Aries Automotive 2059-2 User Manual

INSTALLATION INSTRUCTIONS

Grill Guard # 2059/2059-2

2007 Toyota FJ Cruiser

PART LIST

1 Grill Guard
2 Lower Bracket ( Driver and Passenger)
2 Middle Bracket ( Drive and Passenger)
2 Top Bracket (Drive and Passenger)
4 7/16 x 1 ¼ Hex Head Bolt
4 7/16 Hex Nyloc Nut
8 7/16 Flat Washer
4 5/16 x 1 Hex Head Bolt
4 5/16 Flat Washer
2 3/8 x 1 Button Head Bolt
2 3/8 Hex Nyloc Nut
2 3/8 Flat Washer
4 M6 x 1.0 x 25 Hex Head Bolt
4 M6 Flat Washer
4 3/8-16x 4 ½ Hex Head Bolt
4 3/8 Hex Nyloc Nut
8 3/8 Flat Washer

PROCEDURE:

1. Remove contents from box and check for damage. Verify all parts are present.

Read instructions carefully.

2. Locate frame mount for lower bracket (Driver side shown, See Fig #1). Insert (2)

3/8 x 4 ½ Hex Head bolt, (2) 3/8 Flat washer as shown (See Fig #2). Install lower
bracket using (2) 3/8 Hex nyloc nut, (2) 3/8 Flat washer, leave loose (See Fig #3).

3. Repeat procedure #2 on opposite side

4. Install middle bracket onto radiator support (Driver and Passenger) using (4) M6

x 1.0 x 25mm Hex head bolt, (4) M6 Flat washer and tighten. ( Driver Side shown,
see Fig #5)

5. Insert top bracket in between bumper and grill (See Fig #6) Align and install top

bracket onto middle bracket using (2) 5/16 Hex head bolt, (2) 5/16 Flat washer.
Leave Loose ( Driver side shown, see Fig #7)

6. Repeat procedure #7 on opposite side.

7. Install (1) Grill Guard onto vehicle starting with lower brackets, using (4) 7/16 x 1

¼ Hex head bolts, (4) 7/16 Hex Nyloc Nut, (8) 7/16 Flat washer, then using (2)
3/8 x 1 button head bolts, (2) 3/8 Hex Nyloc nut, (2) 3/8 flat washer onto top
brackets. Leave Loose ( See Fig #8)

8. Level and adjust grill guard and desired then tighten.

Frame
Mount

Fig# 1 Fig# 2

Lower

Bracket

Fig #3

3/8 x 4 ½ Hex