Argos ZCVD2MR-BLO-AR, ZCVD2MR-MW-AR, ZCVD2MR-WO-AR, ZCVD2MR-FE-AR ASSEMBLY INSTRUCTIONS

MADE IN

BRITAIN

Dimensions

Width - 69cm

Depth - 49.5cm

Height - 200cm

Cheval - 2 Door Mirror Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 31/01/14

Important - Please read these instructions fully before starting assembly

147/8985

151/7626

147/4549

151/3091

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 52kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 and 3.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the bracket supplied.

• Dispose of all packaging carefully and responsibly.

IMPORTANT INFORMATION ABOUT THIS PRODUCT

This product complies with the requirements of BS 7449:1991 and has been manufactured by

DECORATIVE PANELS FURNITURE LTD, TEESSIDE INDUSTRIAL ESTATE,

THORNABY-ON-TEES, CLEVELAND, TS17 9LT

The product code for this unit and the item code(s) for the glass components are listed in the Assembly

Instructions along with a description of the type of glass used. All clear/tinted glass complies with the requirements of BS 6206 Class A. All mirrors comply with the requirements of BS 6206 Class C. If the

glass component contained in this unit is chipped or broken consult the furniture manufacturer, retailer,

or agent with regard to obtaining a manufacturing specification and shape for replacement glass

quoting the unit description and batch number or date of manufacture.

Do not place very hot or very cold items against or in close proximity to glass surface(s) unless

adequately thick insulating material is used to prevent such items coming in contact with the glass.

Do not strike the glass with hard or pointed items.

Do not sit or stand upon horizontal glass surfaces.

When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if

necessary - do not use washing powders or any other substance containing abrasives since these

substances scratch glass.

If stated in the instruction leaflet, it is essential that this unit is fixed to a wall.

KEEP THESE INSTRUCTIONS FOR FUTURE USE

Components - Panels

Please check you have all the panels listed below

1 2

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Top (D2721A)

(690 x 494mm)

Horizontal (D2722A)

(654 x 456mm) x 2

Back (X1890-674)

(1890 x 674mm)

Plinth (D2723A)

(654 x 86mm)

Hanging Rail (FHR646)

(646mm long)

Right Side (D2719A)

(1981 x 458mm)

Left Side (D2720A)

(1981 x 458mm)

Rail (D2724A)

(654 x 86mm) x 2

Mirror Door (D2725MA)

(1888 x 337mm) x 2

(Mirror - SG24 1817 x 260mm Safety Back SAR)

Please check you have all the fittings listed below

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Wooden dowel (F22) x 18

Metal dowel (F901) x 14

D E

Large locking nut (F900) x 14

G H I

Nail (F51) x 35

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Rail Holder (F891) x 2

19mm Screw (F461) x 4

13mm Screw (F63) x 1613mm Screw (F79) x 1

Bracket (F327) x 1

Handle (F274) x 2

Tools required

Rule

Scissors

Spirit level

Hammer Bradawl

Eye protection (when using a hammer or drill)

Cross-head screwdriver

Step ladder

Electric drill (only use when drilling into walls)

Square

100

40mm Screw (F910) x 4

Hinge (F518) x 6

Hinge plate (F523) x 6

Plastic Nail (F91) x 4

+ 8 hidden pages