Ariens 924116 - 1028, 924117 - 1024, 924300 - 1024 User Manual

Page 1
Sno-Thro
Parts Manual
Models
924116 - 1028 924117 - 1024 924300 - 1024 924505 - 1332 924506 - 1336 924507 - 936 924508 - 1128
®
02494000A 8/01
Supersedes 02494000
Printed in USA
Page 2
HE
T
Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.
For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals.
Hardware descriptions are given in decimals.
.063 1/16 .563 9/16
.125 1/8 .625 5/8
.188 3/16 .688 11/16
.250 1/4 .750 3/4
.313 5/16 .813 13/16
.375 3/8 .875 7/8
.438 7/16 .938 15/16
.500 1/2 1.00 1
ERVICE
S
When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine.
Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
M
ANUAL
Decimals to Fractions
AND
EPLACEMENT
R
P
ARTS
RODUCT
P
A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored.
Y
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
2. Contact Your Dealer.
TO SPEED PARTS ORDERING:
1. Know the model and serial numbers of your unit.
2. Know the part number required.
3. Know the quantity required.
4. Know the part description.
S
OUR
They will guide you through safe and proper operation and maintenance.
They contain specifications on your unit. If your questions are not answered in these manuals,
go to step number two.
Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency.
A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original.
If your questions are not resolved by the support staff, ask for the manager or owner.
When contacting your Dealer supply your model and serial numbers.
EGISTRATION
R
ATISFACTION
I
I
S
MPORTANT
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
2
Page 3
ODELS
M
Domestic
Model 924116 (1028)
10 H.P. 28” Sno-Thro Serial No. 000101 and up
Model 924117 (1024)
10 H.P. 24” Sno-Thro Serial No. 000101 and up
International
Model 924300 (1024)
10 H.P. 24” Sno-Thro Serial No. 000101 and up
Global
Model 924505 (1332)
13 H.P. 32” Sno-Thro Serial No. 000101 and up
Model 924506 (1336)
13 H.P. 36” Sno-Thro Serial No. 000101 and up
Model 924507 (936)
9 H.P. 36” Sno-Brush Serial No. 000101 and up
Model 924508 (1128)
11 H.P. 28” Sno-Thro Serial No. 000101 and up
ABLE
T
D
ECALS
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
NGINE
E
Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . 6
M
AIN
F
Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8
Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13
PERATORS
O
Handlebars Lever Controls, Panel and Dash . . . . . . 14
Cables and Controls. . . . . . . . . . . . . . . . . . . . . . . . . 16
LOWER
B
Chute, Auger and Battery. . . . . . . . . . . . . . . . . . . . . 18
Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . . 21
Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . 22
Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . . 24
Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . . 26
B
RUSH
O
AND
RAME
F
ONTENTS
C
RIVE
D
ONTROLS
C
Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brush Drive Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
E
LECTRICAL
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Continuity Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . 33
Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
S
YSTEMS
3
© Copyright 2000, 2001 Ariens Company
Page 4
Model 924116, 117, 300, 505, 506, 508
D
ECALS
1
3
7
4
2
6
5
Item Part No. Qty. Description
1 08092200 1 Decal, 1332/1336 Control (505, 506)
08092300 1 Decal, 1024/1128 Control (300, 508) 08092400 1 Decal,1024 Control (117) 08092500 1 Decal, Control 1028 (116)
2 08092700 1 Decal, Front Panel- 1336 (506)
08092800 1 Decal, Front Panel- 1332 (505) 08092900 1 Decal, Front Panel- 1128 (508) 08093000 1 Decal, Front Panel- 1024 (117, 300) 08093100 1 Decal, Front Panel- 1028 (116)
3 07733900 1 Decal, Primer 4 07797600 1 Decal, Cast Iron Bore 5 08094000 1 Decal, Danger 6 07864400 1 Decal, Differential Lock 7 08093900 1 Decal, Danger - Rotating Parts
PS0416
4
Page 5
D
ECALS
Model 924507
1
3
4
07797600
6
2
CAUTION / PRUDENCE / CUIDADO
Read the operators manual. Lire le manuel dutilisation. Leer el manual del operador.
Adjust brush height before operating. Régler la hauteur du balai avant lutilisation. Ajustar la altura de la escobilla antes de ponerla en funcionamiento.
Engage traction drive clutch before attachment clutch. Enclencher lembrayage de traction avant lembrayage de l’outil. Activar el embrague de la transmisión de dirección del tractor antes del embrague del accesorio.
Operating on irregular terrain could cause the brush to dig in and drive the machine rearward. Le balai risque de se planter dans le sol et dentraîner la machine vers larrière lors d’utilisation sur terrain accidenté. El uso en terreno irregular puede hacer que la escobilla se entierre y hacer que la unidad se desplace hacia atrás.
078644A
5
07873100B
Item Part No. Qty. Description
1 08092100 1 Decal- 936 Control 2 08092600 1 Decal- 936 Dash 3 07733900 1 Decal-Primer 4 07797600 1 Decal- Cast Iron Bore 5 07873100 1 Decal, Caution 6 07864400 1 Decal-Differential Lock
PS0871
5
Page 6
E
NGINE
Model 924116, 117, 300, 505, 506, 507, 508
51
3
49
AND
B
ELT
D
RIVE
48
50
54
47
1
2
53
46
56
55
31
4
14
32
33
34
43
9
23
35
5
6
29
52
30
7
28
5
8
36
26
37
10
22
5
38
40
45
22
15
44
21
39
11
17
27
20
26
25
19
24
41
12
42
11
13
8
18
16
5
23
PS0448
Item Part No. Qty. Description
1 06529800 1 Nut-Locking-Center .31-18 2 06310500 1 Washer-Lock Internal .31 3 08262200 1 Engine, 10HP L Head Tecumseh - 120 Volt (116)
08260700 1 Engine, 10HP OHV Tecumseh- 120 Volt (117) 08260800 1 Engine, 10HP OHV Tecumseh- 12 Volt (300) 08261000 1 Engine, 11HP Tecumseh OHV 12 Volt (508) 08261100 1 Engine, 13HP Tecumseh 12 Volt (505, 506)
08261200 1 Engine, 9HP Tecumseh OHV (507) 4 02410900 1 Belt Finger 5 06435700 5 Washer-Flat-Steel .38 x .88 x .083 6 06308600 2 Washer-Locking .31 x .078 7 05947300 2 Bolt-Hex .31-24 x .75 Grade 5
8 06005500 4 Screw-Set .31-18 x .38 9 02489100 1 Engine Sheave (116, 117, 300, 505, 507, 508)
02435700 1 Engine Sheave (506)
6
Page 7
E
NGINE
Item Part No. Qty. Description
10 06601800 1 Key-Straight .25 x 1.75 x .25 11 07412000 2 Screw-Tap .25-20 x .50 12 02489000 1 Belt Cover 13 07238500 1 V-Belt (116)
07238400 1 V-Belt (117, 300, 508, 507)
07238300 1 V-Belt (505)
07236200 1 V-Belt (506)
14 07325700 1 Pulley-V 8.40 x 1.0 with Key 15 07211200 1 V-Belt -Traction Drive (116, 117, 300, 507, 508)
07236100 1 V-Belt -Traction Drive (505, 506)
16 07005300 3 Bolt-Serrated Round Head Slotted .31-18 x .75 17 07307000 1 Pulley-V 9.0 x 1.25 18 02438900 1 Hub (116, 117, 300, 505, 506, 508) 19 05947900 2 Bolt-Hex .25-20 x .50 Grade 5 (117, 300, 505, 506, 507, 508) 20 06529700 2 Nut-Locking-Center .25-20 (117, 300, 505, 506, 507, 508) 21 02423651 1 Belt Retainer (117, 300, 505, 506, 507, 508) 22 06529800 2 Nut-Locking Center .31-18 23 05947500 2 Bolt-Hex .31-18 x 1.25 Grade 5 24 02434851 1 Idler Arm 25 01213100 1 Bearing Spacer 26 02457400 2 Idler 27 06437200 1 Washer-Flat-Steel .34 x .69 x .065 28 01103100 1 Spacer 29 02453751 1 Idler Arm 30 06530300 1 Nut-Locking-Nylon .63-18 31 01026000 1 Wave Washer 32 06436500 1 Washer-Flat-Steel .38 x .81 x .023 33 06707000 1 Pin-Cotter .09 x 1.00 34 08309400 1 Spring-Tension .80 x .73 x 3.06 35 05503700 1 Bushing-Flange-Nylon .50 x .63 x .31 x .75 36 02442800 1 Activating Shaft 37 08317200 1 Spring-Tens .05 x .44 x 3.37 38 07412100 2 Screw-Tapping 10-24 x .38 39 02435300 1 Return Clip 40 06707400 1 Pin-Cotter .09 x .50 41 02434751 1 Bracket 42 02435400 1 Pin-Clevis 43 02411000 1 Belt Finger 44 06530400 3 Nut-Locking-Flange .31-18 (116, 117, 300, 506, 507, 508) 45 07411600 3 Screw-Tap .25-20 x .37 46 06306800 1 Washer-Lock-External .26 x .50 x .026 (300, 505, 506, 508) 47 06533200 1 Nut-Hex .25-20 (300, 505, 506, 508) 48 02483100 1 Cord-Extension-110V (116, 117) 49 21533500 1 Plug-Spark 50 07531800 1 Fuel Cap 51 07532000 1 Key, Push/Pull-Tecumseh (116, 117) 52 05502100 1 Bushing-Flange .50 x.63 x.50 x.75 53 07533200 1 Boot, Eyelet Terminal (300, 505, 506, 508) 54 06436700 1 Washer-Flat-Steel .32 x .63 x .062 55 06529200 3 Nut-Hex .31-18 56 06307400 3 Washer-Locking .31 x .097 Heavy
AND
B
D
ELT
RIVE
Model 924116, 117, 300, 505, 506, 507, 508
7
Page 8
S
PEED
Model 924116, 117, 300, 505, 506, 507, 508
2
4
5
6
S
1
ELECTOR
3
AND
F
RAME
14
10
22
17
21
8
18
12
19
16
26
13
11
24
9
15
28
27
7
20
23
24
25
PS0486
8
Page 9

