Argos ZKEN03MR-O-A, 4689386, ZKEN03MR-WHO-AR ASSEMBLY INSTRUCTIONS

MADE IN

BRITAIN

Dimensions

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

Important - Please read these instructions fully before starting assembly

Kensington - 3 Door Mirror Robe

Assembly Instructions - Please keep for future reference

411/7542

413/6949

Width - 125.6cm

Depth - 49.5cm

Height - 198.8cm

Issue 1 - 16/06/15

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 93kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

1

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the overbalance protector kit supplied or, an alternative fixing method of your choice.

• Dispose of all packaging carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

Top (DF3757)

(125.6 x 49.5cm)

Base (DF3765)

(119.4 x 47.4cm)

Inner Top (DF3766)

(119.4 x 47.4cm)

Wide Shelf (DF3761)

(79.7 x 45cm)

1 2

3 4

Narrow Shelf (DF3764)

(38.2 x 45cm) x 4

5

Components - Panels

Please check you have all the panels listed below

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

2

Front Plinth (DF3762)

(125.6 x 9.2cm)

Rail (DF3760)

(119.4 x 9.2cm) x 2

Side Plinth (DF2431)

(47.5 x 9.1cm) x 2

Plain Door (DF3767)

(184.5 x 39.4cm) x 2

Mirror Door (DF5210)

(184.5 x 39.4cm)

(Mirror - SG29

177.6 x 30cm Safety Back SAR)

Small Back (X1892-401)

(189.2 x 40.1cm)

Large Back (X1892-816)

(189.2 x 81.6cm)

Left Side (DF3758)

(197.3 x 47.5cm)

6

Right Side (DF3759)

(197.3 x 47.5cm)

Divider (DF3763)

(185.1 x 45.1cm)

7 8

10

9

11

13 14 15 16

Hanging Rail (FHR791)

(79.1cm long)

12

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Components - Fittings

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020

3

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Tools required

Scissors / Rule / Hammer / Cross-head screwdriver / Square / Spirit level / Step ladder

Eye protection (when using a hammer or drill)

Electric drill (only use when drilling into walls)

A B

D E

G H

C

F

P Q

Large locking nut (F900) x 24

Metal dowel (F901) x 24 Wooden dowel (F22) x 26

Hinge plate (F523) x 12

Hinge (F522) x 12

I

40mm Screw (F910) x 2

19mm Screw (F461) x 2

Back holder (F276) x 6

* These can also be round

Nail screw (F277) x 6

L

Shelf stud (F110) x 16

N

Handle (F220) x 2

J K

Nail (F51) x 42

Plastic Nail (F91) x 6

13mm Screw (F63) x 28

25mm Screw (F50) x 4

M

Rail Holder (F891) x 2

O

Strap

Screw Washer x 2

Overbalance protector kit (F269) x 1

Assembly Instructions

4

Step 1

C

Prepare the divider

a: Screw 2 metal

dowels into the divider .

Note: Tighten the metal dowels up fully against the panels.

Insert 2 large locking nuts into the divider .

Note: The arrow on the locking nut must point towards the hole in the edge of the panel.

Tap 4 wooden dowels into the divider .

Note: Wooden dowels must not stick out from the edge by more than 10mm or they may damage other panels.

b: To fit the rail holder

screw through the top hole with screw and into the mark hole drilled in the divider . Make sure that it is fitted straight, in line with the panel edges and then fit another screw using the lower hole.

Fit 4 hinge plates onto the divider , making sure that the slot is facing towards the finished front edge.

A

8

C

8

A

G

M

G

M

10mm

C

B

M

G

8

G

P

8

b:

a:

B

A

C

Finished

front edge

8

1

G

M

Finished

front edge

P

8

Finished

front edge

Finished

front edge

C

Assembly Instructions

5

Step 2

Step 3

Prepare the inner top

Screw 2 metal dowels into the inner top .

Insert 4 large locking nuts into the inner top . .

Tap 4 wooden dowels into the inner top .

3

C

3

B

C

A

Finished

front edge

Important: The inner top is very similar to the base but, the inner top will only have holes on one surface.

3

A

B

Fit the inner top to the divider

Push the inner top onto the divider .

Use a screwdriver to tighten the 2 large locking nuts fitted to the divider .

Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.

Step 4

3

8

B

8

3

8

B

C

Prepare the wide shelf

Insert 4 large locking nuts into the wide shelf .

Tap 4 wooden dowels into the wide shelf .

4

C

4

B

Finished

front edge

A

3

4