Page 1
Sno-Thro
Parts Manual
MODELS
001 - SS322
002 - SS522
003 - SS322E
004 - SS522E
006 - SS322
007 - SS522
008 - SS322E
009 - SS522E
301 - SS322
301*- SS322
302 - SS522
303 - SS522
03801500D Rev. 6/98
Supercedes 03801500,A,B,C
Printed in USA
Page 2
94ien&
The Manual
Before you operate your unit, carefully
u
instructions and controls during normal operation and
maintenance.
For your safety and the safety of others always read,
understand, and follow all ADANGER, AWARNING,
and ACAUTION messages found in manuals and on
safety decals.
and completely read manuals supplied
with the unit. The contents will provide
you with an understanding of safety
Service and
Replacement Parts
When ordering replacement parts or
making service inquiries, know the
Model and Serial numbers of your unit
and engine.
Numbers are located on the product registration card
in the unit literature package. They are printed on a
serial number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
Product Registration
A warranty registration card must be
filled out by the Ariens dealer, signed,
and returned at sale. This card
activates the warranty.
The replacement of any part on this unit with anything
other than an Ariens authorized replacement part may
adversely affect the performance, durability, or safety
of this unit and may void the warranty. Claims meeting
requirements during limited warranty period will be
honored. To guarantee full warranty service, make
sure your registration card has been returned to Ariens
Company.
Your Satisfaction Is Important____________________
Questions? Please follow these helpful steps:
1. Always Refer to Your Owner/Operator or
Engine Manual First.
a) Its detail will guide you through safe and
proper operation and maintenance.
b) It contains specifications on your unit.
c) If your questions are not answered in these
manuals, go to step number two.
Record Engine Model and Serial numbers here:
To Speed Parts Ordering Know These
1. Model and serial number of unit.
2. Part number.
3. Quantity required.
4. Description.
2. Contact Your Ariens Dealer.
a) Our dealers will be happy to supply any
service or advice required to keep your unit
operating at peak efficiency.
b) A factory trained staff is available to
support your equipment needs. They stock
genuine Ariens parts and lubricants
manufactured with the same precision and
skill as the original.
c) If your questions are not resolved by the
support staff, ask for the manager or owner.
d) When contacting your Ariens Dealer supply
your unit or attachment model and serial
numbers.
Page 3
Table Of Contents
Models
Model 938001 (SS322)
3 HP 22" Single Stage Sno-Thro
Serial No. 000101 and up
Model 938002 (SS522)
5 HP 22“ Single Stage Sno-Thro
Serial No. 000101 and up
Model 938003 (SS322e)
3 HP 22“ Single Stage Electric Start Sno-Thro
Serial No. 000101 and up
Model 938004 (SS522e)
5 HP 22“ Single Stage Electric Start Sno-Thro
Serial No. 000101 and up
Model 938006 (SS322)
3 HP 22“ Single Stage Sno-Thro
Serial No. 000101 and up
Model 938007 (SS522)
5 HP 22“ Single Stage Sno-Thro
Serial No. 000101 and up
Section 1: Decals
Decals
....................................................................
Section 2: Power Plant
____________________
_______________
Engine and Drive....................................................4
Section 3: Operator Controls
_________
Auger/Impeller........................................................6
Handlebars, Controls, and Shrouds.......................8
Anchor Cable Hardware
......................................
2
11
Model 938008 (SS322e)
3 HP 22“ Single Stage Electric Start Sno-Thro
Serial No. 000101 and up
Model 938009 (SS522e)
5 HP 22“ Single Stage Electric Start Sno-Thro
Serial No. 000101 and up
Model 938301 (SS322)
3 HP 22" Single Stage Sno-Thro
Serial No. 000101 - 000250
Model 938301* (SS322)
3 HP 22“ Single Stage Sno-Thro
Serial No. 000250 and up
Model 938302 (SS522)
5 HP 22" Single Stage Sno-Thro
Serial No. 000101 and up
Model 938303 (SS522)
5 HP 22" Single Stage Sno-Thro
Serial No. 000101 and up
NOTE: * Distinguishes Different Serial
Number Range
Reference Table
Hardware descriptions are given in decimals.