SPEED SELECTOR AND FRAME

Model 924116, 117, 300, 505, 506, 507, 508
Item Part No. Qty. Description
1 07533500 1 Knob, Ball-Black 1-.41, .38-16 2 02492551 1 Lever, Shift-Weldment 3 05962900 1 Bolt-Hex .38-16 x 2.25 Grade 5 4 08335700 1 Spring-Compression .13 x .78 x 1.25 5 06435900 1 Washer-Flat-Steel .44 x 1.00 x .083 6 06529600 1 Nut-Locking-Center .38-16 7 06529800 1 Nut-Locking-Center .31-18 8 07028500 2 Bolt-Hex Flanged Whiz Lock Head .38-16 x .75 9 06219800 2 Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5
10 06537500 2 Nut-Locking Wing .25-20 11 06713500 1 Pin-Hair Internal .08 x .18 x 1.18 12 02492800 1 Rod, Shift-Upper 13 02487700 1 Rod, Shift-Lower 14 02493000 1 Pivot, Rod 15 06706900 1 Pin-Cotter .09 x .75 16 06436500 1 Washer-Flat-Steel .38 x .81 x .023 17 01215100 1 Clevis Pin .37/.38 x .69 18 02476300 1 Arm, Shift 19 02485359 1 Main Frame 20 02401800 2 Bolt Strap (116, 117, 300, 507, 508)
02483500 2 Bolt Strap (505, 506)
21 05531500 1 Bushing-Sleeve .33 x .50 x .75 22 05947500 1 Bolt-Hex .31-18 x 1.25 Grade 5 23 07411600 2 Screw-Tapping .25-20 x .37 Hex Washer Head 24 07411500 4 Screw-Tapping .31-18 x .50 Hex Washer Head 25 02477159 1 Cover, Bottom 26 06437200 1 Washer-Flat-Steel .34 x .69 x .065 27 06441900 1 Washer-Flat-Steel .53 x 1.06 x .095 28 06707300 1 Pin-Cotter .12 x .75
9
Page 10
Model 924116

WHEELS AND AXLE

8
12
13
2
11
14
10
1
8
9
33
7
4
3
8
5
10
6
9
13
8
11
PS0800
Model 924117, 300, 505, 506, 507, 508
16
14
15
34
35
33
17
39
3
36
38
37
20
32
18
21
22
19
23
25
26
27
31
28
29
30
24
10
PS0790
Page 11

