Argos ZSVBS-NW-AR, ZSVBS-W-AR, ZSVBS-O-AR, ZSVBS-YE-AR ASSEMBLY INSTRUCTIONS
Assembly Instructions - Please keep for future reference
Issue 2 - 12/12/13
MADE IN
BRITAIN
If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928
or email: Help@ClickSpares.co.uk (quoting your original order number)
Important - Please read these instructions fully before starting assembly
Dimensions
Seville - Bedside
171/8140
145/0446
157/3622
170/9214
Width - 35.5cm
Depth - 33cm
Height - 41.5cm
160/9785
162/9325
162/7956
159/7732
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Warning: This unit weighs
approximately 7kgs.
Please lift with care.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Parts of the assembly will be
easier with 2 people.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor (use opened
out unit carton).
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Safety note: If there is any
chance of this unit being pulled
over by children etc. it is
recommended that the unit is
secured to a wall using suitable
fixings (not supplied).
• Dispose of all packaging
carefully and responsibly.
1
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
2
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components, call the
Customer Helpline: 0870 112 1928 or email:
Help@ClickSpares.co.uk (quoting your original order number
and the reference numbers below)
1
2 3
Top/Base (D2493A)
(321 x 327mm) x 2
Left Side (D2494A)
(412 x 328mm)
Right Side (D2495A)
(412 x 328mm)
Drawer Front (D2496A)
(317 x 157mm)
Left Drawer Side (W410LH)
(300 x 95mm)
Right Drawer Side (W410RH)
(300 x 95mm)
Drawer Back (W288-95)
(288 x 95mm)
Drawer Base (T299-297)
(299 x 297mm)
Back (X175-347)
(175 x 347mm)
4 5 6
7
8
9
3
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Ruler - Use this ruler to help correctly identify the screws
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
Components - Fittings
If you have damaged or missing components, call the
Customer Helpline: 0870 112 1928 or email:
Help@ClickSpares.co.uk (quoting your original order number
and the reference numbers below)
Tools required
Rule Scissors Hammer
Eye protection
(when using a
hammer or drill)
Cross-head
screwdriver
A
Wooden dowel (F22) x 4
B
Metal dowel (F901) x 2
C
D E F
G
Small locking
nut (F3) x 2
Nail (F51) x 540mm Screw (F910) x 8
Handle (F300) x 1
H
Knock-in Peg (F171WH) x 4
I
R (F601)
L (F600)
F599
F599
Drawer stops (F599) x 2
Runners (F600) x 1 and (F601) x 1
25mm Screw (F95) x 1
Loading...