Decimals to Fractions
1/16
1/8
3/16
1/4 .250 3/4
5/16 .312 13/16
3/8 .375 7/8
7/16
1/2
.062 9/16
.125 5/8 .625
.187
.437
.500 1 1.00
11/16
15/16
.562
.687
.750
.812
.875
.937
Aliens. Sno-Thro 938 Rev. 6/98
® Copyright -1998 Aliens Company
Page 4
Decals
Models 938001,002,003,004,006,007,008,009,301,301 *,302,303
A
TO AVOID POSSIBLE INJURY READ
OWNERS MANUAL AND UNDERSTAND
PURPOSE OF ALL SAFETY ALERTS.
• ALLOW OPERATION ONLY BY PROPERLY
TRAINED ADULT NEVER CHILDERN.
• STOP ENGINE AND REMOVE lONRION KEY PRIOR TO
LEAVING OPERATORS POSmON FORANYREASON.
• KEEP ALL CONTROLS, GUARDS, AND SAFETY DEVICES
PROPERLY SERVICED AND
FUNCTIONAL
• NEVER DIRECT DISCHARGE TOWARDS PERSONS
OR PROPERTY THAT MAY BE INJURED OR
DAMAGED BY THROWN OBJECTS. 077^^
SAFETY
INSTRUCTIONS
A DANGER
ROTATING
PARTS
stop engine &
remove ignition
^ key before clearing
Item No.
1
2
3
4
Part No.
Qty.
63800200
07769100 1
07769200 1
07718600
ADANGER
Keep clear of auger while
Annina ic riinninn
engine is running.
Description
1 Decal Set-38,000 Series CE (301,301 *,302,303)
Decal-Danger (001,002,003,004,006,007,008,009)
Decal-Panel Rotating Parts (001,002,003,004,006,007,008,009)
1 Decal-Safety Instruction (001,002,003,004,006,007,008,009)
PS0012
Aliens* Sno-Thro 938 Rev. 6/98
Page 5
Decals
Models 938001,002,003,004,006,007,008,009,301,301 *,302,303
lENS
H o r s e p o w e r
Item No.
1
2
3
4
5
Aliens* Sno-Thro 938 Rev. 6/98
Part No. Qty.
07718200
07728800 1
07718400
07718300 1
07718800
07718700
07843500
63801900
63801800
07718500
1 Decal-Panel
Decal-Ariens (006,007,008,009,301 *,303)
Decal-SS522 (002,302)
1
Decal-SS322 (001,301)
1 Decal-SS322e (003)
1 Decal-SS522e (004)
1
1
1
1
Decal-Auger/Impeller Bail
Decal Set-5HP Electric (007,009,303)
Contains Items 5 and 6, Item 6 used only on (009)
Decal Set-3HP Electric (006,008,301*)
Contains Items 5 and 6, Item 6 used only on (008)
Decal-Ariens (001,002,003,004,301,302)
PS0022
Description
Page 6
Engine and Drive
Models 938001,002,003,004,006,007,008,009,301,301 *,302,303
PS0031
Aliens. Sno-Thro 938 Rev. 6/98
Page 7
Engine and Drive
Models 938001.002,003,004,006,007.008.009.301,301 *,302,303
Item No. Part No.
1
2 03800400
3
4
5
6
7
8
9
10
11 03807500
12 03801100
13 06409000
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
07525300 1 Cap-Fuel
03807800
04003500 1 Tie Wrap-15.25" X 120 lbs (002,004,302)
02917200 2 Hose Clamp
03328000
03807900
06527600 6
03803300
06204200 4
03802600
03801200
06303600 6
05905300
08331600
07228500 1
07228600
07232100
07232200
06200100
07321900
06426600
03801000
06606100
05902200 2
03805500 2
05900300 2
06114400
06403800
05513400
03803400
03803500
07029600 2
07029500 3
08243800 1
08243900
06504200
03801600
06114600
06406800
06531300
Qty. Description
1
Tank-Fuel
1 Tape Foam-Neoprene 6.0"
1 Gas Line Hose (001,003,006,008,301,301*)
1 Gas Line 1/4" I.D. x 9.5 (002,004,007,009,302,303)
Nut-Locking-Center-Flange .250-20
1 Line-Primer
Bolt-Round Head Square Neck .25-20 x .75
1 Bracket-Fuel Tank Mounting
1 Arm-Idler
2
2
4 Washer-Flat-Steel .328 x .875 x .062
2 Bolt-Hex .31-24 X.75
1 Spring-Tension .043 x .44 x 3.31
1
1 V-Belt 3L-Sectlon 33.00 x .38 (006,008,301*)
1
1 Bolt-Round Head Square Neck .25-20 x 1.25
1
1
1 Pulley-Impeller Shaft 3L x 6.0 Diameter
1 Key-Square .188 x .75 x .188
Pulley-Drive 3L x 1.52 Diameter (001,003,006,008,301,301*)
Pulley-Drive 3L x 1.80 Diameter (002,004,007,009,302,303)
Washer-Lock .313 x .078
V-Belt 3L-Section 33.00 x .38 (001,003,301)
V-Belt 3L-Section 33.45 x .38 (002,004,302)
V-Belt 3L-Section 33.49 x .38 (007,009,303)
Idler-Flat 1.75 X.27
Washer-Flat-Steel .281 x 1.000 x .063
Bolt-Hex .31-18 X .75 (001,003,006,008,301,301*)
3
1
1
1
2
1 Bushing-Flange .265 x .437 x .250 x .750
1
1
1
2
1
2
Bolt-Hex .31-18 X .75 (002,004,007,009,302,303)
Finger-Belt (001,003,006,009,301,301 *)
Finger-Belt (002,004,007,009,302,303)
Bolt-Hex .31-18 X 1.00 (001,003,006,008,301,301*)
Bolt-Hex .31-18 X 1.00 (002,004,007,009,302,303)
Screw-Machine .25-20 x .75
Washer-Flat-Steel .505 x .875 x .024
Motor-Starting Tec #1133-106 (003,008)
Motor-Starting Tec #1A173-111 (004,009)
Screw-Hex Flange Washer Head-TX .25-20 x .868 (003,008)
Screw-Hex Flange Washer-Head-TX-Sems .25-20 x .49 (004,009)
Engine-Tec 3 HP 2 Cycle (001,003,006,008,301,301*)
Engine-Tec 5 HP 2 Cycle (002,004,007,009,302,303)
Nut-Locking .312-18
Bracket-Engine Mounting
Screw-Machine 8-32 x 2.75 (003,004,008,009)
2
Washer-Flat-Steel .194 x .492 x .047 (003,004,008,009)
2
Nut-Locking 8-32 (003,004,008,009)
Anens» Sno-Thro 938 Rev. 6/98
Page 8
Auger/Impeller
Models 938001,002,003,004,006,007,008,009,301,301 *,302,303
PS0061
Ariens. Sno-Thro 938 Rev. 6/98
Page 9
Auger/Impeller
Models 938001,002,003,004,006,007,008,009,301,301 *,302,303
Item No.
1
2
3
Part No.
08329900 1
53800400 1 Deflector-Discharge Chute Assembly
06527600
Qty. Description
Spring-Tension (002,004,302)
23 Nut-Locking-Center-Flange .250-20 (001,003,301)
4 06437800 2 Washer-Flat-Rubber .31 x 1.25 x .06
5 03801900
6
06204200 8 Bolt-Round Head Square Neck .25-20 x .75
7 03805600
03801800 1
8
07409500 4
9 05514500
10
11
12
13
08329800
05429800 1 Ball .375 (001,003,006,008,301,301 *,303)
03801700
53800800
03807100
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
03803200 1 Deflector-Exhaust (001,003,006,008,301,301 *)
03808000 1
07401500 6 Screw-Tapping .250-20 x .37
03804000 1 Gear-Discharge Chute Segment
03804100 1 Pinion-Discharge Chute 18T (002,004,007,009,302)
06114300 5 Screw-Machine .25-20 x .50
03800800 2 Cup-Bearing
05418800 2 Bearing Ball .699 x 1.575 x .47
06203700
03800300
03802300
06404300 4 Washer-Flat-Steel .406 x .812 x .065
07139400
05717400
03802400
03802500
53800800 1 Support-Bearing (001,002,003,004,301,302)
1
Chute-Discharge
1
Handle (002,004,302)
Handle (001,003,006,007,008,009,301,301 *,303)
Screw-Tapping 8-18 x 1.50
1
Bushing-Flange .325 x .444 x .440 x .560 (002,004,007,009,302)
1
Spring-Compression .045 x .360 x 2.75 (001,003,006,008,301,301 *,303)
1
Bracket-Discharge Chute Rotation
1
Support-Bearing (001,002,003,004,301,302)
1
Support-Bearing-Left Hand (006,007,008,009,301 *,303)
Tape-Adhesive Backed Foam 11.0
1
Bolt-Round Head Square Neck .25-20 x 1.00
1
Chassis
1
Axle
2
Tire/Wheel Assembly 7.0 x 1.5
2 Ring-Retaining-External .375 x .035
2
Cap-Hub
1 Scraper
03807200 1 Support-Bearing-Right Hand (006,007,008,009,301 *,303)
31
32
33
34
35
36
37
38
39
40
53800300 1 Housing-Impeller Assembly
05706100
03803000 6
1 Ring-Retaining-External .672 x .035
Plate-Bolt-Self-Tapping
03807000 2 Impeller Half
53800700
03806900
06426600
1 (A) Kit-Impeller Replacement (001,002,003,004,301,302)
1 (B) Shaft-Impeller-See Note (006,007,008,009,301 *,303)
12
Washer-Flat-Steel .281 x 1.000 x .063
07412400 12 Screw-Tapping .250-20 x 1.00
06114400 10
05809200 6
03806200
03807400
Screw-Machine .25-20 x .75