WHEELS AND AXLE

Model 924116, 117, 300, 505, 506, 507, 508
Item Part No. Qty. Description
1 07150300 2 Tire/Wheel Assembly 16 x 6.50 - 8 (116) 2 07150500 2 Wheel 6.50 x 8.00 (116) 3 07121800 2 Tire 4.80-8 (117, 300)
07121600 2 Tire 16 x 6.50-8 (116, 505, 506, 507, 508) 4 02483200 1 Shaft, Axle (116) 5 05718400 1 Ring, Retaining .88 x .05 (116) 6 02439600 1 Spur Gear (116) 7 06600800 1 Woodruff Key .25 x .88 x .38 (116) 8 06436900 4 Washer-Flat-Steel .88 x 1.25 x .062 (116) 9 00301700 2 Bearing Flange (116)
10 05409300 2 Bearing, Ball .88 x 1.75 x .50 (116) 11 01014200 2 Flange, Bearing (116) 12 07053700 2 Pin-Lock .31 x 1.75 (116) 13 06529700 6 Nut-Locking-Center .25-20 (116) 14 07103700 2 Tube 4.00 x 8 (117, 300)
07108700 2 Tube 6.50 x 8 (116, 505, 506, 507, 508)
15 07107600 2 Wheel 4.80-8 (117, 300)
07107700 2 Wheel 6.50-8 (505, 506, 507, 508)
16 07121900 2 Tire/Wheel Assembly #34-4.80/4.00 x 8 (117, 300)
07121700 2 Tire/Wheel Assembly #35-16 x 6.50 (505, 506, 507, 508)
17 02437151 1 Axle-Right Hand (505, 506)
02440951 1 Axle-Right Hand (117, 300, 507, 508)
18 52405400 AR Axle Assembly-Left Hand (Contains Items 19-23) (505, 506)
52405500 AR Axle Assembly-Left Hand (Contains Items 19-23) (117, 300, 507, 508)
19 02437051 1 Axle-Left Hand (505, 506)
02441051 1 Axle-Left Hand (117, 300, 507, 508)
20 05505700 1 Bushing-Sleeve .75 x .81 x .75 (117, 300, 505, 506, 507, 508) 21 06307000 1 Washer-Locking .25 x .05 (117, 300, 505, 506, 507, 508) 22 07012600 1 Fitting-Lube .25-28 x .26 (117, 300, 505, 506, 507, 508) 23 05502900 1 Bushing-Sleeve .56 x .63 x .63 (117, 300, 505, 506, 507, 508) 24 52405900 1 Lockout Hub Assembly (Contains Items 25-27, 30, 31) (117, 300, 505, 506, 507, 508) 25 01037400 1 Pin (117, 300, 505, 506, 507, 508) 26 08300700 1 Spring-Compression .03 x.34 x 1.06 (117, 300, 505, 506, 507, 508) 27 01037200 1 Lockout Hub (117, 300, 505, 506, 507, 508) 28 05948100 1 Screw-Cap .25-20 x 2.00 Grade 8 (117, 300, 505, 506, 507, 508) 29 06530900 1 Nut-Jam-Nylon .25-20 (117, 300, 505, 506, 507, 508) 30 05803200 1 Pin-Roll .09 x 1.00 (117, 300, 505, 506, 507, 508) 31 01037500 1 Knob (117, 300, 505, 506, 507, 508) 32 52405300 1 Differential Assembly (117, 300, 505, 506, 507, 508) 33 05803000 1 Pin Roll .19 x 1.50 34 07412200 8 Screw-Tap .50-20 x .62 Hex Head (117, 300, 505, 506, 507, 508) 35 02457859 2 Bearing Retainer (117, 300, 505, 506, 507, 508) 36 05417700 2 Bearing-Ball 1.13 x 2.19 x .63 (117, 300, 505, 506, 507, 508) 37 06437400 2 Washer-Flat-Steel 1.14 x 1.72 x .13 38 07028600 8 Bolt Serrated Neck Slotted .25-20 x .50
39 06530100 8 Nut-Locking-Flange .25-20
11
Page 12

REDUCTION DRIVE

Model 924116, 117, 300, 505, 506, 507, 508
24
13
14
23
3
15
1
4
14
18
6
22
7
19
2
5
21
12
8
2
10
9
11
17
16
14
22
20
PS0463
Item Part No. Qty. Description
1 02477300 1 Hex Shaft 2 06437200 2 Washer-Flat-Steel .34 x .69 x .065 3 02476800 1 Hex Shaft 4 05531600 1 Spacer .45 x .75 x 1.60 5 06436600 1 Washer-Flat-Steel .51 x .88 x .072 6 00308500 1 Bearing Flange 7 05435200 1 Bearing-Ball .44 x 1.38 x .44 8 02414100 1 Bearing Flange 9 06530600 4 Nut-Locking Dual Face 10-24
10 06536400 1 Nut-Locking-Center .44-14 11 05718300 1 Ring-Retaining External .31 x .025 12 07530500 1 Idler 13 06529800 1 Nut-Locking-Center .31-18 14 06436100 6 Washer-Flat-Steel .630 x 1.01 x .062 15 02436700 1 Pinion Shaft 16 02477700 1 Roller Chain #41-34 Pitches 17 07029700 1 Drive Fitting-Hydraulic 18 05802900 1 Pin Roll .16 x 1.00 19 05800900 1 Pin, Roll .13 x 1.00 20 52403200 1 Pinion and Sprocket Assembly (Contains Items 21, 22) 21 02436800 1 Pinion and Sprocket 22 05502600 2 Bushing-Flange .63 x .75 x .50 x .88 23 06435700 2 Washer-Flat-Steel .38 x .88 x .083 24 06536100 1 Nut, Jam .31-18
12
Page 13
12
7

FRICTION WHEEL DRIVE

13
7
11
Model 924116, 117, 300, 505, 506, 507, 508
14
16
8
1
9
18
21
26
5
3
2
10
6
4
1
15
17
Item Part No. Qty. Description
1 07411500 8 Screw-Tapping .31-18 x .50 2 02445500 1 Spindle Hub 3 00300300 1 Friction Disc 4 02445400 1 Disc Hub 5 05702100 1 Ring-Retaining-Internal 1.75 x .062 6 06436900 1 Washer-Flat-Steel .88 x 1.25 x .062 7 05502600 2 Bushing-Flange .63 x .750 x .50 x .88 8 05512600 1 Bushing-Sleeve .88 x 1.25 x .53 9 06530500 1 Nut-Locking-Nylon .88-14
10 05409300 1 Bearing-Ball .88 x 1.75 x .50 11 02444500 1 Carrier 12 52404600 AR Friction Wheel Assembly (Contains 1-11) 13 02477000 1 Carrier Shaft 14 05802900 2 Pin-Roll .16 x 1.00 15 01054600 1 Drive Plate 16 02407100 1 Drive Disc Spacer 1.30 x .76 x .19 17 02407600 1 Spindle 18 06600600 1 Key-Woodruff .13 x .50 x .20 19 02458200 1 Housing Mount 20 05435100 2 Bearing .63 x 1.38 x .43 21 02415500 1 Bearing Spacer 22 00303400 1 Roller 23 06437200 1 Washer-Flat-Steel .34 x .69 x .065 24 06308600 1 Washer-Lock .31 x .078 25 05946900 1 Bolt-Hex .31-18 x 1.00 Grade 5 26 02458100 1 Spindle Housing
19
20
20
22
24
25
23
PS0452
13
Page 14

HANDLEBARS, LEVER CONTROLS, PANEL AND DASH

Model 924116, 117, 300, 505, 506, 507, 508
14
13
1
Rear View
17
23
16
13
16
8
17
16
25
28
26
11
14
15
24
17
10
27
12
3
2
6
20
7
9
4
22
18
7
19
5
21
14
PS0813
Page 15

