MADE IN
BRITAIN
Dimensions
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Important - Please read these instructions fully before starting assembly
Hayward - Left Shelf TV Unit
Assembly Instructions - Please keep for future reference
411/4909
411/5568
Width - 38cm
Depth - 39cm
Height - 58.5cm
Issue 1 - 10/07/15
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Warning: This unit weighs
approximately 31kgs.
Please lift with care.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Parts of the assembly will be
easier with 2 people.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor (use opened
out unit carton).
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Safety note: If there is any
chance of this unit being pulled
over by children etc. it is
recommended that the unit is
secured to a wall using suitable
fixings (not supplied).
• Dispose of all packaging
carefully and responsibly.
1
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Components - Panels
Please check you have all the panels listed below
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
2
1
2 3
5
4
7
6
8
9 10 11
Left Side (DF3372)
(41.6 x 37.1cm)
Right Side (DF3647)
(41.6 x 37.1cm)
Left Divider (DF3649)
(38.5 x 36.8cm)
Right Divider (DF3650)
(38.5 x 36.8cm)
Top (DF4021)
(150 x 38.9cm)
Base (DF4022)
(146 x 37cm)
Left Door (DF3378)
(39.2 x 44.7cm)
Right Door (DF5018)
(39.2 x 44.7cm)
Back (X896-411)
(89.6 x 41.1cm)
Fixed Shelf (DF3097)
(57.5 x 36.7cm) x 2
Loose Shelf (DF3648)
(42.75 x 36.7cm) x 2
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
Components - Fittings
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Tools required
3
Ruler - Use this ruler to help correctly identify the screws
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Rule
Scissors Hammer
Eye protection
(when using a
hammer or drill)
Cross-head
screwdriver
Square
Bradawl
Spirit
level
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
A B
D E F
G H I
L
C
40mm Screw (F910) x 4
KJ
Large locking
nut (F900) x 20
Metal dowel (F901) x 20
Shelf stud (F110) x 8
19mm Screw (F461) x 4
13mm Screw (F63) x 8
Hinge (F518) x 4
Hinge plate
(F523) x 4
M
25mm Screw (F50) x 4
Nail (F51) x 20
Plastic Nail (F91) x 4
Feet (F854) x 4
Handle (F306) x 2
Finished
front edge
Finished
front edge
Assembly Instructions
4
Step 1
Step 2
B
Prepare the right
divider
Insert 2 large locking
nuts into the right
divider .
B
4
a:
b:
Prepare the left
divider
Insert 2 large locking
nuts into the left
divider .
Note: The arrow on the
locking nut must point
towards the hole in the
edge of the panel
Fit 2 hinge plates onto
the left divider ,
making sure that the slot
is facing towards the
finished front edge.
Turn the left divider
over
b: Screw 4 metal dowels
. into the left divider .
Note: Tighten the metal
dowels up fully against
the panels.
J
J
3
B
3
J
J
B
B
3
B
B
A
A
A
A
A
Turn the left
divider over
Finished
front edge
3
A
4
Finished
front edge
Finished
front edge
Finished
front edge
Assembly Instructions
5
Step 3
Step 4
Prepare the 2 fixed
shelves
Insert 4 large locking
nuts into each of the
2 fixed shelves .
B
8
A
B
Fit a fixed shelf to the
left divider
Push a fixed shelf
onto the left divider .
Use a screwdriver to
tighten the 2 large
locking nuts fitted to
the fixed shelf .
Note: Turn the large
locking nuts as far as
they will go - more than
1/2 a turn.
3
8
B
B
8
Step 5
Fit the other fixed
shelf
Push the fixed shelf
onto the left divider .
Use a screwdriver to
tighten the 2 large
locking nuts fitted to
the fixed shelf .
3
8
B
8
x 2
B
B
B
B
Finished
front edge
3
8
3
8
8
Finished
front edge
Finished
front edge
Assembly Instructions
6
Step 6
Finished
front edge
B
B
B
B
F
M
F
M
F
M
F
M
M
7
F
7
Prepare the base
Insert 4 large locking
nuts into the base .
Screw the 4 feet into
the mark holes in the
base using screws
.
B
7
a:
Fit the base
Attach the base to
the left divider using
2 screws .
7
3
E
E
E
E
E
Step 7
Fit the right divider
Attach the right divider
to the base using 2
screws .
4
7
E
Step 8
7
7
3
4
Finished
front edge
B
Assembly Instructions
7
Step 9
Prepare the left side
Screw 6 metal dowels
into the left side .
