ARIES 600 User Manual

Series 600
DIP Headers with Coined Contacts

FEATURES:

• Aries offers a full line of DIP headers, available with either
coined or screw machine contacts. Consult Data Sheet No.
12035 for screw machine contacts.

• Snap-on, protective covers are available for all sizes shown
below and accommodate .125 [3.18] to .750 [9.05] compo­nent heights. Consult Data Sheet No. 12033 for protective
covers.

• Body cavity design provides additional clearance for compo­nent mounting.

SPECIFICATIONS:

• Standard body material is black UL94V-0 4/6 Nylon.

• Coined contacts are Brass, 1/2 hard.

• Contact plating:

-T = 200u” [5.08μm] min. Matte Tin per ASTM B545-97 over
50u” [1.27μm] min. Nickel per QQ-N-290

-G = 10u”[.25μm] Gold per MIL-G-45204 over 50u”[1.27μm]
min. Nickel per QQ-N-290.

-TL = 200u”[5.08μm]90/10 Tin/Lead per MIL-T-10727 Type I

over 50u” [1.27μm] min. Nickel per QQ-N-290.

• Contact current rating=2 Amps.

• Operating temperature=221°F [105°C] Tin plating,

=257°F [125°C] Gold plating.

• Fork contact accepts up to .025 [.64] diameter leads.

MOUNTING CONSIDERATIONS:

•Suggested PCB hole size=.035 ± .002 [.89 ± .05] dia.

ALL DIMENSIONS: INCHES [MILLIMETERS]

All tolerances ± .005 [.13]

unless otherwise specified

.300 [7.62] CENTERS BODY

(with numbered pin

positions, no ribs)

Centers “C” Dim. “D” Dim. “E”

.300 [7.62] .395 [10.03] .252 [6.40]
.400 [10.16] .495 [12.57] .352 [8.94]
.600 [15.24] .695 [17.65] .552 [14.02]

“A”=(NO. OF PINS PER ROW X .100 [2.54]) + .050 [1.27]
”B”=(NO. OF PINS PER ROW - 1) X .100 [2.54]

Consult Data

Sheet No.

12033 for snap-

on protective

covers.

Consult Data

Sheet No.

12035 for screw

machine contacts.

Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.

ORDERING INFORMATION

XX-600-XX

Series

Plating:
0=Tin
0TL =Tin/Lead
1=Gold

Pin style:
1=Fork pin
2=Post pin

No. of pins:
.300 [7.62] centers: 4 thru 20
.400 [10.16] centers: 22
.600 [15.24] centers: 24, 28, 40

.400 [10.16] AND .600 [15.24] CENTERS BODY

(with ribs)

12032

REV.F

NORTH AMERICA

Frenchtown, NJ USA
TEL:[phone]
FAX:[phone]

EUROPE

TEL: [phone]
FAX: [phone]
[e-mail]

http://www.arieselec.com • [e-mail]

abc

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED