Ariens 911086 - LM21, 911087 - LM21S User Manual
Walk Behind Lawn Mower
H
S
L
Owner/Operator Manual
Models
911086 - LM21
911087 - LM21S
ENGLIS
FRANÇAI
ESPAÑO
Transfer
model &
serial number
label from
product
registration
here.
Coller l’autocollant du
modèle et du numéro de
série dans cet encadré.
Transferir aquí la etiqueta
del modelo y número de
serie del registro del
producto.
01198200A 2/04
Supersedes 01198200
Printed in USA
11
10
2
12
ENGLISH
1. Engine Control
2. Speed Control Rod (Selfpropelled)
3. Primer
4. Side Discharge Cover
5. Side Discharge Deflector
6. Cutting Height Levers
(2 Rear Wheel Adjusters,
2 Front Wheel Adjusters)
7. Rear Door
8. Adjustable and Folding
Handlebars
9. Grass Bag
10. Recoil Starter Handle
11. Wheel Drive Control
(Self-Propelled)
12. Mulchmaster™ Plug
13. Handlebar Adjustment
Holes
8
13
6
5
CONTROLS AND FEATURES
13. Trous de réglage du
1
9
7
4
3
Figure 1
FRANÇAIS
1. Commande moteur
2. Tige de command de
vitesse (auto-tracté)
3. Poire d’amorçage
4. Plaque d’évacuation
latérale
5. Déflecteur latéral
d’évacuation
6. Leviers de hauteur de
coupe (réglage par
les roues)
7. Trappe arrière
8. Guidon réglable et pliable
9. Sac à herbe
10. Poignée du démarreur
manuel
11. Commande de
l’entraînement des roues
(tondeuses autotractées)
12. Déflecteur à paillis
Mulchmaster™
6
OM1410
ESPAÑOL
1. Control del motor
2. Varilla de control de
3. Cebador
4. Cubierta de la descarga
5. Deflector de la descarga
6. Palancas de la altura de
7. Puerta trasera
8. Manillares ajustables y
9. Bolsa de recolección del
10. Manilla de arranque de
11. Control de la transmisión
12. Tapón Mulchmaster™
13. Agujeros para el ajuste
guidon
velocidad
lateral
lateral
corte (ajustadores de la
rueda)
plegables
césped
retroceso
de la rueda
(autopropulsión)
del manillar
3
TABLE OF CONTENTS
Controls and Features . . . . . . . . . . . . . 3
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . . . . . . 9
Operation. . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance . . . . . . . . . . . . . . . . . . . . 13
Service and Adjustment s. . . . . . . . . . 15
INTRODUCTION
Storage. . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . 19
Service Par ts . . . . . . . . . . . . . . . . . . . . 20
Accessories. . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . 21
Warranty. . . . . . . . . . . . . . . . . . . . . . . . 22
THE MANUAL
Before using the unit, carefully and completely
read your manuals. The contents will give you
an understanding of safety instructions and
controls during normal operation and
maintenance.
All reference to left, right, front, or rear are
given from the operator’s position, facing the
direction of forward travel.
SERVICE AND REPLACEMENT
PARTS
When ordering replacement parts or making
service inquiries, know the Model and Serial
numbers of your unit and engine.
Numbers are located on the product
registration form in the unit literature package.
They are also printed on a serial number label,
located on the frame of your unit (Figure 2).
Serial Number
Label
Figure 2
• Record Unit Model and Serial numbers here
• Record Engine Model & Serial numbers here
OM1210
PRODUCT REGISTRATION
The Ariens dealer must register the product at
the time of purchase. Registering the product
will help the company process warranty claims
or contact you with the latest service
information. All claims meeting requirements
during the limited warranty period will be
honored, whether or not the product
registration card is returned. Keep a proof of
purchase if you do not register your unit.
Customer Note: If the Dealer does not
register your product, please fill out, sign and
return the product registration card to Ariens
or go to www.ariens.com on the internet.