HANDLEBARS, LEVER CONTROLS, PANEL AND DASH

Model 924116, 117, 300, 505, 506, 507, 508
Item Part No. Qty. Description
1 52415100 1 Handlebar, Upper Right Hand (Includes Hand Warmer) 2 52415200 1 Handlebar, Upper Left Hand (Includes Hand Warmer) 3 02491651 1 Panel, Sub-Weldment 4 06212100 2 Bolt-Round Head Square Neck .31-18 x 1.50 Grade 5 5 06529800 2 Nut-Locking-Center .31-18 6 06220100 2 Bolt-Round Head Square Neck .25-20 x 1.25 7 06529700 7 Nut-Locking-Center .25-20 8 02491851 1 Handlebar, Lower 9 07511800 2 Bumper
10 02486451 1 Bracket, Cable Support (116, 505, 506) 11 05952500 2 Bolt-Hex .25-20 x 1.50 Grade 5 (116, 505, 506) 12 06529700 2 Nut-Locking-Center .25-20 (116, 505, 506) 13 02493100 1 Lever, Right Hand-Coated 14 02493200 1 Lever, Left Hand-Coated 15 06437200 4 Washer-Flat-Steel .34 x .69 x .065 16 02492100 2 Cam, Interlock 17 05803400 4 Pin-Roll .125 x .75 18 52415300 AR Panel with Decal - 936 (507)
52415400 AR Panel with Decal - 1024 (117)
52415500 AR Panel with Decal - 1028 (116)
52415600 AR Panel with Decal - 1332 (505)
52415700 AR Panel with Decal - 1024 (300)
52415800 AR Panel with Decal - 1128 (508)
52415900 AR Panel with Decal - 1336 (506)
19 07511200 1 Bushing, Snap (116, 117, 300, 508) 20 02485000 1 Headlamp, Oval with 1156 Bulb 21 07416700 3 Screw-Tapping 10-16 x .75 Hi-Lo 22 06214300 5 Bolt-Round Head Square Short Neck.25-20 x .50 23 06221600 4 Bolt-Round Head Square Neck .31-18 x 2.25 24 06446800 4 Washer, Saddle-.32 x .94 x .062 25 06307400 4 Washer-Locking .31 x .097 Heavy 26 06439400 4 Washer-Flat-Steel .33 x .88 x .062 27 07531700 4 Knob- Wing .31-18 28 07028500 4 Bolt-Screw Hex Flanged Whiz Lock Head .38-16 x .75
15
Page 16

CABLES AND CONTROLS

Model 924116, 117, 300, 505, 506, 507, 508
12
8
13
13
5
6
8
9
12
1
11
12
13
10
3
2
1
7
4
15
4
5
6
9
7
Rear View
8
10
2
11
3
14
16
18
21
17
19
20
24
26
22
25
23
28
32
27
29
30
31
PS0880
16
Page 17

CABLES AND CONTROLS

Model 924116, 117, 300, 505, 506, 507, 508
Item Part No. Qty. Description
1 08337100 2 Spring-Tension .056 x .50 x 3.76 2 02492200 1 Arm, Interlock 3 05970400 1 Bolt-Hex .38-16 x 4.50 Grade 5 (116, 505, 506)
05957800 1 Bolt-Hex .38-16X3.00 Grade 5 (117, 300, 507, 508) 4 06529600 1 Nut-Locking-Center .38-16 5 06436200 1 Washer-Flat-Steel .41 x .81 x .065 (116, 505, 506) 6 08320900 1 Spring-Compression .19 x .56 x 1.62 (116, 505, 506) 7 02463900 1 Pressure Flange (116, 505, 506) 8 01123800 2 Washer, Friction (116, 505, 506) 9 02492300 1 Lever, Deector (116, 505, 506)
10 08337000 1 Spring-Tension .05 x .44 x 38 x 1.45 11 07533500 1 Knob, Ball-Black 1-.41, .38-16 (116, 505, 506) 12 06437300 2 Washer-Flat-Steel .28 x .62 x .065 (117, 300, 507, 508)
06437300 3 Washer-Flat-Steel .28 x .62 x .065 (116, 505, 506)
13 06707400 2 Pin-Cotter .09 x .50 (117, 300, 507, 508)
06707400 3 Pin-Cotter .09 x .50 (116, 505, 506)
14 06947500 1 Cable, Auger 15 06947400 1 Cable, Traction 16 02485551 1 Lever, Clutch 17 05802600 1 Pin-Roll .16 x .88 18 06530200 1 Nut-Locking-Nylon .31-18 19 01054200 1 Spacer, Adapter 20 02422700 1 Adapter 21 05947000 1 Bolt-Hex .31-18 x .75 Grade 5 22 02422800 1 Yoke, Clutch Engagement 23 06529800 3 Nut-Locking-Center .31-18 24 02408600 1 Spacer 1.00 x .64 x .38 25 06005500 1 Screw-Set .31-18 x .38 Socket Head 26 02213500 1 Rod Adapter 27 52404700 1 Spring Assembly 28 06707400 1 Pin-Cotter .09 x .50 29 06707000 2 Pin-Cotter .09 x 1.00 30 02406900 1 Rod, Fork Pivot 31 08309400 1 Spring-Tension .08 x .73 x 3.06 Weldment 32 02427200 1 Clutch Fork
17
Page 18

CHUTE, AUGER AND BATTERY

Model 924116, 117, 300, 505, 506, 508
11
8
1
5
36
6
22
7
55
16
7
18
45
60
46
48
47
49
52
51
50
58
36
43
53
30
56
31
20
14
12
15
54
21
15
13
17
17
22
13
57
19
59
10
4
2
3
36
44
40
42
41
38
37
39
10
18
9
25
33
32
23
34
35
27
30
29
24
26
25
35
28
PS0437
Page 19

