Ariens 924503 - 1336, 924334 - 1128, 924120 - 1024, 924333 - 1024, 924504 - 936 User Manual

...
Sno-Thro
Parts Manual
Models
924119 -1028 924120 -1024 924333 -1024 924334 -1128 924502 -1332 924503 -1336
924504 - 936
®
Supercedes 02487800, A,B,C
Printed in USA
HE
T
Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.
For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals.
Hardware descriptions are given in decimals.
.063 1/16 .563 9/16
.125 1/8 .625 5/8
.188 3/16 .688 11/16
.250 1/4 .750 3/4
.313 5/16 .813 13/16
.375 3/8 .875 7/8
.438 7/16 .938 15/16
.500 1/2 1.00 1
ERVICE
S
When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine.
Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
M
ANUAL
Decimals to Fractions
AND
EPLACEMENT
R
P
ARTS
RODUCT
P
A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored..
Y
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
2. Contact Your Dealer.
TO SPEED PARTS ORDERING:
1. Know the model and serial numbers of your unit.
2. Know the part number required.
3. Know the quantity required.
4. Know the part description.
S
OUR
They will guide you through safe and proper operation and maintenance.
They contain specifications on your unit. If your questions are not answered in these manuals,
go to step number two.
Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency.
A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original.
If your questions are not resolved by the support staff, ask for the manager or owner.
When contacting your Dealer supply your model and serial numbers.
EGISTRATION
R
ATISFACTION
I
I
S
MPORTANT
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
2
ODELS
M
Domestic
Model 924119 (1028)
10 H.P. 28” Sno-Thro Serial No. 000101 and up
Model 924120 (1024)
10 H.P. 24” Sno-Thro Serial No. 000101 and up
International
Model 924333 (1024)
10 H.P. 24” Sno-Thro Serial No. 000101 and up
Model 924334 (1128)
11 H.P. 28” Sno-Thro Serial No. 000101 and up
Global
Model 924502 (1332)
13 H.P. 32” Sno-Thro Serial No. 000101 and up
Model 924503 (1336)
13 H.P. 36” Sno-Thro Serial No. 000101 and up
Model 924504 (936)
9 H.P. 36” Sno-Brush Serial No. 000101 and up
ABLE
T
D
ECALS
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
NGINE
E
Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . 6
M
AIN
F
Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8
Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13
PERATORS
O
Handlebar and Controls . . . . . . . . . . . . . . . . . . . . . . 14
Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LOWER
B
Auger and Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . . 21
Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . 22
Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . . 24
Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . . 26
B
RUSH
Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brush Drive Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
O
AND
RAME
F
ONTENTS
C
RIVE
D
ONTROLS
C
E
LECTRICAL
Continuity Diagram (333, 334) . . . . . . . . . . . . . . . . . 32
Wiring Diagram (333, 334). . . . . . . . . . . . . . . . . . . . 33
Continuity Diagram (502, 503) . . . . . . . . . . . . . . . . . 34
Wiring Diagram (502, 503)) . . . . . . . . . . . . . . . . . . . 35
Continuity & Wiring Diagrams (119, 120, 504). . . . . 36
S
YSTEMS
3
© Copyright 2000, 2001 Ariens Company
Model 924119, 120, 333, 334, 502, 503
1028
08084300A
D
ECALS
4
1
5
3
6
2
7
7
7
Item Part No. Qty. Description
1 08085000 1 Decal-Dash 1028 (119)
08084900 1 Decal- 1024 Dash (120) 08085300 1 Decal- 1024/1128 Dash (333, 334) 08085100 1 Decal- 1332/1336 Dash (502, 503) 08084800 1 Decal- 936 Dash (504)
2 08084200 1 Decal- 1024 Front Panel (120, 333)
08084300 1 Decal- 1028 Front Panel (119) 08084400 1 Decal- 1128 Front Panel (334) 08084500 1 Decal- 1332 Front Panel (502) 08084600 1 Decal- 1336 Front Panel (503)
3 07746400 1 Decal-Ariens Jewel 4 07733900 1 Decal-Primer 5 07797600 1 Decal- Cast Iron Bore 6 07751100 1 Decal-A+ 7 62447800 1 Decal-Set-Danger (119, 120, 333, 334, 502, 503) 8 07864400 1 Decal-Differential Lock (120, 333, 334, 502, 503)
8
PS0414
4
936
Power Brush
08084700A
1
CAUTION / PRUDENCE / CUIDADO
Engage traction drive clutch before attachment clutch. Enclencher l'embrayage de traction avant l'embrayage de l'outil. Activar el embrague de la transmisión de dirección de la tracción antes del embrague del accesorio.
