Aries Automotive 202006-2 User Manual
STEP BAR ASSEMBLIES
INSTRUCTIONS
APPLICATION: 1999-06 TOYOTA TUNDRA EXTENDED CAB
2004-06 TOYOTA TUNDRA DOUBLE CAB
202006-2
1
ITEM
1,2 2 STEP BAR, PASSENGER (1) AND DRIVER (2)
3,4 2 FRONT BRACKET, PASSENGER (3) AND DRIVER (4)
5,6 2 REAR BRACKET
7 1 FRONT MOUNT TAB ASSEMBLY, PASSENGER
8 1 FRONT MOUNT TAB ASSEMBLY, DRIVER
9 2 SPACER WASHER
10 6 1/2-13 X 1.75” HEX HEAD BOLT
11 8 1/2” FLAT WASHER
12 8 1/2” LOCK WASHER
13 4 1/2-13 HEX NUT
STEP 1.
STEP 2.
STEP 3.
ARIES
STEP 4.
STEP 5.
QTY
CONTENTS -
, PASSENGER (5) AND DRIVER (6)
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely before beginning.
Locate the rectangular holes in frame towards the front of the vehicle. Insert front mount tab assemblies into
the hole from the inside of frame. Attach front brackets as shown. Hand tighten.
Attach rear brackets as shown. Hand tighten. Place the spacer washer under the head of the hex
head bolt and insert through frame from the inside of frame.
Attach step bars as shown. Hand tighten.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque
value is 64 Ft. Lbs. for 1/2” fasteners.
NOTE:
3
5
4
6
TOOLS -
3/4” SOCKET
3/4” WRENCH
6” EXTENSION
RATCHET
TORQUE WRENCH
7
8
PLACE BEHIND BODY MOUNT
FINISH PROTECTION
Aries products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive au tomotive wax, (e.g.
Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to
corrosion.
ON DOUBLE CAB.
11
12
13
FORWARD
11
10
12
5
INSTALLATION VIEW OF PASSENGER SIDE, DRIVER SIDE OPPOSITEINSTALLATION VIEW OF PASSENGER SIDE, DRIVER SIDE OPPOSITE
10
9
RECTANGULAR
FRAME HOLE
8
7
11
12
13
11
10
12
3
1
Loading...