CHUTE, AUGER AND BATTERY

Model 924116, 117, 300, 505, 506, 508
Item Part No. Qty. Description
1 04912900 1 Cover, Battery (300, 505, 506, 508) 2 A/R Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L (300, 505, 506, 508) 3 02484559 1 Battery Tray (506)
02488659 1 Battery Tray (300, 508, 505) 4 06220400 2 Bolt-Round Head Square Neck .25-20 x 7.00 (300, 505, 506, 508) 5 06437300 6 Washer-Flat-Steel .28 x .62 x .065 (300, 505, 506, 508) 6 06537500 2 Wing Nut-Locking .25-20 (300, 505, 506, 508) 7 06436200 2 Washer-Flat-Steel .41 x .81 x .065 (300, 505, 506, 508) 8 03679000 1 Solenoid (300, 505, 506, 508) 9 05946800 4 Bolt-Hex .25-20 x .75 Grade 5 (300, 505, 506, 508)
10 06530100 10 Nut-Lock-Flange .25-20 11 02484459 1 Cover, Solenoid (300, 505, 506, 508) 12 02479800 1 Rod, Chute (116, 505, 506) 13 06435900 4 Washer-Flat-Steel .44 x 1.00 x .083 14 08335200 1 Spring, Compression (116, 505, 506) 15 06437300 2 Washer-Flat-Steel .28 x .62 x .065 (116, 505, 506) 16 01320200 1 Wave Washer (117, 300, 508) 17 05718500 2 Ring, Retaining-External .22 x .035 (116, 505, 506) 18 06416800 1 Washer-Plastic .39 x .88 x .062 (117, 300, 508) 19 07412000 2 Screw-Tapping .25-20 x .50 Hex Washer Head (300, 505, 506, 508) 20 52414200 1 Blower Housing w/Decal 28" (116)
52414300 1 Blower Housing w/Decal 24" (117)
52414400 1 Blower Housing w/Decal 24" (300)
52414500 1 Blower Housing w/Decal 28" (508)
52414600 1 Blower Housing w/Decal 32" (505)
52414700 1 Blower Housing w/Decal 36" (506)
21 02483059 2 Runner, Skid Shoe-1/2" Flange (117, 300, 508, 505, 506)
02483859 2 Runner, Double Flange (116)
22 06529600 4 Nut-Locking .38-16 (116, 505, 506)
06529600 5 Nut-Locking .38-16 (117, 300, 508)
23 06435700 5 Washer-Flat-Steel .38 x .88 x .083 (116, 117, 300, 508)
06435700 7 Washer-Flat-Steel .38 x .88 x .083 (505)
06435700 6 Washer-Flat-Steel .38 x .88 x .083 (506)
24 02479159 1 Scraper Blade 28" (116)
01016459 1 Scraper Blade 24" (117, 300)
00620159 1 Scraper Blade 28" (508)
00620859 1 Scraper Blade 32" (505)
03519259 1 Scraper Blade 36" (506)
25 06529800 7 Nut-Locking-Center .31-18 (116, 117, 300, 508)
06529800 9 Nut-Locking-Center .31-18 (505)
06529800 8 Nut-Locking-Center .31-18 (506)
26 07012600 4 Fitting-Lube .25-28 x .256 27 52410700 1 Rake, Left Hand - 28" (16" O.D.) (508) (Includes Item 26)
52410800 1 Rake, Right Hand - 28" (16" O.D.) (508) (Includes Item 26)
52413600 1 Rake, Right Hand - 24" (16" O.D.) (117, 300) (Includes Item 26)
52413500 1 Rake, Left Hand - 24" (16" O.D.) (117, 300) (Includes Item 26)
52411800 1 Rake, Left Hand - 28" (15" O.D.) (116) (Includes Item 26)
52411900 1 Rake, Right Hand - 28" (15" O.D.) (116) (Includes Item 26)
52412200 1 Rake, Left Hand - 32" (16" O.D.) (505) (Includes Item 26)
52412300 1 Rake, Right Hand - 32" (16" O.D.) (505) (Includes Item 26)
52412500 1 Rake, Left Hand - 36" (16" O.D.) (506) (Includes Item 26)
52412600 1 Rake, Right Hand - 36" (16" O.D.) (506) (Includes Item 26)
19
Page 20

AUGER AND BATTERY

Model 924116, 117, 300, 505, 506, 508
Item Part No. Qty. Description
28 51001500 2 Shear Bolt Service Assembly (Includes Item 25) 29 00301700 1 Bearing Flange (116,117, 300, 508, 505)
03086200 1 Bearing Flange (506)
30 06211800 2 Bolt-Round Head Square Neck .38-16 x .75 (116, 505, 506)
06211800 3 Bolt-Round Head Square Neck .38-16 x .75 (117, 300, 508)
31 06212000 3 Bolt-Round Head Square Neck .38-16 x 1.00 32 05418200 1 Bearing-Ball 1.0 x 2.0 x .56 (506)
05406300 1 Bearing-Ball .75 x 1.75 x .50 (116, 117, 300, 505, 508)
33 07028600 6 Bolt-Serrated-Neck-Slotted .25-20 x .50 34 06212200 5 Bolt-Round Head Square Neck .312-18 x .62 (116, 117, 300, 505, 508)
06212200 7 Bolt-Round Head Square Neck .312-18 x .62 (505)
06212200 6 Bolt-Round Head Square Neck .312-18 x .62 (506)
35 06436300 4 Washer-Flat Steel 1.01 x 1.51 x .062 36 06529700 6 Nut-Locking-Center .25-20 37 02437451 2 Bearing Support 38 05503500 2 Bushing-Flange 1.00 x 1.12 x .62 x 1.50 39 06436400 2 Washer-Flat-Steel .51 x 1.44 x .13 40 06306600 2 Washer-Lock .50 x .151 41 05947100 2 Bolt-Hex .50-13 x 1.00 Grade 5 42 08316400 1 Spring-Tension .06 x .56 x 8.00 43 06441100 1 Washer-Flat-Steel .52 x .83 x .062 (117, 300, 508) 44 02440551 1 Arm Extension (116) 45 02448100 1 Clevis Pin 46 06707500 1 Pin-Cotter .06 x .75 47 05946800 1 Bolt-Hex .25-20 x .75 (116) 48 52404800 1 Brake Arm Assembly (Contains Items 49, 50) 49 02217800 1 Brake Lining 50 06806700 2 Rivet-Tubular .19 x .44 51 07028500 2 Bolt-Hex Flanged Whizloc Head .38-16 x .75 52 07002600 2 Nut-Retainer .38-16 53 01014200 1 Bearing Flange (116, 117, 300, 505, 508)
03086100 1 Bearing Flange (506)
54 06437200 1 Washer-Flat-Steel .34 x .69 x .065 (116, 505, 506) 55 06945400 1 Cable, Control (116, 505, 506) 56 52411000 1 Chute, Discharge with Remote (116)
52414800 1 Chute- Electric (505, 506)
57 05947900 2 Bolt-Hex .25-20 x .50 Grade 5 58 06908200 1 Clamp-Cushioned (116, 505, 506) 59 07533200 2 Boot, Eyelet Terminal (300, 505, 506, 508) 60 52410900 1 Chute, Discharge without Remote (117, 300, 508) 61 06308400 2 Washer-Locking .25 x.06 Regular
20
Page 21

