCED AND MADE IN THE USA

To ensure consistent quality and peace of mind for the consumer all drinking water media are WQA Gold Seal or NSF certified.
Cartridges are produced by Aries FilterWorks, a division of ResinTech®. Strict quality control over all aspects of production allows
complete traceability of every cartridge

160 Cooper Road • Building #2, Suite A • West Berlin, NJ 08091-9243, USA • p: 856.626.1550 • f: 856.626.1551 • [e-mail] • ariesfilterworks.com

A Division of ResinTech • Innovations in Ion Exchange

1

2

4 5

AF SERIES - CARBON

TECHNICAL DATA

10” SLIM 20” SLIM 10” SUPER BLUE 20” SUPER BLUE

Diameter (in.) 3.0” 2.9” 4.6” 4.6”

3

Length (in.) 9.9” 20.0” 10.0” 20.0”
Temperature (˚F.)

Min. 40˚ 40˚ 40˚ 40˚
Max 100˚ 100˚ 100˚ 100˚

Pressure (psi)
Min. 20 20 20 20
Max. 125 125 125 125

Micron Rating (µ) 25 25 25 25
Materials of Construction

1. Gasket TPE TPE TPE TPE

2. End Caps PP ABS ABS ABS

3. Pads PE PE PE PE

4. Body / Tube PP ABS ABS ABS

5. Media*

PP Polypropylene
ABS Acrylonitrile Butadiene Styrene

ResinTech

GAC DELTA P

25.0

20.0

15.0

10.0

Delta P (psi)

5.0

®

Premium Granular Activated Carbon*

PE Polyester
TPE Thermoplastic Elastomer

10” Slim Line

20” Slim Line

10” Super Blue

20” Super Blue

2

COMPONENT

Filter cartridge Certified to

NSF/ANSI Standard 42 and NSF/ANSI Standard 61

for material requirement(s) only.

Filter cartridge Certified to NSF/ANSI Standard 372

for low lead compliance.

0

1.002.0 3.04.0 5.0

Flow (gpm)

MEDIA

As a division of ResinTech, Inc.®, Aries FilterWorks is the only integrated water filtration media and
cartridge manufacturer providing a premium product at the most competitive cost. Aries builds
technology and knowledge of ion exchange and specialty adsorbents into each cartridge. Strict
quality control over all aspects of cartridge production allows complete traceability of every filter.

3

ORDERING GUIDE

MEDIAPART NUMBER STANDARD HOUSING

AF-10-1051 2.5” x 10” .75 1.0 4,000
AF-20-1051 2.5” x 20” 1.0 2.0 9,000
AF-10-1041-BB 4.5” x 10” 2.0 4.0 13,000
AF-20-1041-BB 4.5” x 20” 3.0 5.0 30,000

AF-10-1052 2.5” x 10” .75 1.0 4,000
AF-20-1052 2.5” x 20” 1.0 2.0 9,000
AF-10-1046-BB 4.5” x 10” 2.0 4.0 13,000
AF-20-1046-BB 4.5” x 20” 3.0 5.0 30,000

* Non-acid washed carbon available upon request

ResinTech® Premium

AGC40-AW / AGC50-AW

Acid Washed

Coal GAC*

ResinTech® Premium

AGC40-CSAW / AGC50-CSAW

Acid Washed

Coconut Shell GAC*

DIAMETER x LENGTH OPERATING MAXIMUM

FLOW RATE (GPM)

CAPACITY

(GALLONS)

Notes: Ordering information subject to change without notice. Please verify all specifications prior to ordering.

To place an order call [phone] or e-mail [e-mail]

The following is made in lieu of all other warranties expressed or implied. Manufacturer’s and Seller’s only obligation shall be to issue credit against the purchase or replacement of the equipment proved to be defective in material or workmanship. Neither Manufacturer nor Seller
shall be liable for any injury, loss or damage, direct or indirect, special or consequential, arising out of the use of, misuse, or the inability to use such product. The information contained herein is based on technical data and tests which we believe to be reliable and is intended for
use by persons having technical skill at their discretion and risk. Since conditions of use are outside ResinTech’s control, we can assume no liability whatsoever for results obtained or damages incurred through the application of the data presented. This information is not intended
as a license to operate under, or a recommendation to infringe upon, any patent of ResinTech’s or others covering any material or use. The foregoing may not be altered except by written agreement signed by officers of the manufacturer.

IMPORTANT NOTICE TO USER:

DS-AFCarbon-rev1.6