D
ECALS
Model 924504
2
4
5
07797600
3
08084800
6
CAUTION / PRUDENCE / CUIDADO
Read the operator’s manual. Lire le manuel d’utilisation. Leer el manual del operador.
Adjust brush height before operating. Régler la hauteur du balai avant l’utilisation. Ajustar la altura de la escobilla antes de ponerla en funcionamiento.
Engage traction drive clutch before attachment clutch. Enclencher l’embrayage de traction avant l’embrayage de l’outil. Activar el embrague de la transmisión de dirección del tractor antes del embrague del accesorio.
Operating on irregular terrain could cause the brush to dig in and drive the machine rearward. Le balai risque de se planter dans le sol et d’entraîner la machine vers l’arrière lors d’utilisation sur terrain accidenté. El uso en terreno irregular puede hacer que la escobilla se entierre y hacer que la unidad se desplace hacia atrás.
07873100B
078644A
7
8
PS0870
Item Part No. Qty. Description
1 08084800 1 Decal- 936 Dash 2 08084700 1 Decal- 936 Front Panel 3 07746400 1 Decal-Ariens Jewel 4 07733900 1 Decal-Primer 5 07797600 1 Decal- Cast Iron Bore 6 07751100 1 Decal-A+ 7 07873100 1 Decal, Caution 8 07864400 1 Decal-Differential Lock
5
E
Model 924119, 120, 333, 334, 502, 503, 504
51
3
NGINE
49
AND
B
ELT
D
RIVE
48
50
54
47
53
2
1
46
56
55
31
4
14
32
33
34
43
9
23
35
5
6
29
52
30
7
28
5
8
36
26
37
10
22
5
22
38
40
45
15
44
21
39
11
17
27
20
26
25
19
24
41
12
42
11
13
8
18
16
5
23
PS0448
Item Part No. Qty. Description
1 06529800 1 Nut-Locking-Center .31-18 2 06310500 1 Washer-Lock Internal .31 3 08262200 1 Engine, 10HP L Head Tecumseh - 120 Volt (119)
08260700 1 Engine, 10HP OHV Tecumseh- 120 Volt (120) 08260800 1 Engine, 10HP OHV Tecumseh- 12 Volt (333) 08261000 1 Engine, 11HP Tecumseh OHV 12 Volt (334) 08261100 1 Engine, 13HP Tecumseh 12 Volt (502, 503)
08261200 1 Engine, 9HP Tecumseh OHV (504) 4 02410900 1 Belt Finger 5 06435700 5 Washer-Flat-Steel .38 x .875 x .083 6 06308600 2 Washer-Locking .31 x .078 7 05947300 2 Bolt-Hex .31-24 x .75 Grade 5
8 06005500 4 Screw-Set .31-18 x .38 9 02489100 1 Engine Sheave (119, 120, 333, 334, 502, 504)
02435700 1 Engine Sheave (503)
6
E
NGINE
Item Part No. Qty. Description
10 06601800 1 Key-Straight .25 x 1.75 x .25 11 07412000 2 Screw-Tap .25-20 x .50 12 02489000 1 Belt Cover 13 07238500 1 V-Belt (119)
07238400 1 V-Belt (120, 333, 334, 504)
07238300 1 V-Belt (502)
07236200 1 V-Belt (503)
14 07325700 1 Pulley-V 8.40 x 1.0 with Key 15 07211200 1 V-Belt -Traction Drive (119, 120, 333, 334, 504)