UNAUTHORIZED REPLACEMENT
PARTS
Use only Ariens replacement parts. Replacing
any part on this vehicle with anything other
than an Ariens authorized replacement part
may adversely affect the performance,
durability, or safety of this unit and may void
the warranty. Ariens disclaims liability for any
claims or damages, whether warranty,
property damage, personal injury or death
arising out of the use of unauthorized
replacement parts. To locate your nearest
Ariens Dealer, call 1-800-678-5443 or go to
www.ariens.com on the internet.
DEALER DELIVERY
Dealer should:
1. Check that all assembly and adjustments
have been properly completed.
2. Fill out Original Purchaser Registration
Card and return the card to Ariens.
3. Explain Ariens Limited Warranty Policy.
4. Explain recommended lubrication and
maintenance. Advise customer on
adjustments. Remind customer to
change oil in 4 cycle engine crankcase
after first two (2) hours of operation.
GB - 4
5. Instruct customer on controls and
operation of unit. Discuss and emphasize
the Safety Rules. Give customer
Owner/Operator, Parts, and Engine
manuals. Advise customer to thoroughly
read and understand them.
DISCLAIMER
Ariens reserves the right to discontinue, make
changes to, and add improvements upon its
products at any time without public notice or
obligation.The descriptions and specifications
contained in this manual were in effect at
printing. Equipment described within this
manual may be optional. Some illustrations
may not apply to your unit.
SAFETY
WARNING: This cutting machine
is capable of amputating hands
and feet and throwing objects.
Failure to observe the safety
instructions in the manuals and
on decals could result in serious
injury or death.
Slopes are a major factor related
to slip and fall accidents.
Operation on all slopes requires
extra caution.
Tragic accidents can occur if the
operator is not alert to the
presence of children. Never
assume that children will remain
where you last saw them.
Gasoline is extremely flammable
and the vapors are explosive,
handle with care.
Stop unit and engine and allow
moving parts to stop before
leaving operator’s position.
SAFETY ALERTS
Look for these symbols to point out
important safety precautions. They
mean:
Attention!
Personal Safety Is Involved!
Become Alert!
Obey The Message!
The safety alert symbols above and signal
words below are used on decals and in this
manual.
Read and understand all safety messages.
WARNING: POTENTIALLY
HAZARDOUS SITUATION! If not
avoided, COULD RESULT in death
or serious injury.
CAUTION: POTENTIALLY
HAZARDOUS SITUATION! If not
avoided, MAY RESULT in minor or
moderate injury. It may also be used
to alert against unsafe practices.
NOTATIONS
NOTE: General reference information for
proper operation and maintenance practices.
IMPORTANT: Specific procedures or
information required to prevent damage to unit
or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working
precautions, for the benefit of yourself and
others. Understand and follow all safety
messages. Be alert to unsafe conditions and
the possibility of minor, moderate, or serious
injury or death. Learn applicable rules and
laws in your area.
REQUIRED OPERATOR TRAINING
Original purchaser of this unit was instructed
by the seller on safe and proper operation. If
anyone other than the original purchaser will
use the unit, ALW A YS provide this manual and
any needed safety training before operation.
DANGER: IMMINENTLY
HAZARDOUS SITUATION! If not
avoided, WILL RESULT in death or
serious injury.
GB - 5
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged safety
decals. Refer to Figure 3 for safety decal
locations.
CAUTION
PRECAUCION
ATTENTION
08088300
Figure 3
Leer el manual del operador.
Mantenga la unidad alejada de los niños u otras personas
cuando esté en funcionamiento.
Nunca dirija la descarga hacia otras personas, a que los objetos
lanzados pueden provocar lesiones.
No poner en funcionamiento la máquina a menos que las
guardas estén en posición de funcionamiento o la embolsadora
entera esté conectada.
Mantenga artefactos de seguridad (defensas, protectores,
interruptores, etc.) en su lugar y trabajando.
Transversa pendientes, no subir ni bajar.
Mire hacia abajo y detras antes y durante retroceso.
