Aries Automotive S229008 User Manual

INSTALLATION INSTRUCTION

4 INCH STRAIGHT OVAL SIDE BAR Part#

229008

NISSAN X-TERRA 05-11

Note and Products Care:

λ Pictures are only for reference. Actual products may be slightly different but installation is the same.

λ Read Carefully the instruction sheet before installing. Take good care of your vehicle when installing to prevent any

scratch.

λ Check periodically to see if there’s any loose bolts and nuts to ensure safe driving. Protect the finish with a

non-abrasive automotive wax on a regular basis.

Part list:

NO. NAME QTY REMARKS NO. NAME QTY REMARKS

○1

L- Mount bracket

○2

R- Mount bracket

○3

Side bar

2
3
3

○
○
○

5

6

7

Big washers

Lock washer

Lock nut

24 8mm
12 8mm
12 M8

○4

Hex bolt

12

M8×25

Assembly procedure:

Step 1：Check all the contents are available in accordance with the above list (Parts list).

Step 2：Install the mounting bracket using○5○7 and factory threaded studs.

Step 3：Install the side bar to mounting bracket using○

Install picture

Factory 8mm
threaded studs

○5○7

○2

4○5○6

○4○5○6

.

Mounting panel

○1

FRONT

Step 4：After checking for proper clearance and alignment of the

hardware.

Step 5：Installation done.

side bar on the vehicle, fully tighten all

Page 1 of 1