Insert 2 large locking
nuts into the left side
. .
Step 10
1
A
B
1
J
Prepare the right side
Screw 2 metal dowels
into the right side .
Insert 2 large locking
nuts into the right
side .
Fit 2 hinge plates onto
the right side , making
sure that the slot is
facing towards the
finished front edge.
2
A
J
2
B
2
A
A
A
A
A
A
B
1
Finished
front edge
A
A
J
J
B
B
2
Fit the side panels
Push the left side
and right side onto
the assembly.
Use a screwdriver
to tighten the 8 large
locking nuts fitted to
the base and the 2
fixed shelves .
1
2
B
7
8
Step 11
Finished
front edge
Finished
front edge
4
1
2
7
8
8
Finished
front edge
Polystyrene
blocks
Polystyrene
blocks
Polystyrene
blocks
Assembly Instructions
8
Step 12
Fit the top
Note: To make it easier
to fit the top, place
polystyrene blocks from
the packaging
underneath the side and
divider panels to raise
the assembly.
Push the top onto
the assembly.
Use a screwdriver to
tighten the 8 large
locking nuts fitted to
the left side , right
side , left divider
and right divider .
Step 13
Prepare the top
Screw 8 metal dowels
into the top .
5
A
5
B
1
2
4
3
Finished
front edge
A
A
A
A
A
A
A
A
5
1
2
4
3
5
b:
C
Assembly Instructions
9
Step 14
Step 15
Fit the back
a: Square up the unit by
making sure that
measurement x to x
equals y to y.
b: Place the back
onto the unit.
Nail around the
outside edges of the
back and into the
back edge of the right
divider , as shown.
Note: Nails should be
spaced about 150mm
apart.
11
C
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
11
4
Warning: The
unit is heavy.
Lift with care.
Fit the 4 plastic nails
Tap 2 plastic nails
into the bottom edge of
each of the sides and
. .
Stand the unit up for
the next step.
I
1
2
yy
yy
xx
xx
I
I
I
I
1
2
11
4
Assembly Instructions
10
Step 16
Step 17
Fit the shelf studs
For each of the 2 loose
shelves , insert 4 shelf
studs .
6
D
Fit the 2 loose shelves
Lower the 2 loose
shelves down onto
the shelf studs .
6
D
Step 18
90
K
Prepare the 2 doors
Push fit 2 hinges into
each of the doors
and .
Secure each hinge with
2 screws .
Note: Before securing
with the screws, make
sure that the hinges are
positioned at 90 degrees
with the edge of the
door.
H
K
10
9
D
x 4
D
x 4
6
6
K
H
H
K
H
H
K
H
H
K
H
H
10
9
Assembly Instructions
11
Step 19
Fit doors and handles
Note: The easiest way to
attach each door and
. is to fit the top hinge
first, then align and fit the
other hinge.
a: Push the hinge
onto the front part of the
hinge plate .
The recess at the bottom
of screw B goes into the
slot in the hinge plate.
b: Keep the hinge
FLAT against the hinge
plate as you slide it
across as far as it will go.
Tighten screw A.
c: The hinge must be
flat against the hinge
plate prior to any
adjustment.
d: The hinge must
NOT be AT AN ANGLE
to the hinge plate
when assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot
in the hinge plate
and the hinge
would not be
secure.
Remove the hinge
from the hinge
plate and then reassemble being careful
to follow instructions a-c.
e: Attach a handle to
each door and
using screws .
K
K
K
J
J
J
K
J
L
G
9
10
9 10
e:
a: b:
c: d:
J
K
J
J
B
J
K
K
K
A
K
J
B
G
G
L
10
9
L
Assembly Instructions
12
Step 20
Adjust the doors if
needed
a: Before adjusting the
doors, use a spirit level
to check the base (or
top) of the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level
BEFORE making any
adjustment to the hinges,
as shown.
b: Height adjustment.
Loosen screws A on
hinge plates and move
door up or down as
required.
Retighten screw A.
c: Forward and Back
adjustment.
Loosen screw B on hinge
plate and move door in
or out as required.
Retighten screw B.
d: Sideways
adjustment.
To move door ‘out’
loosen screw C.
To move door ‘in’ tighten
screw C.
b:
c:
d:
a:
A
A
B
C
Assembly Instructions
13
Step 21
Assembly is complete
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
ALR3144
Loading...