ARIES C81, C91 User Manual

Series C81/C91 Standard Dual Beam Wire Wrap Edge-Grip Sockets
FEATURES:
• Dual beam, edge-grip contacts provide high retention with positive wiping action.
• Removable cover provides lower profile.
• Side-to-side stackable.
SPECIFICATIONS:
• Dual beam contact is Grade APhosphor Bronze Alloy, 1/2 hard.
• Contact plating: (all over 50μ” [1.27μm] Nickel per SAE-AMS-QQ-N-290) Tin = 200μ” [5.08μm] min Matte Tin per ASTM B545-97. Tin/Lead = 50-150μ” [1.27-3.81μm] min. 90/10 Tin/Lead per MIL-P-81728. Gold = 10μ” [0.25μm] min. Gold per MIL-G-45204.
• Contact current rating=1.5 Amp.
• Contact resistance=20 mOhms initial.
• Insulation resistance=100 MOhms @ 500 VDC per MIL-STD-1344, method
3003.1.
• Dielectric withstanding voltage=1000 VAC.
• Operating temperature= -67°F to 221°F [-55°C to 105°C] Tin
= -67°F to 257°F [-55°C to 125°C] Gold
• Solderability: MIL-STD-202, method 208 less heat aging.
• Accepts leads up to .011 x .018 ± .003 [.28 x .46 ± .08] or .021 [.53] diameter.
• Accepts leads .100-.200 [2.54-5.08] long with cover.
MOUNTING CONSIDERATIONS:
•Suggested PCB hole size=.046± .002 [1.17 ± .05] dia.
No. of P ins
Dim. “A”
Dim. “B”
Centers “C”
Dim. “D” (max)
Dim. “E”
8
.465 [11. 81]
.300 [7. 62]
.300 [7. 62]
.400 [10. 16]
---
14
.765 [19. 43]
.600 [15. 24]
.300 [7. 62]
.400 [10. 16]
.300 [7. 62]
16
.865 [21. 97]
.700 [17. 78]
.300 [7. 62]
.400 [10. 16]
.400 [10. 16]
18
.965 [24. 51]
.800 [20. 32]
.300 [7. 62]
.400 [10. 16]
.400 [10. 16]
20
1.065 [27. 05]
.900 [22. 86]
.300 [7. 62]
.400 [10. 16]
.400 [10. 16]
22
1.180 [29. 97]
1.000 [25. 40]
.400 [10. 16]
.500 [12. 70]
.500 [12. 70]
24
1.280 [32. 51]
1.100 [27. 94]
.600 [15. 24]
.700 [17. 78]
.500 [12. 70]
28
1.480 [37. 59]
1.300 [33. 02]
.600 [15. 24]
.700 [17. 78]
.500 [12. 70]
36
1.880 [47. 75]
1.700 [43. 18]
.600 [15. 24]
.700 [17. 78]
.800 [20. 32]
40
2.080 [52. 83]
1.900 [48. 26]
.600 [15. 24]
.700 [17. 78]
.800 [20. 32]
CXXXX-XX TL
ORDERING INFORMATION
C81 series:
-04=closed entry
-54=open entry C91 series:
-00=closed entry
-50=open entry
Pin plating: 91=Gold 81=Tin
Socket series
No. of pins (see table)
ALL DIMENSIONS: INCHES [MILLIMETERS]
All tolerances ± .005 [.13]
unless otherwise specified
CONTACT
DETAIL
12003
REV.C
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice.
Plating option: Tin/Lead
Frenchtown, NJ USA TEL: (908) 996-6841 FAX: (908) 996-3891
http://www.arieselec.com • info@arieselec.com
abc
Loading...