Aries Automotive 35-0000 User Manual

INSTALLATION INSTRUCTIONS

PARTS LIST:

1 License Plate Bracket
2 6-1.00mm x 20mm Screws
2 Adhesive Foam Strips

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION.

2. Attach two Adhesive Foam Strips on the Relocation Bracket as shown in Figure 1.

3. Remove center skid plate bolt from Bull Bar. Position Relocation Bracket against cross tube and on top of skid

plate. Attach Relocation Bracket to bull bar using the skid plate bolt removed in this step (Figure 2). Tighten at this
time

4. Attach license plate to Relocation Bracket using the included (2) 6mm x 20mm Screws. Tighten at this time

LICENSE PLATE RELOCATION BRACKET

PART NUMBER 35-0000

Adhesive

Foam Strips

Figure 1

6mm x 20mm

Screws

Figure 2

Skid plate

center bolt

Page 1 of 1 4/2/07 (AM)