GEAR CASE-ALUMINUM

Model 924116
2
4
5
7
3
1
26
Item Part No. Qty. Description
1 05803700 2 Pin-Roll .25 x 1.75 2 02477251 1 Impeller-.75 I.D.x 12" O.D. 3 05618900 1 Seal, Oil .75 x 1.38 x .31 4 05511200 1 Bushing-Flange .75 x 1.00 x .75 x 1.25 5 03210300 1 Thrust Collar 6 05804500 1 Pin-Groove .19 x 1.25 7 06600100 1 Key-Woodruff .19 x .88 x .38 8 52413400 AR Case, Gear-Large Bore-28" (Contains Items 3-6, 9-18, 20-25) 9 07412900 1 Screw-Tapping .38-16 x .50
10 06219700 2 Bolt-Round Head Square Neck .25-20 x 1.25 Grade 5 11 05618800 2 Seal 1.00 x 1.38 12 02470600 1 LS Case Half Left Hand Large Bore 13 05530100 2 Bushing-Flanged 1.00 x 1.12 x 1.50 x .50 14 52402600 1 Worm Shaft and and Gear Assembly 15 00925700 1 Locktite Gasket 518 850 cc Cartridge 16 02470700 1 LS Case Half Right Hand Large Bore 17 06530100 4 Nut-Locking-Flange .25-20 18 07413000 2 Screw-Tapping 10-24 x .75 19 05803000 2 Pin-Roll .19 x 1.50 20 05806900 1 Pin-Groove .31 x 1.44 21 06416600 2 Washer-Flat-Steel 1.01 x 1.54 x .062 22 05520600 1 Bushing-Flange .50 x 1 x .75 23 02479300 1 Rake Shaft 28" 24 06219800 2 Bolt-Round Head Square Neck .25-20 x 1.00 25 06442500 1 Washer-Fiber .44 x .66 x .032 26 00008000 1 Ariens 16 Oz. Bottle of L2 Lube (2 oz. capacity)
6
15
17
18
16
17
19
14
11
13
21
21
13
12
20
22
8
23
10
11
9
24
25
19
PS0692
21
Page 22
Model 924117, 300, 505, 506, 508
3
4

GEAR CASE-CAST IRON

1
5
1
30
7
9
2
31
22
23
13
25
6
8
10
19
28
21
26
24
27
11
11
9
12
29
13
17
14
15
16
8
18
26
27
20
19
22
PS0472
Page 23

GEAR CASE-CAST IRON

Item Part No. Qty. Description
1 05801500 2 Pin-Roll .31 x 1.75 2 02476951 1 Impeller -1.00 I.D. x 14" O.D. (506)
00643151 1 Impeller -1.00 I.D. x 12" O.D. (117, 300, 508, 505) 3 06600100 1 Key-Woodruff .19 x .88 x .38 4 02437500 1 Worm Shaft-1.00 Diameter (506)
02406200 1 Worm Shaft-1.00 Diameter (117, 300, 508, 505) 5 06601300 1 Key-Square .19 x 1.00 x .19 6 02401500 1 Adjustment Plug 7 05606100 1 Seal 1.00 x 1.31 x .15 8 05404400 2 Bearing-Cup 1.78 x .48 9 05404500 2 Bearing-Cone .75 x .61
10 00200500 2 Bearing Spacer 1.12 x 1.52 x .5 11 52400900 1 Worm and Gear Service Assembly 12 05707500 1 Ring-Retaining-Internal 1.78 x .062 13 05607000 2 Seal 1.63 x 2.13 x .25 14 00113800 1 Pipe Plug 15 00403700 1 Dust Cap 16 05947000 1 Bolt-Hex .31-18 x .75 Grade 5 17 06307400 1 Washer-Lock .31 x .10 18 06437500 1 Washer-Flat-Steel .33 x 1.00 x .09 19 06600800 2 Key-Woodruff .25 x .88 x .38 20 02472100 1 Rake Shaft 24" 1.00 Diameter (117, 300)
02459600 1 Rake Shaft 28" 1.00 Diameter (508)
02406500 1 Rake Shaft 32" 1.00 Diameter (505)
03519500 1 Rake Shaft 36" 1.00 Diameter (506)
21 05803000 2 Pin-Roll .19 x 1.50 22 05946800 4 Bolt-Hex .25-20 x .75 Grade 5 23 06306800 4 Washer-Lock-External .26 x .50 x .026 24 02401300 1 Gear Case Cover 25 00200800 1 Gasket 26 05505900 2 Bushing-Flange 1.63 x 1.87 x 1.68 x 2.25 27 06408700 2 Washer-Flat-Steel 1.63 x 2.50 x .01 28 02406400 1 Gear Case Shaft 29 02400200 1 Gear Case- Cast Iron 30 52408000 AR Gear Case- Cast Iron (117, 300, 505, 508)
52403500 AR Gear Case, 32"- Cast Iron (506)
31 00008000 1 Ariens 16 oz. Bottle of L2 Lube (5 oz. capacity)
Model 924117, 300, 505, 506, 508
23
Page 24
Model 924116, 117, 300, 508

DISCHARGE CHUTE CRANK

38
39
35
24
1
2
23
924117, 300, 508
36
22
21
34
28
16
30
3
29
12
32
6
31
17
4
14
4
11
15
8
6
13
5
10
7
9
43
37
25
26
27
41
42
924116
33
28
34
40
18
19
20
16
PS0604
24
Page 25

DISCHARGE CHUTE CRANK

Item Part No. Qty. Description
1 01019800 1 Cap, .38 Rod 2 07508300 1 Knob 3 02490700 1 Crank, Chute 4 07412000 4 Screw .25-20 x .50 Hex Washer Head Self Tapping 5 03223000 1 Cover, Gear 6 06714500 3 Pin-Spring Clip 7 03222900 1 Gear, Chute 8 06224400 1 Bolt-Round Head Square Neck .38-16 x 2.50 Grade 5 9 53204400 1 Pinion Gear w/Bracket (Contains Items 10-12)
10 06436100 1 Washer-Flat-Steel .63 x 1.01 x .062 11 03220551 1 Bracket, Gear 12 03224300 1 Push Nut 13 03220751 1 Gear Strap 14 06439300 1 Washer-Flat-Steel .38 x 1.50 x .062 15 01123800 2 Friction Washer 16 02480351 1 Bracket, Chute Support 17 03219000 1 Friction Plate 18 08320900 1 Spring-Compression .19 x .56 x 1.62 19 06436200 1 Washer-Flat-Steel .41 x .81 x .065 20 06529600 1 Nut-Locking-Center .38-16 21 02492451 1 Bracket, Chute Crank Support 22 05947900 2 Bolt-Hex .25-20 x .50 Grade 5 23 06437300 2 Washer-Flat-Steel .281 x .62 x .065 24 06529700 2 Nut-Locking-Center .25-20 25 05947500 2 Bolt-Hex .31-18 x 1.25 Grade 5 (116) 26 06307400 2 Washer-Locking .31 x .08 Regular (116) 27 06437200 2 Washer-Flat-Steel .34 x .69 x .065 (116) 28 06435800 2 Washer-Flat-Steel .31 x .73 x .065 29 02479700 1 Pin, Connector 30 02470400 1 Universal Joint 31 06308400 1 Washer-Locking .25 x .062 32 06533200 1 Nut-Hex .25-20 33 06215700 2 Bolt-Round Head Square Neck .31-18 x .75 34 06529800 2 Nut-Locking-Center .31-18 35 06437300 4 Washer-Flat-Steel .28 x .62 x .065 (117, 300, 508) 36 02480751 1 Bracket, Engine (117, 300, 508) 37 02480900 4 Spacer, Tube (117, 300, 508) 38 05946800 4 Bolt-Hex .25-20 x .75 Grade 5 (117, 300, 508) 39 06308400 4 Washer-Locking .25 x .06 x .065 (117, 300, 508) 40 05947000 2 Bolt-Hex .31-18 x .75 Grade 5 (116) 41 03233600 2 Spacer, Tube (116) 42 02480251 1 Bracket, Engine (116) 43 06219900 1 Bolt-Round Head Square Neck .25-20 x .75 Grade 5
Model 924116, 117, 300, 508
25
Page 26
Model 924505, 506

