Aries Automotive 203003-2 User Manual

brackets using the
INSTALLATION INSTRUCTIONS
1982-97 FORD RANGER SUPER CAB / 1982-97 MAZDA SUPER CAB
PART # 203003 / 203003-2
ITEM
1 2 3 4 5 6 7 8
9 10 11 12
STEP 1:
STEP 2:
STEP 3:
STEP 4:
1 4 2 2 4 4 2 6 4 4 2 2
Read and understand instructions completely before beginning installation.
Sidebar set consists of a driver and passenger sidebar. Be sure to
determine the correct side before installation.
Replace the factory bolts mounts with the M12 x 100mm hex head bolt.
Place a short spacer between the front mounting bracket and the frame.
Sidebar Set (Driver & Passenger)
M12 x 100 mm hex head bolt
CONTENTS
Mounting Brackets
Short Spacers
Large Spacers
½ x 2” hex head bolt
M12 x 50mm hex head bolt
½” Flat washer
½” Lock washer
½” External tooth washer
M12 x 40mm coupling nut
M12 hex nut
TOOLS
¾” Socket 18mm Socket 19mm Socket
Ratchet
STEP 5:
STEP 6:
Secure front mounting bracket to the M12 bolt using a ½” external tooth
washer and M12 hex nut. Leave loose.
To install rear mounting bracket, place a large spacer between the rear
mounting bracket and the frame. Secure rear mounting bracket to the M12
bolt using M12 x 40mm coupling nut, M12 x 50mm hex head bolt and ½” flat
& external tooth washer. Leave loose.
Place the sidebar up to the mounting brackets and bolt to the mounting
½” x 2” hex head bolt, flat and lock washer. Leave loose.
1
P.O. Box 1687
STEP 7:
Make any final adjustments to the alignment of the sidebar and tighten all
bolts. Repeat for the opposite side.
STEP 8:
FIGURE 1
You may need to periodically re-tighten the bolts.
M12 x 100mm hex head
M12 x
bolt
100mm hex head bolt
½ x 2” hex head bolt
Large Spacer
M12 x 40mm coupling nut
Rear mounting bracket
Short Spacer
Front mounting
½ x 2”
bracket
hex head bolt
FINISH PROTECTION- ARIES PRODUCTS HAVE A HIGH FINISH THAT MUST BE MAINTAINED SUCH AS ANY OTHER HIGH FINISH PRODUCT ON THE VEHICLE. PROTECT THE FINISH WITH A NON-ABRASIVE AUTOMOTIVE WAX. THE USE OF SOAP, POLISH, OR WAX THAT CONTAINS ABRASIVES IS DETRI MENTAL, AS THE COMPOUNDS SCRATCH THE FINISH AND OPEN IT TO CORROSION.
DISCLAIMER- BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER FROM THE INSTALLATION AND USE OF ARIES PRODUCTS. ARIES PRODUCTS ARE SOLD AS DECORATIVE ACCESSORIES AND SHOULD NOT BE RELIED UPON AS PROTECTION FOR THE VEHICLE OR OCCUPANTS IN THE EVENT OF A COLLISION OR ROLL OVER. ARIES AUTOMOTIVE ASSUMES NO LIABILITY FOR INJURY, LOSS, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN THE EVENT OF A COLLISION OR ROLLOVER.
Aries Automotive Accessories, Inc.
Lomita, CA 90717
Thank you for choosing Aries products
For Customer Service Support please
call: (888) 800-2743
2
Loading...