07236100 1 V-Belt -Traction Drive (502, 503)
16 07005300 3 Bolt-Serrated Round Head Slotted .31-18 x .75 (503) 17 07307000 1 Pulley-V 9.0 x 1.25 18 02438900 1 Hub (119, 120, 333, 334, 502, 503)) 19 05947900 2 Bolt-Hex .25-20 x .50 Grade 5 (120, 333, 334, 502, 503, 504) 20 06529700 2 Nut-Locking-Center .25-20 (120, 333, 334, 502, 503, 504) 21 02423651 1 Belt Retainer (120, 333, 334, 502, 503, 504) 22 06529800 2 Nut-Locking Center .31-18 23 05947500 2 Bolt-Hex .31-18 x 1.25 Grade 5 24 02434851 1 Idler Arm 25 01213100 1 Bearing Spacer 26 02457400 2 Idler 27 06437200 1 Washer-Flat-Steel .344 x .688 x .065 28 01103100 1 Spacer 29 02453751 1 Idler Arm 30 06530300 1 Nut-Locking-Nylon .625-18 31 01026000 1 Wave Washer 32 06436500 1 Washer-Flat-Steel .382 x .812 x .023 33 06707000 1 Pin-Cotter .09 x 1.00 34 08309400 1 Spring-Tension .80 x .73 x 3.06 35 05503700 1 Bushing-Flange-Nylon .500 x .625 x .312 x .750 36 02442800 1 Activating Shaft 37 08317200 1 Spring-Tens .047 x .44 x 3.37 38 07412100 2 Screw-Tapping 10-24 x .375 39 02435300 1 Return Clip 40 06707400 1 Pin-Cotter .09 x .50 41 02434751 1 Bracket 42 02435400 1 Pin-Clevis 43 02411000 1 Belt Finger 44 06530400 3 Nut-Locking-Flange .312-18 (503) 45 07411600 3 Screw-Tap .25-20 x .37 46 06306800 1 Washer-Lock-External .262 x .502 x .026 (503) 47 06533200 1 Nut-Hex .25-20 (503) 48 02483100 1 Cord-Extension-110V (119, 120) 49 21533500 1 Plug-Spark 50 07531800 1 Fuel Cap 51 07532000 1 Key, Push/Pull-Tecumseh (119, 120) 52 05502100 1 Bushing-Flange .500 x.625 x.500 x.750 53 07533200 1 Boot, Eyelet Terminal(333, 334, 502, 503) 54 06436700 1 Washer-Flat-Steel .323 x .625 x .062 55 06529200 3 Nut-Hex .312-18 56 06307400 3 Washer-Locking .312 x .097 Heavy
AND
B
D
ELT
RIVE
Model 924119, 120, 333, 334, 502, 503, 504
7
S
PEED
Model 924119, 120, 333, 334, 502, 503, 504
S
ELECTOR
2
AND
F
1
3
RAME
10
6
14
31
22
4
8
17
29
21
18
12
5
16
26
9
13
7
11
30
15
28
27
7
20
23
19
24
25
24
PS0485
8
S
PEED
Item Part No. Qty. Description
1 07516700 1 Hole Plug 2 05708600 2 Ring-Retainer-External .500 x .015 3 07509600 1 Knob 4 02444851 1 Rod 5 08318400 1 Spring, Tension .055 x .33 x 1.31 6 05947700 1 Bolt-Hex .25-20 x 1.00 7 06529800 1 Nut-Locking-Center .312-18 8 02462600 1 Pivot 9 06529700 1 Nut-Locking-Center .25-20