ELECTRIC DISCHARGE CHUTE

2
1
4
3
5
8
6
10
11
9
7
3
13
12
26
PS0860
Page 27

ELECTRIC DISCHARGE CHUTE

Item Part No. Qty. Description
1 02486959 2 Ring, Cover 2 06530100 6 Nut-Locking-Flange .25-20 3 07411900 3 Screw-Tapping 12-24 x .50 Hex Washer Head 4 02487100 1 Cover, Motor 5 05947400 1 Bolt-Hex .25-20 x 1.25 Grade 5 6 02488251 1 Bracket, Electric Motor 7 52416500 1 Motor, Electric Right Hand- Chute 8 06437300 1 Washer-Flat-Steel .28 x .62 x .065 9 02487000 3 Clamp, Chute
10 02486800 1 Gear, Chute 11 07414400 2 Screw-Tapping .31-18 x.75 Hex Washer Head 12 06529700 1 Nut-Locking-Center .25-20 13 02485159 1 Housing, Blower-32" E
Model 924505, 506
27
Page 28
Model 924507

BRUSH HEAD

20
33
23
24
32
23
37
3
27
20
31
36
20
16
15
19
23
18
30
26
25
11
4
23
19
13
28
6
7
23
9
1
24
8
14
12
14
10
12
23
34
2
23
25
23
35
7
12
10
5
21
22
29
17
28
8
PS0592
Page 29

BRUSH HEAD

Item Part No. Qty. Description
1 01061300 1 Chain Tightener 2 01060900 1 Sprocket 3 02468300 1 Chain, Assembly #40 x 106 4 05946800 2 Bolt-Hex .25-20 x .75 Grade 5 5 05946900 4 Bolt-Hex .31-18 x 1.00 Grade 5 6 05963700 2 Bolt-Hex .31-18 x 2.25 Grade 5 7 05957900 2 Bolt-Hex .38-16 x 1.50 Grade 5 8 05947000 16 Bolt-Hex .31-18 x .75 Grade 5 9 06437300 2 Washer-Flat-Steel .28 x .62 x .065
10 06435800 8 Washer-Flat-Steel .31 x .73 x .065 11 06308400 2 Washer-Lock .25 x .062 Regular 12 06308600 20 Washer-Lock .31 x .078 Regular 13 06533200 2 Nut-Hex .25-20 14 06529200 20 Nut-Hex .31-18 15 02468400 1 Pin, Spring Lok .19 x 1.25 16 02468500 2 Nut, Lok Stamped .31-18 17 07109400 2 Wheel, 5 inch Diameter 18 02468600 1 Spring, Tension .50 x 3.00 19 06529600 2 Nut-Locking-Center .38-16 20 02468700 5 Screw, Gear 10.9 M6 x 1-20 21 02468800 2 Lanyard .06 Cable 1.25 x 6 22 00547800 2 Pin, Hitch .38 x 2 23 02411300 8 Flange, Spherical 2 inch 24 05423400 2 Bearing 1.00 Bore, Spherical 25 05409700 2 Bearing-Ball .84 Hex x 52 MM x 1.07 26 01062900 1 Retainer Plate 27 02469000 1 Weldment, Core 28 02469100 1 Arm, Idler 29 02469200 2 Weldment, Caster Leg 30 02469300 1 Bushing .62 x 12 Gauge x .75 31 02469400 1 Shield, Chain 32 02469500 1 Shield Chain Top 33 02469600 1 Weldment, Head 34 02469700 1 Shield, Input 35 02469800 1 Weldment, Broom Frame 36 02469900 1 Shaft, Hex 20.5 with Hole 37 02470000 1 Set, 24 Section
Model 924507
29
Page 30
Model 924507
6
7

BRUSH DRIVE UNIT

1
2
21
3
4
21
23
8
25
26
27
34
35
32
36
9
32
5
30
31
33
28
2
10
20
10
1
19
14
4
2
3
10
16
24
22
12
46
15
29
17
11
13
15
18
14
43
44
41
42
40
37
38
39
41
45
PS0581
30
Page 31

BRUSH DRIVE UNIT

Item Part No. Qty. Description
1 05947500 4 Bolt-Hex .31-18 x 1.25 Grade 5 2 02404800 4 Retainer 3 06307200 4 Washer-Locking-Internal .313 x .030 4 02404900 2 Pivot, Center 5 02471751 1 Plate, Top Mount 6 02470900 1 T-Lock Handle 7 00597000 1 Washer-Cupped Serrated .38 8 02470151 1 Guard, Shaft 9 02405051 1 Frame, Adapter
10 06529800 4 Nut-Locking-Top .31-18 11 06215700 4 Bolt-Round Head Square Neck .31-18 x .75 Grade 5 12 02471851 1 Plate, Bottom Mount 13 06418500 2 Washer-Flat-Steel 1.02 x 1.50 x .125 14 05409700 2 Bearing, Ball 15 02429600 4 Flange, Bearing 16 02447600 1 Spacer 1.01 x 1.31 x .50 17 06436800 1 Washer-Flat-Steel .39 x .88 x .18 18 02429100 1 Shaft 19 02495500 1 Joint, Universal 20 05803000 1 Pin-Roll .19 x 1.50 21 05961100 3 Bolt-Hex .38-16 x 3.25 Grade 5 22 01062000 1 Sprocket 23 06436200 1 Washer-Flat-Steel .41 x .81 x .065 24 06529600 3 Nut-Locking-Center .38-16 25 02429451 1 Plate, Mounting 26 07028500 2 Bolt, Hex Flanged Whizloc Head .38-16 x .75 27 07002600 2 Nut-Retainer .38-16 28 05959400 4 Bolt-Hex .38-16 x .75 Grade 5 29 05805600 1 Pin-Roll .19 x 1.75 30 06529600 4 Nut-Locking-Center .38-16 31 02400400 1 Gear Box Assembly 32 06600300 2 Key-Woodruff .19 x .75 x .31 SAE 9 33 05958000 2 Bolt-Hex .38-16 x 1.25 Grade 5 34 02429800 1 Sprocket 35 06001100 2 Screw-Set .25-20 x .25 Socket Head Cup Point 36 01207800 1 Chain 37 02429551 1 Plate, Stiffener 38 06308800 2 Washer-Lock .38 x .094 39 06529400 2 Nut-Hex .38-16 40 50202100 1 Hub Assembly 41 06005500 2 Screw-Set .31-18 x .38 Socket Head Cup Point 42 07005300 3 Bolt-Serrated Round Head Slotted .31-18 x .75 43 06530400 3 Nut-Locking-Flanged .31-18 44 07307000 1 Pulley-V 9.00 x 1.25 45 07210800 1 V-Belt 46 06435700 4 Washer-Flat-Steel .38 x .88 x .083
Model 924507
31
Page 32