(B) Pin-Roll .250 X 1.75 - See Note (006,007,008,009,301 *,303)
1 Arm-Spring (001,002,003,004,301,302)
Bracket-Spring (006,007,008,009,301 *,303)
1
Ariens» Sno-Thro 938 Rev. S/98
"A" or "B' in front of the description in the description column has the
following meaning: A=Before serial numbers as follows and B=After
serial numbers as follows:
938001 = 002777 938003 = 000899 938301 = 000250
938002 = 001956 938004 = 000801 938302 = 000250
Page 10
Handlebars, Controls, and Shrouds
Models 938001,002,003,004,006,007,008,009,301,301 ^302,303
PS0052
Ariens« Sno-Thro 938 Rev. 6/98
Page 11
Handlebars, Controls, and Shrouds
Models 938001,002,003,004,006,007.008,009,301,301 *,302,303
Item No. Part No. Qty.
1
2 03806351 1
3 07524800 1
4 03804400 1
5 05514500 2
6 06412300 2
7
8 07525600 2
9
10 03804900 1
11
12 07404500 1
13 03804800 1
14
15
16
17 03804600 1
18 03804700 1
19 01123800 2
20 08320900 1
21 06409600
22 06512200
23 06929000
24 01157100 1
25 03802900 1
26 06206000 1
27
28 53800100 1
29 03803900 1 Spacer-Crank Transfer Pinion (002,004,007,009,302)
30 06701100
31 03804300 1 Pinion-Crank Transfer 48T (002,004,007,009,302)
32 03804200 1 Gear-Crank Transfer 12T (002,004,007,009,302)
33 03803600
34
35 06406800
36 06504200 2 Nut-Locking .312-18
37
38
39
40
41 03802700
42
07008200 2
03807351
05934100
06527600
03232200 1
06218000
06209400 1
03215500 1
06937300 1
07514500
03802800 1
05800200 2
06406200
08330600
03805300 2
03805400
06701000
07524500 2 Knob
06409000 4 Washer-Flat-Steel .328 x .875 x .062
06303600 2 Washer-Lock .313 x .078
03802100 1 Handle Bar-Lower
02460700 1 Key-w/Cap
6
Nut-Push .312 (001,002,003,004,301,302)
Engine Bail (001,002,003,004,301,302)
1
Bail-LCIutch Control (006,007,008,009,301*,303)
Extension Cord Tec #1A174-17 (003,004,008,009)
Handle Bar-Upper
Bushing-Flange .325 x .444 x .440 x .560
Washer-Flat-Steel .344 x .688 x .065
1
Bolt-Hex .25-20 X 1.38 (002,004,302)
Knob (002,004,302)
Nut-Locking-Center-Flange .250-20
Lever-Chute DefI Control (002,004,302)
Spacer .230 X .310 X .255 (002,004,302)
Screw-Tapping 12-24 x .50 (002,004,302)
Anchor-Cable-Chute DefI Control (002,004,302)
1
Bolt-Round Head Square Neck .38-16 x 2.25 (002,004,302)
Bolt-Round Head Square Neck .25-20 x 1.25 (002,004,302)
Friction Plate (002,004,302)
Housing-Inner-Chute DefI Control (002,004,302)
Housing-Outer-Chute DefI Control (002,004,302)
Friction Washer (002,004,302)
Spring-Compression .187 x .56 x 1.62 (002,004,302)
1
Washer-Flat-Steel .458 x .750 x .06 (002,004,302)
1
Nut-Locking Top .375-16 (002,004,302)
1
Control-Choke (001,003,006,008,301,301*)
Control-Choke 5 HP (002,004,007,009,303)
Recoil Start Handle
Bracket-Starter-Handle
Bolt-Round Head Square Neck .25-20 x 1.50
1
Knob (002,004,007,009,302)
Crank-Chute (002,004,007,009,302)
Support-Chute Crank (002,004,007,009,302)
Pin-Roll .125 X 1.38 (002,004,007,009,302)
2
Washer-Flat-Steel .754 x 1.125 x .062 (002,004,007,009,302)
2
Spring-Compression (002,004,007,009,302)
Sleeve-Spring Thrust (002,004,007,009,302)
2
Washer-Friction .53 x 1.00 x .094 (002,004,007,009,302)
1
Pin-Cotter .15 X 1.25 (002,004,007,009,302)
1
Shaft-Chute Crank Transfer (002,004,007,009,302)
1
Pin-Hair Internal .08 x .38 x 1.42 (002,004,007,009,302)
2
Washer-Flat-Steel .194 x .492 x .047
2
JBolt .31-18
Description
Ariens» Sno-Thro 938 Rev. 6/98
Page 12
Handlebars, Controls, and Shrouds (Continued)
Models 938001,002,003,004,00
Item No. Part No.
