Argos ZNOT33MR-MW-AR, ZNOT33MR-WO-AR, ZNOT33MR-DLO-AR ASSEMBLY INSTRUCTIONS

MADE IN

BRITAIN

Dimensions

Normandy - Tall 3+3 Mirror Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 3 - 11/06/15

Important - Please read these instructions fully before starting assembly

355/6324

357/5563

338/3267

Width - 149.5cm

Depth - 50cm

Height - 199.5cm

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 108kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the bracket supplied.

• Dispose of all packaging carefully and responsibly.

Drawer Front (DF1859)

(494 x 162mm) x 3

Drawer Back (W436-124)

(436 x 124mm) x 3

Left Drawer Side (W370-124LH)

(370 x 124mm) x 3

Right Drawer Side (W370-124RH)

(370 x 124mm) x 3

Drawer Base

(T447-367)

(447 x 367mm) x 3

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

1 2 3 4

Base (DF1969A)

(1461 x 470mm)

Top (D2047A)

(1495 x 496mm)

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Divider (DF1870)

(1883 x 469mm)

Horizontal (DF1871)

(468 x 468mm)

Small Divider (DF1872)

(489 x 469mm)

Mirror Door (DF1858A)

(1399 x 494mm)

(Mirror - SG14 1376 x 311mm Safety Back SAR)

9 10

Large Shelf (D2052A)

(965 x 467mm)

Back Rail (D2053A)

(965 x 120mm)

Plinth (D2054A)

(1461 x 80mm) x 2

Small Shelf (D2060A)

(479 x 467mm)

Plain Door (D2056A)

(1894 x 494mm) x 2

Large Hanging Rail (FHR957)

(957mm long) x 2

Small Hanging Rail (FHR471)

(471mm long) x 2

Large Back (X956)

(1914 x 988mm)

Small Back (X955)

(1914 x 499mm)

Left Side (D2048C)

(1978 x 471mm)

Right Side (D2049C)

(1978 x 471mm)

1615

Please check you have all the fittings listed below

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Wooden dowel (F22) x 14

Metal dowel (F901) x 26

Nail screw (F277) x 6

Large locking nut (F900) x 20

Nail (F51) x 45

Shelf stud (F110) x 8

13mm Screw (F63) x 30

Rail holder

(F1014) x 8

40mm Screw (F910) x 4

Plastic Nail (F91) x 6

Back holder (F276) x 6

* These can also be round

Small locking nut (F3) x 6

Wedgefix (F639) x 6

9mm Screw (F73) x 12

9mm Screw (F74) x 6

Drawer runner (F1004) x 6

Knock-in Peg (F171GY) x 12

Handle screw (F461) x 12

Hinge plate (F523) x 11

Hinge (F518) x 11

Strap Screw Washer x 2

Overbalance protector kit (F269) x 1

Large Handle

(FBARH224 ) x 3

Small Handle

(FBARHANDLE ) x 3

mm 10 20 30 40mm 10 20 30 40 50

Ruler - Use this ruler to help

correctly identify the screws

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

x 3

Step 2

Prepare the 3 drawer fronts

Screw 2 metal dowels into each of the drawer fronts .

Note: Tighten the metal dowels up fully against the panels.

Prepare the drawer sides

Insert a small locking nut into the hole shown on the left drawer side and the right drawer side .

Note: The arrow on the locking nut must point towards the hole in the edge of the panel.

Step 3

Attach the drawer sides to the drawer fronts

Push the left drawer sides . and right drawer sides . onto the back of the drawer fronts .

Turn the small locking nuts on the left drawer side and right drawer side .

Note: Turn the locking nuts clockwise to secure panels - more than 1/2 a turn.

2 3

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base down the grooves in the drawer sides and and down into the groove in the drawer front .

Step 5

Fit the drawer back

Fit the drawer back between the drawer sides and . Make sure that the drawer base fits into the groove in the drawer back .

Hold the drawer back in position and tap the knock-in pegs through the holes in the drawer sides and .

Step 6

2 3

Step 7

Fit the wedgefixes

Turn the drawer assemblies over and slide 2 wedgefixes into the front and back grooves, as shown, and tighten up the screws.

x 3

Attach the handles

Attach a small handle to each drawer front using 2 screws .

+ 14 hidden pages