Argos ZCVD2R-BLO-AR, ZCVD2R-MW-AR, ZCVD2R-WO-AR, ZCVD2R-FE-AR ASSEMBLY INSTRUCTIONS

MADE IN
BRITAIN
Dimensions
Width - 69cm
Depth - 49.5cm
Height - 200cm
Cheval - 2 Door Robe
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 10/01/14
Important - Please read these instructions fully before starting assembly
146/7965
147/4068
152/7324
146/8548
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Warning: This unit weighs approximately 44.5kgs. Please lift with care.
• Check you have all the components and tools listed on pages 2 and 3.
• Remove all fittings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Parts of the assembly will be easier with 2 people.
• Make sure you have enough space to layout the parts before starting.
• Do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its final position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).
1
Care and maintenance
• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• From time to time check that there are no loose screws on this unit.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.
• We do not recommend the use of power drill/drivers for
inserting screws, as this could damage the unit. Only use hand screwdrivers.
Safety note: It is recommended that this unit is secured to a wall using the bracket supplied.
• Dispose of all packaging carefully and responsibly.
Components - Panels
Please check you have all the panels listed below
2
1 2
If you have damaged or missing components, call the
Customer Helpline: 08456 400800 quoting the reference
numbers below
4
3
Top (D2721A)
(690 x 494mm)
5
Horizontal (D2722A)
(654 x 456mm) x 2
Door (D2725A)
(1888 x 337mm) x 2
Back (X1890-674)
(1890 x 674mm)
Plinth (D2723A)
(654 x 86mm)
6
8
9
Hanging Rail (FHR646)
(646mm long)
7
Right Side (D2719A)
(1981 x 458mm)
Left Side (D2720A)
(1981 x 458mm)
Rail (D2724A)
(654 x 86mm) x 2
Please check you have all the fittings listed below
3
Components - Fittings
If you have damaged or missing components, call the
Customer Helpline: 08456 400800 quoting the reference
numbers below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
A
Wooden dowel (F22) x 18
B
Metal dowel (F901) x 14
C
D E
Large locking nut (F900) x 14
F
G H I
L
Nail (F51) x 35
Ruler - Use this ruler to help correctly identify the screws
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
J
M
K
Rail Holder (F891) x 2
19mm Screw (F461) x 4
13mm Screw (F63) x 1613mm Screw (F79) x 1
Bracket (F327) x 1
Handle (F274) x 2
Tools required
Rule
Scissors
Spirit level
Hammer Bradawl
Eye protection (when using a hammer or drill)
Cross-head screwdriver
Step ladder
Electric drill (only use when drilling into walls)
Square
mm
10
20
30
40
50
60
70
80
90
100
mm
10
20
30
40
50
60
70
80
90
100
40mm Screw (F910) x 4
Hinge (F518) x 6
Hinge plate (F523) x 6
N
Plastic Nail (F91) x 4
Loading...
+ 8 hidden pages