43 07517700
5,007,008,009,301,301 *,302,303
Qty.
1
Cap-Ignition Switch
44 06517300 1 Nut-Panel .625-32
45
46
47
48
49
50
51
07527800 1
02456500 1
Plug-Hole .50 Diameter (001,003,006,008,301,301*,303)
Key Switch Assembly
06216900 4 Bolt-Round Head Square Neck .25-20 x 1.75
03803800
06111200
1
2
Guide-Rope
Screw-Machine 10-24 x .750
07518200 1 Primer Assembly
06930500
1
Cable-Clutch Control (001,002,003,004,301,302)
06937100 1 Cable-Clutch Control (006,007,008,009,301 *,303)
52
53
07412300 2 Screw-Spec-Tapping #10 x 1.0 w/#12 Head
03805200
1
Sheet-Heat Reflective 3x5 (001,003,006,008,301,301*)
03805000 1 Sheet-Heat Refiective (002,004,007,009,302,303)
54 53801000
1
Cowl-Replacement (001,002,003,004,301,302)
53801100 1 Cowl-Assembly (006,007,008,009,301 *,303)
55
56
06930400
07517300 2 Cable Tie (001,003,006,008,301,301 *)
1 Cable-Chute Deflector Control (002,004,302)
07517300 3 Cable Tie (002,004,007,009,302,303)
07527400 1 Cable Tie (004,009)
57
58
59
03804500 1 Bracket-Angle, Deflector Control (002,004,302)
06506500 2 Nut-Locking 10-24
06113000
4 Machine Screw 10-24 x .50 (001,002,003,004,301,302)
07413300 8 Screw-Tapping 12-24 X .50 (006,007,008,009,301 *,303)
60
61
62
63
64
06400100
03806700 2
06506500
07403300 1
06909100 1 Cable Clamp Non Skid (002,004,302)
07517000 1 Cap (006,007,008,009,301 *,303)
4 Washer-Flat-Steel .25 x .562 x .049 (001,002,003,004,301,302)
Plate-Cowl Retainer (006,007,008,009,301 *,303)
4 Nut-Locking 10-24 (001,002,003,004,301,302)
Screw-Tapping 10-16 x .75 (002,004,302)
Description
10
Aliens« Sno-Thro 938 Rev. 6/98
Page 13
Anchor Cable Hardware
Models 938001,003,006,007,008,009,301,301 *,303
2 '^W
y’ \ \
'■> -V '
'•v
V
Item No. Part No. Qty.
1 06209400 2
2
3
Ariense Sno-Thro 938 Rev. 6/98
01137500
06527600 7
Bolt-Round Head Square Neck .25-20 x 1.25
1
Cable-Anchor
Nut-Locking-Center-Flange .250-20
Description
11
Page 14
c^rtens
655 West Ryan Street • P.O. Box 157 • Brillion, Wl 54110-0157 • 920-756-2141 • Fax 920-756-4421
Ask Your Dealer For Information On
These Other Fine Ariens Products
• Front and Rear Tine Tillers
• Walk-Behind Lawn Mowers
• Zero-Turning Radius Mowers
• Rear Engine Riding Mowers
• Yard and Garden Tractors
• Commercial Walk-Behind and Riding Mowers
• Sno-Thros
Loading...