Aries Automotive B35-5004 User Manual

PARTS LIST:

1 – BULL BAR

2 – BRACKETS DRIVER/PASSENGER SIDE

6 – 7/16 X 1 1/4 HEX HEAD BOLTS

6 – 7/16 HEX HEAD NUTS

12 – 7/16 FLAT WASHERS

6 – 7/16 LOCK WASHERS

PROCEDURE:

1 – REMOVE CONTENT’S FROM BOX AND CHECK FOR DAMAGE. VERIFY
ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.

2 – REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH FRONT
BUMPER TEMPORARILY AND SET ASIDE

3 – UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME RAIL
(PASSENGER SIDE SHOWN) INSTALL LOWER BRACKET ONTO FRAME RAIL
BOLTS *LEAVE LOOSE* (SEE FIG # 1)

4 – REPEAT PROCEDURE #3 ON OPPOSITE SIDE

5- INSTALL BULL BAR USING 6 – 7/16 X 1 1/4 HEX HEAD BOLTS, 6 – 7/16 HEX
HEAD NUTS,
12 – 7/16 FLAT WASHERS *LEAVE LOOSE* (SEE FIG # 1)

6 – LEVEL AND ADJUST BULL BAR AS DESIRED. TIGHTEN & TORQUE BOLTS

INSTALLATION INSTRUCTION

BULL BAR PART# B35-5004 / 35-5004

2006-08 DODGE 1500 P/U

7 – MEASURE AND TRIM LOWER URETHANE VALANCE AS DESIRED AND
REINSTALL VALANCE & FRONT BUMPER (Re-install *optional*)
.

Passenger Side Shown

*7/16 Hardware*