07742400B
OM1420
1. DANGER
TO AVOID SERIOUS INJURY OR DEATH
Read the operator’s manual.
OL1801
Keep children and others away
from unit while operating.
OL4370
Never direct discharge toward
other people. Thrown objects can
cause injury.
OL0910
Do not operate mower unless
guards are in operating position or
entire bagger is attached.
OL4540
Keep safety devices (guards,
shields, switches, etc.) in place
and working.
OL3030
• Go across slopes, not up and down.
• Look down and behind before and
while moving backward.
2. DANGER
KEEP HANDS AND FEET AWAY
Do not operate mower unless guards are in
operating position or bagger is attached.
3. CAUTION!
• Bag is subject to wear and
deterioration.
• Check bag frequently, replace when
necessary.
• Use original bag to comply with safety
specifications.
GB - 6
SAFETY RULES
If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALW AYS provide this manual and any needed
safety training before operation.
Read, understand and follow all safety
practices in Owner/Operator Manual before
beginning assembly. Failure to follow
instructions could result in personal injury
and/or damage to unit.
ALWAYS disconnect wire from spark plug
before assembly. Unintentional engine st art up
can cause death or serious injury.
Complete a walk around inspection of unit and
work area to understand:
• work area
• your unit
• all safety decals.
Clear work area of stones, sticks, wire and
foreign objects which might be picked up and
thrown. Tall grass can hide obstacles.
Know the work area. Stay alert for holes,
rocks, rough terrain and hidden hazards.
Keep away from drop-offs, ditches, or
embankments that could cause operator to
lose footing or control of unit.
ALWAYS be aware of traffic when operating
along streets or curbs.
Keep work area clear of all persons, children
and pets.
Keep children out of the work area and under
the watchful care of a responsible adult.
ALWAYS operate unit when there is good
visibility and light.
DO NOT mow wet grass.
ALWAYS be sure of your footing. Keep a firm
hold on handlebar. Walk, NEVER run.
Engine/blade control feature on mower stops
engine and blade within 3 seconds whenever
operator releases handlebar. Check this
feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust or have
it repaired before using unit.
Only trained adults may operate unit. Training
includes actual operation.
NEVER operate after or during the use of
medication, drugs or alcohol. Unit requires
complete and unimpaired attention.
NEVER allow children to use mower.
ALWAYS keep hands and feet away from
rotating parts. Rotating parts can cut off body
parts.
ALWAYS keep hands away from pinch points.
Fumes from engine exhaust can cause death
or serious injury. DO NOT run engine in an
enclosed area.
ALWAYS protect eyes, face, and body with
adequate safety gear and protective clothes.
Wear sturdy footwear, gloves and safety
goggles or safety glasses with side shields
while operating mower.
NEVER operate mower barefoot or when
wearing open sandals or canvas shoes.
NEVER wear loose clothes, long hair or
jewelry that may get caught in rotating parts.
ALWAYS stand clear of discharge when
operating unit.
NEVER direct discharge toward bystanders.
Operator is responsible for bystander safety.
DO NOT touch hot parts. Allow parts to cool.
Keep safety devices or guards in place and
functioning properly. NEVER modify or
remove safety devices.
Read, understand, and follow all instructions
in the manual and on the machine before
starting.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an emergency.
DO NOT attempt to start your engine until you
know what the controls do and how they work.
DO NOT tilt mower when starting it.
Keep feet away when starting engine.
DO NOT start the engine or operate mower
without side discharge cover or side discharge
deflector installed.
Take all possible precautions when leaving
unit unattended.
ALW A YS shut off engine and disconnect spark
plug wire to prevent accidental starting or
unauthorized use.
Stop engine if anyone enters the work area.
NEVER attempt to make any adjustments to
unit while engine is running (except where
specifically recommended). Stop engine and
wait for all moving parts to stop before
servicing.
DO NOT make cutting height wheel
adjustments while the engine is running.
If you strike an object, or if equipment vibrates
abnormally, stop engine at once, wait for
moving parts to stop and disconnect wire from
spark plug. Repair any damage before
restarting unit.
