ARIES 536 User Manual

Series 536 PLCC Test & Burn-in Zero
Insertion Force Sockets

Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.

FEATURES:

• A choice of several pin count devices can be inserted with­out bending or otherwise damaging the legs, since no
force is required to either insert or remove the
component from the socket.

• Compatible with pick and place operations.

• Corner posts provide positive package registration.

• Socket accepts JEDEC Types MO-047, MO-016, and other
ceramic, leadless or J-lead packages (shims required).
Consult factory.

SPECIFICATIONS:

• Socket body is black UL 94V-0 Glass-filled Polyphenylene
Sulfide (PPS).

• Contacts are Beryllium Copper Alloy 172.

• Contact plating is 12μ [.30μm] min. Gold per MIL-G-45204
over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290.

• Hardware is Stainless Steel.

• Contact current rating=1 Amp.

• Contact resistance=30 mOhms max. (initial).

• Insulation resistance=1000 MOhms min.

• Dielectric strength=700 VAC cont. for 1 minute.

• Self inductance=8.9 ηH max. at 10 MHz.

• Operating temperature=-67°F to 338°F [-55°C to 170°C].

• Life cycle: 10,000 insertions minimum.

MOUNTING CONSIDERATIONS:

• See Data Sheet No. 10007.

No. of Pi ns Dim. "A" Dim. "B" Dim. "C" Dim. "D" Dim. "E" Dim. "F" Dim. "G" Dim. "H"

20 1.024 [26.0] 1.457 [ 37.0] 2.087 [53.0] 1.748 [44.4] 0.752 [ 19.1] 0.618 [ 15.7] 1.256 [31.9] 1. 358 [34.5]
28 1.181 [30.0] 1.610 [ 40.9] 2.213 [ 56.2] 1.791 [45.5] 0. 787 [20.0] 0. 669 [17.0] 1.417 [36.0] 1.519 [38. 6]
32 1.175 [29.8] 1.585 [ 40.3] 2.291 [ 58.2] 1.772 [45.0] 0. 720 [18.3] 0. 689 [17.5] 1.378 [35.0] 1.488 [37. 8]
44 1.339 [34.0] 1.772 [ 45.0] 2.480 [ 63.0] 1.941 [49.3] 0. 787 [20.0] 0. 787 [20.0] 1.575 [40.0] 1.673 [42. 5]
52 1.500 [38.1] 1.921 [ 48.8] 2.787 [ 70.8] 2.091 [53.1] 0. 819 [20.8] 0. 827 [21.0] 1.700 [43.2] 1.823 [46. 3]
68 1.653 [42.0] 2.343 [ 59.5] 3.047 [ 77.4] 2.425 [61.6] 0. 925 [23.5] 0. 906 [23.0] 1.929 [49.0] 2.244 [57. 0]
84 1.890 [48.0] 2.579 [ 65.5] 3.370 [ 85.6] 2.645 [67.2] 0. 925 [23.5] 1. 063 [27.0] 2.173 [55.2] 2.484 [63. 1]

ORDERING INFORMATION

XX-536-11

No. of pins
(see table )

Series

Gold over
Nickel plating

Solder tail pin

ALL DIMENSIONS: INCHES [MILLIMETERS]

All tolerances ± .005 [.13]

unless otherwise specified

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

10006

REV.D

LATCH DESIGN MAY DIFFER FROM SIZE TO SIZE

See Data Sheet No.
10007 for mounting

considerations

NORTH AMERICA

Frenchtown, NJ USA
TEL:[phone]
FAX:[phone]

EUROPE

TEL: [phone]
FAX: [phone]
[e-mail]

http://www.arieselec.com • [e-mail]

abc