Argos ZKEN12R-WHO-AR ASSEMBLY INSTRUCTIONS

MADE IN

BRITAIN

Dimensions

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

Important - Please read these instructions fully before starting assembly

Kensington - 1 Drawer 2 Door Robe

Assembly Instructions - Please keep for future reference

424/1360

404/4275

Issue 1 - 18/06/15

Width - 85.9cm

Depth - 49.5cm

Height - 198.8cm

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 54kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

1

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the overbalance protector kit supplied or, an alternative fixing method of your choice.

• Dispose of all packaging carefully and responsibly.

Drawer Front (DF2414)

(79.1 x 19.2cm)

Drawer Back (W765-124)

(76.5 x 12.4cm)

Left Drawer Side (W370-124LH)

(37 x 12.4cm)

Drawer Base (T776-367)

(77.6 x 36.7cm)

Right Drawer Side (W370-124RH)

(37 x 12.4cm)

Components - Panels

Please check you have all the panels listed below

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

1 2 3

4 5

Tools required

Scissors / Rule / Hammer / Cross-head screwdriver / Square / Spirit level / Step ladder

Eye protection (when using a hammer or drill) / Electric drill (only use when drilling into walls)

Components - Panels

Please check you have all the panels listed below

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

2

6

7

9

8

11 12

Left Side (DF4501)

(197.3 X 47.5cm)

Right Side (DF4502)

(197.3 X 47.5cm)

Top (DF2409)

(85.9 x 49.5cm)

Shelf (DF2413)

(79.7 x 47.4cm)

Rail (DF2412)

(79.7 x 8.9cm) x 4

Front Plinth (DF2417)

(85.9 x 9.2cm)

Side Plinth (DF2431)

(47.5 x 9.1cm) x 2

Left Door (DF3740)

(163.2 x 39.4cm)

Right Door (DF4504)

(163.2 x 39.4cm)

Back (X1914-823)

(191.4 x 82.3cm)

13

14 15

16

Hanging Rail (FHR791)

(79.1cm long)

10

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Components - Fittings

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

3

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

A B

D E F

G H I

L

N

Small locking nut (F3) x 2

C

Nail (F51) x 34

M

J K

O

Drawer runner (F1004) x 2

Knock-in Peg (F171GY) x 4

Large locking nut (F900) x 18

Metal dowel (F901) x 20

Wooden dowel (F22) x 18

25mm Screw (F50) x 6

19mm Screw (F461) x 4

9mm Screw (F74) x 2

9mm Screw (F73) x 4

Plastic Nail (F91) x 4

Handle (F220) x 4

P Q

Hinge plate (F523) x 6

Hinge (F522) x 6

S

Shelf stud (F110) x 2

Rail Holder (F891) x 2

13mm Screw (F63) x 16

Wedgefix (F639) x 4

R T

Strap

Screw Washer x 2

Overbalance protector kit (F269) x 1

1

Assembly Instructions

4

Step 1

A

C

2

3

Step 2

Prepare the drawer front

Screw 2 metal dowels into the drawer front .

Note: Tighten the metal dowels up fully against the panels.

A

1

Prepare the drawer sides

Insert a small locking nut into the hole shown on the left drawer side and the right drawer side .

Note: The arrow on the locking nut must point towards the hole in the edge of the panel.

Step 3

C

2

3

Attach the drawer sides to the drawer fronts

Push the left drawer sides . and right drawer sides . onto the back of the drawer fronts .

Turn the small locking nuts on the left drawer side and right drawer side .

Note: Turn the locking nuts clockwise to secure panels - more than 1/2 a turn.

2 3

1

C

2 3

A

1

2

3

1

Assembly Instructions

5

Step 4

F

Fit the drawer base

Slide the drawer base down the grooves in the drawer sides and and down into the groove in the drawer front .

Step 5

Fit the drawer back

Fit the drawer back between the drawer sides and . Make sure that the drawer base fits into the groove in the drawer back .

Hold the drawer back in position and tap the knock-in pegs through the holes in the drawer sides and .

Step 6

5

2 3

1

4

2 3

5

4

F

2 3

Step 7

Fit the wedgefixes

Turn the drawer assembly over and slide 4 wedgefixes into the front and back grooves, as shown, and tighten up the screws.

N

F

N

5

2

3

4

2

3

5

Attach the handles

Attach 2 handles to the drawer front using screws .

H

1

R

H

R

1

Argos ZKEN12R-PUNO-AR, ZKEN12R-WHO-AR, Kensington - 1 Drawer 2 Door Robe ASSEMBLY INSTRUCTIONS