Keep rear door closed when engine is running
unless the grass bag is in place.
GB - 7
Stop engine before removing and emptying
grass bag.
When mulching or bagging, ALWAYS install
discharge cover.
When side discharging, ALWAYS install side
discharge deflector.
ALWAYS shut off engine, allow blade to stop
and disconnect spark plug wire before clearing
clogs or cleaning unit.
Check grass bag for wear, damage, and/or
deterioration. Replace only with Ariens
original equipment replacement parts for
safety.
To reduce fire hazard and overheating, keep
equipment free of grass, leaves, debris or
excessive lubricants.
Use extra care when approaching blind
corners, shrubs, trees, or other objects which
may obscure vision.
DO NOT mow at too fast a rate. DO NOT
change engine governor setting or over-speed
the engine.
Do not operate mower on gravel or loose
material such as sand. Stop mower when
crossing drives, walks, or roads to prevent
damage or injury from thrown objects.
DO NOT pull mower backwards unless
absolutely necessary. Look down and back,
especially for small children, before and while
moving backwards.
On self-propelled models, releasing wheel
drive control must stop mower’s forward
movement. If this feature fails to operate,
disconnect spark plug wire and repair before
using unit.
On self-propelled models, wheel drive must be
disengaged when starting engine.
DO NOT operate on steep slopes.
NEVER leave unit unattended on a slope.
Chock wheels if parking on a slope.
Mow across the face of slopes, never up and
down. Be especially cautious when changing
direction on slopes.
This product is equipped with an internal
combustion engine. DO NOT use on or near
any unimproved, forest or brush covered land
unless the exhaust system is equipped with a
spark arrestor meeting applicable local, state
or federal laws. A spark arrestor, if used, must
be maintained in effective working order by the
operator. See your Ariens Dealer or engine
manufacturer’s service center.
Fuel is highly flammable and its vapors can
explode. ONLY use approved fuel containers.
• NO Smoking!
• NO Sparks!
• NO Flames!
• Allow engine to cool before filling fuel
tank.
Never fill containers inside a vehicle or on a
truck or trailer bed with a plastic liner. Always
place containers on the ground away from
your vehicle before filling.
When practical, remove gas-powered
equipment from the truck or trailer and refuel it
on the ground. If this is not possible, then
refuel such equipment on a trailer with a
portable container, rather than from a gasoline
dispenser nozzle.
Keep the nozzle in contact with the rim of the
fuel tank or container opening at all times until
fueling is complete. Do not use a nozzle lockopen device.
Check fuel supply before starting engine.
DO NOT fill gasoline tank indoors, when
engine is running, or while engine is hot.
Allow engine to cool several minutes before
removing fuel cap.
DO NOT overfill. Allow about 1/4" (6 mm) of
tank space for fuel expansion.
Replace gasoline tank cap securely and clean
any spilled fuel before starting engine.
If fuel is spilled on clothing, change clothing
immediately.
NEVER store fuel inside where there is an
open flame, such as a water heater.
ALWAYS drain fuel outdoors away from
ignition sources.
ALWAYS shut off engine when transporting
unit on a truck or trailer.
Avoid Electric Shock. DO NOT disconnect
wire from spark plug while engine is running.
Accidental engine start up can cause death or
serious injury. Except where specifically
recommended, ALWAYS stop engine, wait for
moving parts to stop, allow parts to cool and
disconnect spark plug wire before inspecting,
servicing, adjusting or repairing unit.
Keep mower free of grass, leaves, or other
debris build-up.
Keep equipment in good condition.
Maintain or replace safety and instruction
labels, as necessary.
Follow engine manufacturer’s safety
instruction when servicing engine.
Check all hardware at regular intervals,
especially blade attachment bolts. Keep all
hardware properly tightened.
Before tipping unit, remove fuel.
Ensure all wheel blocks, jack stands and tie
downs will support unit during maintenance.
GB - 8
Loading...