Aries Automotive 2550 User Manual
INSTALLATION INSTRUCTION
SPORT BAR PART #2550
2008-10
TOYOTA HIGHLANDER
ATTENTION
λ Please read this installation Menu before installing this part. NOTE: Pictures are for reference only,
actual parts may be different. Installation is the same.
λ You may need to periodically to re-tighten all hardware, such as one month or two month.
λ Please periodically check and retighten all the hardware and clean the investment for a refresh look.
PART LIST
NO. NAME QTY REMARKS NO. NAME QTY REMARKS
9
○1
○2
○3
○4
○5
○6
○7
○8
Install picture
Grille guard 1
Bracket 2
T-Bolt 1 2
Big washer 2 10mm
Lock Washers 2 10mm
Hex nut 2 M10
T-Bolt 2 2
Flat washer 2 6mm
M10×35 ○
M6×26 ○15
Lock Washers 2 6mm
○
10
○
11
12
○
13
○
14
○
○16
Hex nut 2 M6
Hex bolt 4
Big washer 8 12mm
Lock Washers 4 12mm
Hex nut 4 M12
Plastic Clip 4 M10
Plastic Clip 2 M6
M12×35
○1
○3○4○5○6○
15
○11○12○13○14
○
2
○11○12○13○14
○
2
○7○8○9○10○
16
Page 1 of 2
INSTALLATION INSTRUCTION
SPORT BAR PART #2550
TOYOTA HIGHLANDER 08
INSTALLATION STEPS
Step 1：Verify that all parts are present according to the manual.
Step 2：Remove the factory skid plate1 (Fig#1).
Fig#1
Remove the factory skid plate1
Step3：Install the L-bracket to the chassis using the ○3○4○5○6○7○8○9○10○15○16of the vehicle as Fig#2.
1)、Remove the parts in the skid plate 2, open the skid plate 2(look the original hole).
2) 、Install the T bolt2 through the original hole under the chassis, install the plastic clipM6 to the T
bolt2 , Before install the bracket(Note: At the same time, install the T bolt1).
3)
、Install the bracket to the chassis using the○4○5○6○8○9○10.
Fig#2
Step 4：Repeat step 2 、3 for the R- bracket of vehicle to complete installation.
Open the skid plate
2 , put the bracket
in the that.
15
○3○
○7○8○9○10○16 ○3○4○5○6○
15
Step 5：Install the grille guard to the brackets using○
Step 6：Test and make sure that the grille guard is steadily fixed.
Step 7： Installation is finished .
11○12○13○14
as Install picture.
Page 2 of 2
Loading...