Aries Automotive 200112-2 User Manual
INSTALLATION INSTRUCTIONS
2005-09 LANDROVER LR3
ATTENTION
λ
Please read this installation Menu before installing this part. When install it, pay
attention to protecting your vehicles.
PART # 200112 / 200112-2
PART LIST
No. Name Qty Remarks No. Name Qty Remarks
1
Sided bar(left) 1
○
2
Sided bar(right) 1
○
3
Front bracket(left) 1
○
4
Front bracket(right) 1
○
5
Rear braket(left) 1
○
6
Rear bracket(right)
○
7
T-bolt 6
○
M8×35 ○
8
Flat washer 6 8mm
○
9
Spring washer 6 8mm
○
10
Hex nut 6 M8
○
11
Hex bolt 8
○
12
Flat washer 16 10mm
○
13
Spring washer 8 10
○
14
Hex nut 8 M10
M10×30
1
○
○2 ○3 ○4 ○5 ○6 ○7 ○8 ○9 ○
1
○
○2 ○3 ○4 ○5 ○6 ○7 ○8 ○9 ○
10
10
11
○
○12 ○13 ○
14
Page 1 of 4
STEP ONE : Before you start the installation, make sure that you have all the components
listed above.
STEP TWO : Please protect your vehicles from being scratched during the process of
installing the side bar.
STEP THREE : Determine left and right bracket.
STEP FOUR : Remove original bolt from the vehicle as shown in Fig. 1.
STEP FIVE :Install part No.○3 to chassis of the vehicles with part No.○
7○8○9○10
and
original bolt as shown in Fig. 1.
STEP SIX : Install part No.○5 to chassis of the vehicle with part No.○
7○8○9○10
as shown in
Fig. 1.
STEP SEVEN : Install part No.○1 to part No.○3 ○5 with part No. ○
11○12○13○14
as shown in
FIG 1.
STEP EIGHT: Remove original bolt from the vehicle as shown in Fig. 2.
STEP NINE: Install part No.○
4
to chassis of the vehicles with part No.○
7○8○9○10
and
original bolt as shown in Fig. 2.
STEP TEN : Install part No.○
6
to chassis of the vehicle with part No.○
7○8○9○10
as shown
in Fig. 2.
STEP EVELEN :Install part No.○
2
to part No.○4 ○6with part No. ○
11○12○13○14
as shown in
Fig 2.
STEP TEELVE:Test and make sure that the side bar is steadily fixed.
STEP THRITEEN :Installation is finished .
Page 2 of 4
Loading...