10 05948000 1 Bolt-Hex .31-18 x 3.50 11 06713500 2 Pin-Hair Internal .08 x .18 x 1.18 12 02487600 1 Rod, Shift-Upper 13 02487700 1 Rod, Shift-Lower 14 02477900 1 Pivot, Rod 15 06706900 1 Pin-Cotter .09 x .75 16 06436500 1 Washer-Flat-Steel .382 x .812 x .023 17 01215100 1 Clevis Pin .370/.375 x .688 18 02476300 1 Arm, Shift 19 02485359 1 Main Frame 20 02401800 2 Bolt Strap (119, 120, 333, 334, 504)
02483500 2 Bolt Strap (502, 503)
21 05531500 1 Bushing-Sleeve .328 x .50 x .75 22 05947500 1 Bolt-Hex .31-18 x 1.25 Grade 5 23 07411600 2 Screw-Tapping .250-20 x .37 Hex Washer Head 24 07411500 4 Screw-Tapping .31-18 x .50 Hex Washer Head 25 02477159 1 Cover, Bottom 26 06437200 1 Washer-Flat-Steel .344 x .688 x .065 27 06441900 1 Washer-Flat-Steel .531 x 1.06 x .095 28 06707300 1 Pin-Cotter .12 x .75 29 07028500 2 Bolt-Hex Flanged Whiz Lock Head .38-16 x .75 30 06219800 2 Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5 31 06537500 2 Nut-Locking Wing .25-20
S
ELECTOR
F
AND
Model 924119, 120, 333, 334, 502, 503, 504
RAME
9
Model 924119
W
HEELS
AND
A
XLE
8
12
13
2
11
14
10
1
8
9
33
7
4
3
8
5
10
6
9
13
8
11
PS0800
Model 924120, 333, 334, 502, 503, 504
16
14
15
34
35
33
17
39
3
36
38
37
20
32
18
21
22
19
23
25
26
27
31
28
29
30
24
10
PS0790
W
HEELS
AND
A
XLE
Model 924119, 120, 333, 334, 502, 503, 504
Item Part No. Qty. Description
1 07150300 2 Tire/Wheel Assembly 16 x 6.50 - 8 (119) 2 07150500 2 Wheel 6.50 x 8.00 (119) 3 07121800 2 Tire 4.80-8 (120, 333)
07121600 2 Tire 16 x 6.50-8 (119, 334, 502, 503, 504) 4 02483200 1 Shaft, Axle (119) 5 05718400 1 Ring, Retaining .875 x .050 (119) 6 02439600 1 Spur Gear (119) 7 06600800 1 Woodruff Key .25 x .875 x .375 (119) 8 06436900 4 Washer-Flat-Steel .88 x 1.25 x .062 (119) 9 00301700 2 Bearing Flange (119)
10 05409300 2 Bearing, Ball .88 x 1.75 x .50 (119) 11 01014200 2 Flange, Bearing (119) 12 07053700 2 Pin-Lock .31 x 1.75 (119) 13 06529700 6 Nut-Locking-Center .25-20 (119) 14 07103700 2 Tube 4.00 x 8 (120, 333)
07108700 2 Tube 6.50 x 8 (119, 334, 502, 503, 504)
15 07107600 2 Wheel 4.80-8 (120, 333)
07107700 2 Wheel 6.50-8 (334, 502, 503, 504)
16 07121900 2 Tire/Wheel Assembly #34-4.80/4.00 x 8 (120, 333)
07121700 2 Tire/Wheel Assembly #35-16 x 6.50 (334, 502, 503, 504)
17 02437151 1 Axle-Right Hand (502, 503)
02440951 1 Axle-Right Hand (120, 333, 334, 504)
18 52405400 AR Axle Assembly-Left Hand (Contains Items 19-23) (502, 503)
52405500 AR Axle Assembly-Left Hand (Contains Items 19-23) (120, 333, 334, 504)
19 02437051 1 Axle-Left Hand (502, 503)
02441051 1 Axle-Left Hand (120, 333, 334, 504)
