Argos Malibu - 3 Drawer Wide Chest, ZNM3DW-PB-AR ASSEMBLY INSTRUCTIONS

MADE IN

BRITAIN

Dimensions

Width - 75cm

Depth - 39.5cm

Height - 60.5cm

Malibu - 3 Drawer Wide Chest

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 5 - 23/10/14

Important - Please read these instructions fully before starting assembly

275/8903

244/8914

274/4027

244/9061

268/4905

248/3632

266/8859

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 20.5kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the bracket supplied.

• Dispose of all packaging carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

1 2

Left Side (D2821A)

(591 x 394mm)

Left Drawer Side (W370-124LH)

(370 x 124mm) x 3

Right Drawer Side (W370-124RH)

(370 x 124mm) x 3

Right Side (D2822A)

(591 x 394mm)

8 9

Top (D2774B)

(747 x 396mm)

Drawer Front (D2783A)

(710 x 156mm) x 3

Back Rail (D2779A)

(714 x 60mm)

Plinth (D2778A)

(714 x 92mm)

Rail (D2780A)

(714 x 72mm)

Drawer Back (W682-124)

(682 x 124mm) x 3

Drawer Base (T693-367)

(693 x 367mm) x 3

Back (X511-738)

(511 x 738mm)

Please check you have all the fittings listed below

Tools required

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Rule Scissors Hammer

Eye protection (when using a hammer or drill)

Cross-head screwdriver

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Electric drill (only use when drilling into walls)

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Wooden dowel (F22) x 10

Metal dowel (F901) x 8

Large locking nut (F900) x 2

Small locking nut (F3) x 6

40mm Screw (F910) x 4

25mm Screw (F50) x 6

Nail (F51) x 16

Knock-in Peg (F171GY) x 12

Handle (F631) x 6

Plastic Nail (F91) x 4

9mm Screw (F74) x 6

9mm Screw (F73) x 12

Wedgefix (F639) x 12

Drawer runner (F1004) x 6

+ 8 hidden pages