Argos ZNS3D2-OW-AR, ZNS3D2-TB-AR, ZNS3D2-WB-AR, ZNS3D2-WPK-AR ASSEMBLY INSTRUCTIONS
MADE IN
BRITAIN
Dimensions
Width - 69cm
Depth - 40cm
Height - 55.5cm
New Sywell - 3 Drawer Chest
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 3 - 07/04/14
Important - Please read these instructions fully before starting assembly
282/1500
262/1614
281/3037
248/5393
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Warning: This unit weighs
approximately 19kgs.
Please lift with care.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Parts of the assembly will be
easier with 2 people.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor (use opened
out unit carton).
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Safety note: If there is any
chance of this unit being pulled
over by children etc. it is
recommended that the unit is
secured to a wall using suitable
fixings (not supplied).
• Dispose of all packaging
carefully and responsibly.
1
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Components - Panels
Please check you have all the panels listed below
2
1
If you have damaged or missing components, call the
Customer Helpline: 08456 400800 quoting the reference
numbers below
Top (D2546A)
(658 x 394mm)
Drawer Front (D2550A)
(654 x 162mm) x 3
Drawer Base (T636-327)
(636 x 367mm) x 3
Back (X684-524)
(684 x 524mm)
Left Side (D2547A)
(553 x 396mm)
2
Right Side (D2548A)
(553 x 396mm)
Rail (D2549A)
(658 x 78mm) x 2
Drawer Back (W625-124)
(625 x 124mm) x 3
3
4
9
5
6
10
7
8
Left Drawer Side (W370-124LH)
(370 x 124mm) x 3
Right Drawer Side (W370-124RH)
(370 x 124mm) x 3
6
Please check you have all the fittings listed below
Tools required
3
Components - Fittings
If you have damaged or missing components, call the
Customer Helpline: 08456 400800 quoting the reference
numbers below
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
A
Wooden dowel (F22) x 6
B
Metal dowel (F901) x 14
C
D E F
G H I
Rule Scissors Hammer
Eye protection
(when using a
hammer or drill)
Cross-head
screwdriver
Ruler - Use this ruler to help correctly identify the screws
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
J K
9mm Screw (F74) x 6 9mm Screw (F73) x 12
Drawer runner (F1004) x 6
Electric drill
(do not use for
fitting screws)
Knock-in Peg (F171) x 12
Small locking
nut (F3) x 6
Large locking
nut (F900) x 8
Nail (F51) x 16
Handle (F315) x 3
25mm Screw (F95) x 6
M
Plastic Nail (F91) x 4
L
Wedgefix (F639) x 12
Loading...