20 05505700 1 Bushing-Sleeve .750 x .814 x .750 (120, 333, 334, 502, 503, 504) 21 06307000 1 Washer-Locking .250 x .047 (120, 333, 334, 502, 503, 504) 22 07012600 1 Fitting-Lube .25-28 x .256 (120, 333, 334, 502, 503, 504) 23 05502900 1 Bushing-Sleeve .562 x .625 x .625 (120, 333, 334, 502, 503, 504) 24 52405900 1 Lockout Hub Assembly (Contains Items 25 - 27 , 30 , 31) (120, 333, 334, 502, 503, 504) 25 01037400 1 Pin (120, 333, 334, 502, 503, 504) 26 08300700 1 Spring-Compression .028 x.34 x 1.062 (120, 333, 334, 502, 503, 504) 27 01037200 1 Lockout Hub (120, 333, 334, 502, 503, 504) 28 05948100 1 Screw-Cap .25-20 x 2.00 Grade 8 (120, 333, 334, 502, 503, 504) 29 06530900 1 Nut-Jam-Nylon .250-20 (120, 333, 334, 502, 503, 504) 30 05803200 1 Pin-Roll .093 x 1.00 (120, 333, 334, 502, 503, 504) 31 01037500 1 Knob (120, 333, 334, 502, 503, 504) 32 52405300 1 Differential Assembly (120, 333, 334, 502, 503, 504) 33 05803000 1 Pin Roll .188 x 1.50 34 07412200 8 Screw-Tap .50-20 x .62 Hex Head (120, 333, 334, 502, 503, 504) 35 02457859 2 Bearing Retainer (120, 333, 334, 502, 503, 504) 36 05417700 2 Bearing-Ball 1.13 x 2.19 x .63 (120, 333, 334, 502, 503, 504) 37 06437400 2 Washer-Flat-Steel 1.140 x 1.718 x .134 38 07028600 8 Bolt Serrated Neck Slotted .25-20 x .50
39 06530100 8 Nut-Locking-Flange .250-20
11
R
Model 924119, 120, 333, 334, 502, 503, 504
EDUCTION
D
RIVE
24
13
14
23
3
15
1
4
14
18
6
22
7
19
2
5
10
9
8
11
17
2
12
16
14
22
21
20
PS0463
Item Part No. Qty. Description
1 02477300 1 Hex Shaft 2 06437200 2 Washer-Flat-Steel .344 x .688 x .065 3 02476800 1 Hex Shaft 4 05531600 1 Spacer .450 x .75 x 1.60 5 06436600 1 Washer-Flat-Steel .505 x .880 x .072 6 00308500 1 Bearing Flange 7 05435200 1 Bearing-Ball .437 x 1.375 x .437 8 02414100 1 Bearing Flange 9 06530600 4 Nut-Locking Dual Face 10-24
10 06536400 1 Nut-Locking-Center .438-14 11 05718300 1 Ring-Retaining External .31 x .025 12 07530500 1 Idler 13 06529800 1 Nut-Locking-Center .31-18 14 06436100 6 Washer-Flat-Steel .630 x 1.005 x .062 15 02436700 1 Pinion Shaft 16 02477700 1 Roller Chain #41-34 Pitches 17 07029700 1 Drive Fitting-Hydraulic 18 05802900 1 Pin Roll .156 x 1.00 19 05800900 1 Pin, Roll .125 x 1.00 20 52403200 1 Pinion and Sprocket Assembly (Contains Items 21 , 22) 21 02436800 1 Pinion and Sprocket 22 05502600 2 Bushing-Flange .625 x .750 x .50 x .875 23 06435700 2 Washer-Flat-Steel .38 x .875 x .083 24 06536100 1 Nut, Jam .31-18
12
Loading...
+ 26 hidden pages