Argos Valencia - Corner Wall Cabinet, 633-2992, 633-2978, 205-3079, 633-2985 ASSEMBLY INSTRUCTIONS

...

MADE IN

BRITAIN

Dimensions

Width - 57cm

Depth - 57cm

Height - 72cm

Valencia - Corner Wall Cabinet

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 2 - 05/08/14

Important - Please read these instructions fully before starting assembly

656/5752

633/2992

633/2978

205/3079

633/2985

203/7215

hygena

Black Door Pack

Cream Door Pack

Oak Door Pack

White Gloss Door Pack

White HN Door Pack

Cabinet

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs approximately 16kgs. Please lift with care.

• Check you have all the components and tools listed on pages 2 to 5.

• Remove all fittings from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Parts of the assembly will be easier with 2 people.

• Make sure you have enough space to layout the parts before starting.

• Do not stand or put weight on the product, this could cause damage.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.

• From time to time check that there are no loose screws on this unit.

• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.

Tools required

Rule Scissors Hammer

Eye protection (when using a hammer or drill)

Cross-head screwdriver

Electric drill

• We do not recommend the use of power drill/drivers for

inserting screws, as this could damage the unit. Only use hand screwdrivers.

• Safety note: It is recommended that this unit is secured to a wall using the brackets supplied.

• Dispose of all packaging carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

2 3

Top/Base (DPF101A)

(566 x 566mm) x 2

Loose Shelf (DPF102A)

(545 x 545mm)

Back (DPF103A)

(205 x 684mm)

End Panel (DPF141A)

(320 x 716 mm) x 2

5 6

Left Back Panel (DPF104A)

(430 x 694 mm)

Right Back Panel (DPF105A)

(430 x 694 mm)

Door (DPF144B)

(238 x 716mm) x 2

Please check you have all the fittings listed below

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Wooden dowel (F22) x 12

Metal dowel (F901) x 8

Large locking nut (F900) x 8

G H

13mm Screw (F63) x 8

19mm Connecting bolt (F461) x 2

25mm Screw (F50) x 4

Connecting Sleeve (F432) x 2

Shelf support (F110) x 5

Wall bracket (F198) x 2

Hanging bracket

(F849) x 2

40mm Screw (F910) x 2

Bent Hinge Arm (F154) x 2

Cantilevered

Hinge Arm

(F155) x 2

Nail (F51) x 8

Soft Close Unit (F156)

x 2

2mm Hinge Plate (F157) x 2

4mm Hinge Plate (F158) x 2

RRa

25mm Screw (F132) x 2

Handle (F214) x 1

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Step 2

Choose which way you would like the door to open

You can fit the door to the left side or right side.

If you would like your door

to open this way, fit the

hinge plates to the left side

If you would like your door

to open this way, fit the

hinge plates to the right side

Prepare the left end panel

Refer to step 1 and, if required, fit 2 hinge

plates onto the left end panel , orientated as shown.

Screw 4 metal dowels into the holes shown on the left end panel .

Note: Tighten metal dowels up fully against the panels.

Fit a hanging bracket to the left side using 2 screws , making sure that the hook is towards the back edge.

This will be the

left end panel

Q K

H=2H=4

H=4

H=2

Assembly Instructions

Step 3

Step 4

Prepare the top and base

Insert 4 large locking nuts into the top and base as shown.

Note: Arrow on locking nut must point towards hole in edge of panel.

Tap 4 wooden dowels into the top and base . as shown.

Note: Wooden dowels must not stick out from the edge by more than 10mm or they may damage other panels.

10mm

This will be the right end panel

Prepare the right end panel

Refer to step 1 and, if required, fit 2 hinge

plates onto the right end panel , orientated as shown.

Screw 4 metal dowels into the holes shown on the right end panel .

Note: Tighten metal dowels up fully against the panels.

Fit a hanging bracket to the right side using 2 screws , making sure that the hook is towards the back edge.

Q K

H=2H=4

H=4

H=2

+ 14 hidden pages