ELECTRICAL

Model 924116, 117, 300, 505, 506, 507, 508
13
8
9
10
14
8
9
11
14
7
1
3
2
4
5
12
13
6
tem Part No. Qty. Description
1 02460700 1 Key- with Cap (300, 505, 506, 508) 2 07517700 1 Cap- Ignition Switch (300, 505, 506, 508) 3 06517300 1 Nut-Panel .63-32 (300, 505, 506, 508) 4 02739600 1 Ignition Switch Assembly (300, 505, 506, 508) 5 52709300 1 Switch Assembly (Includes Items 1 thru 4) (300, 505, 506, 508) 6 02494400 1 Harness, Wiring-Light and Hand Warmer (116, 117, 507)
02494300 1 Harness, Wiring-Light and Hand Warmer 12V (300, 508)
02494200 1 Harness, Wiring-Light and Hand Warmer Chute (505, 506) 7 07517300 3 Cable Tie (300, 505, 506, 508)
07517300 1 Cable Tie (116, 117, 507) 8 06403800 2 Washer-Flat-Steel .51 x .88 x .024 (505, 506)
06403800 1 Washer-Flat-Steel .51 x .88 x .024 (116, 117, 300, 507, 508) 9 06310900 2 Washer-Locking-Internal .56 x .04 (505, 506)
06310900 1 Washer-Locking-Internal .56 x .04 (116, 117, 300, 507, 508)
10 02485700 1 Switch, On/Off Hand Warmer 11 02485600 1 Switch, Chute Rotation (505, 506) 12 00524700 1 15 AMP Fuse 13 07532900 2 Hand Warmer with Terminal (Recommend Fast Drying Epoxy for Installation) 14 09207600 AR Boot, Switch (Optional)
PS0891
32
Page 33

CONTINUITY DIAGRAM

Model 924300, 505, 506, 508
The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Key Switch
(02739600)
S
G
R
B
A
M
OFF START
G
R
M
S
B
A
RUN
Solenoid (Top View)
(03679000)
NOT ENERGIZED ENERGIZED
Hand Warmer Switch
(02485700)
S
G
R
B
A
M
HAND WARMER
OFF
HAND WARMER
ON
Chute Motor Switch (Models 505, 506)
(02485600)
LEVER LEFT
CHUTE LEFT
LEVER RIGHT CHUTE RIGHT
33
PS0841
Page 34
Model 924116, 117, 507

CONTINUITY AND WIRING DIAGRAMS

HEAD LIGHT
1
1
2
ENGINE
A.C. LIGHTING
YELLOW
D.C. CHARGE
RED
3
YELLOW
BLACK
YELLO
W
HAND WARMER
SWITCH
BROWN/ORANGE
4
BLACK
1 1
2 2
1 1
BROWN/ORANGE
2 2
HAND
WARMERS
Item Part No. Qty. Description
1 02485000 1 Headlamp, Oval with 1156 Bulb 2 07532900 2 Warmer, Hand - with Terminal (Recommend Fast Drying Epoxy for Installation) 3 02488800 1 Wire Harness-Hand Warmers and Light 4 02485700 1 Switch, On/Off Hand Warmer
The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
2
RIGHT
LEFT
PS0830
Hand Warmer Switch
(02485700)
HAND WARMER
OFF
HAND WARMER
ON
PS0820
34
Page 35

WIRING DIAGRAM

HEAD LIGHT
1
1
2
Model 924300, 508
A.C. LIGHTING
ENGINE
STARTER
D.C. CHARGE
RED
RED
4
COIL 2 COIL 1
STARTER
SOLENOID
YELLOW
RED
MAGNETO
RED
BATTERY
PURPLE
WHITE / BLACK
3
BLACK
B
A
FUSE
15 AMP
BROWN
YELLOW
7
RED
BLACK
BLACK
YELLOW
M
G
B
KEY
SWITCH
HAND WARMER
SWITCH
BROWN/ORANGE
5
A
R
A
S
6
8
1 1
2 2
1 1
BROWN/ORANGE
2 2
BLACK
2
WARMERS
RIGHT
HAND
LEFT
2
BLACK
Item Part No. Qty. Description
1 02485000 AR Headlamp, Oval with 1156 Bulb 2 07532900 2 Warmer, Hand - with Terminal (Recommend Fast Drying Epoxy for Installation) 3 AR Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L 4 03679000 1 Solenoid 5 02494300 1 Wire Harness 12 Volt 6 52709300 1 Switch Assembly 7 00524700 1 15 AMP Fuse 8 02485700 1 Switch, On/Off Hand Warmer
35
PS0672
Page 36

WIRING DIAGRAM

HEAD LIGHT
Model 924505, 506
A.C. LIGHTING
ENGINE
STARTER
RED
RED
4
COIL 2 COIL 1
YELLOW
D.C. CHARGE
RED
MAGNETO
BATTERY
RED
WHITE / BLACK
BLACK
B
FUSE
15 AMP
BROWN
3
A
PURPLE
BLACK
RED
7
YELLOW
1
BLACK
M
G
B
KEY
SWITCH
2
YELLOW
S
1
HAND WARMER
SWITCH
5
A
R
A
6
BROWN/ORANGE
CHUTE MOTOR
SWITCH
PURPLE
2
5
BLACK
8
BLACK
1
4
3
6
1 1
2 2
1 1
BROWN/ORANGE
2 2
HAND
WARMERS
9
BLACK/VIOLET
VIOLET
2
RIGHT
LEFT
2
CHUTE MOTOR
A
B
10
STARTER
SOLENOID
BLACK
Item Part No. Qty. Description
1 02485000 AR Headlamp, Oval with 1156 Bulb 2 07532900 2 Warmer, Hand - with Terminal Recommend Fast Drying Epoxy for Installation 3 AR Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L 4 03679000 1 Solenoid 5 02488700 1 Wire Harness 12 Volt 6 52709300 1 Switch Assembly 7 00524700 1 15 AMP Fuse 8 02485700 1 Switch, Hand Warmer 9 02485600 1 Switch, Chute Motor
10 52416500 1 Motor, Electric Right Hand- Chute
36
PS0850
Page 37
Ariens Company
655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.ariens.com
Loading...