Argos Tall 6 Drawer chest ASSEMBLY INSTRUCTIONS

Tall 6 Drawer Chest

Assembly Instructions - Please keep for future reference

002 xx 4502

Dimensions

Width - 70.0cm

Depth - 39.0cm

Height - 105.5cm

GREAT BRITAIN

Proof

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08450613967
Please turn to back page for important information when contacting Customer Helpline.

01709 534123

MADE IN

Rev A - 01/04/2014

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

Check you have all the
components and tools listed on
pages 2 and 3.

Remove all fittings from the
plastic bags and seperate them
into their groups.

Keep children and animals
away from the work area, small
parts could choke if swallowed.

Make sure you have enough
space to layout the parts before
starting.

Care and maintenance

Do not stand or put weight on
the product, this could cause
damage.

Assemble the item as close
to its final position (in the same
room) as possible.

Assemble on a soft level
surface to avoid damaging the
unit or your floor.

Parts of the assembly will be
easier with 2 people.

We do not
recommend the
use of power
drill/drivers for

inserting screws,

as this could damage the unit.
Only use hand screwdrivers.

Do Not dispose of packaging
until assembly complete.

Dispose of all packaging
carefully and responsibly
when assembly complete.

To protect the furniture,
position the furniture out of
direct sunlight and away from
direct heat sources such as
radiators and fires.

Do not place the furniture in
excessively dry and humid
conditions.

From time to time check that
there are no loose screws on
this unit.

Always lift furniture when
moving it (do not drag)
otherwise the joints may be
damaged.

Do not place hot or cold
objects on the surface, always
use protective mats to avoid
marking the furnture.

This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.

Clean spills up immediately

Dust surfaces with a soft, dry,
lint free cloth.

More stubborn marks can be
removed using a damp
(not wet) cloth. Wipe the
surface dry immediately
using a soft lint free cloth.

Do not use detergents, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these
may damage the surface finish.

1

Proof

Components - Panels

Please check you have all the panels listed below

Important - Thick lines indicate finished edges

622xx4500

Left drawer side x6 (33.0x10.0cm)

9458

9459

Top (70.0x39.0cm)

Plinth x3 (63.4x9.2cm)

Backpanel (98.6x64.4cm)9464

623xx4500

Right drawer side x6 (33.0x10.0cm)

624xx7010

Drawer back x6 (60.1x10cm)

8552

Draw Front x6

(63x15.7cm)

684006532

Trim x 2 (104.0cm long)

9462

Left End Panel

(104.0x38.6m)

9457

Drawer Bottom x6

(61.2x32.8cm)

9463

Right End Panel

(104.0x38.6cm)

Proof

2

If you have damaged or missing components, call the

Components - Fittings

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly, In some case more
fittings may be supplied than are required.

Customer Helpline: 0845 0613967

for important information when contacting Customer Helpline.

01709 534123

Please turn to back page

M

A

D

G

J

Large cam x 16
Code 760001103

Panel pin x 8
Code 760001012

20mm bolt x 12
Code 700002006

9mm bolt x 12
Code 690001078

12mm screw x 2
Code 690001099

E

H

B

K

Metal dowel x 28
Code 760003004

8mm screw x 24
Code 700003510

Runner x 12
Code 760001040

Panel Holder x 3
Code 680003505

C

F

L

Small cam x 12
Code 760003005

Panel pin guide x 1
Code 684004501

I

Handle x 6
Code 644003511

Support bracket x 1
Code 760001901

Tools required

Cross headed screwdriver
(medium & large )

Small Hammer

Ruler - Use this ruler to help correctly identify the screws

Tape Measure

Proof

mm

10

0

3

20

30

40

50

60

70

80

90

100

110

120

130

140

Eye protection
(when using a
hammer)

160

150

170

Exploded View

684006532

9458

9464

9462

9463

622xx4500

9459

624xx7010

684006532

9457

8552

Proof

623xx4500

Drawers x 6

4

Assembly Instructions

Step 1

Fitting dowels to top
panel.

Insert 4 metal dowels
into the top panel

Note: Tighten metal
dowels up fully against
the panel.

Do not over-tighten.

B

9458

Step 2

Fitting cams to the
plinth panels.

Insert 4 cams into the
plinth panel

Repeat on the two
remaining plinth panels.

A

9459

B

x4

A

x12

B

B

B

9458

B

A

A

A

A

9459

x3

B

A

Step 3

Fitting cams and
dowels to the end
panels.

a: Insert 2 metal cams
and 6 metal dowels
into left end panel
.

9462

b: Insert 2 metal cams
and 6 metal dowels
into right end panel
.

9463

B

B

A

x4

A

A

A

B

Proof

B

x12

A

B

B

B

B

B

B

B

9462

A

A

A

B

B

9463

B

B

B

5

Assembly Instructions

Step 4

Attaching runners to
the end panels.

Position the runner so
that the second hole
from the front of the
runner lines up with the
pre-drilled hole nearest
to the edge of the panel.
Use screws to secure
the runner.

Front of runner

Slide the runner forward
revealing the back of the
runner. The second hole
to the back of the runner
will now line up with
the second pre-drilled
hole.

E

H

x12

A

B

A

B

E

x24

E

E

E

E

E

E

E

E

E

E

E

H

H

E

E

E

H

H

E

E

E

H

H

9462

E

E

E

H

H

9463

E

E

E

H

H

E

H

H

Front of Runner

E

H

Back of Runner

E

H

Step 5

A: Insert small cams

into left
and right
drawer sides.

Note: Ensure cam arrow
points towards the edge
with hole.

B: Insert wooden dowels

in drawer back

624xx7003

into holes in
left
right hand
drawer sides.

622xx4500

623xx4500

622xx4500

623xx4500

C

x12

A

Left hand side

622xx4500

B

B

x12

Left hand side

622xx7002

Right hand side

623xx4500

C

C

Drawer Back

624xx7010

Proof

Right hand side

623xx7002

6

Assembly Instructions

C: Insert 2 metal dowels

B

into the the drawer
fronts .

D: Slide drawer bottom

into grooves in the left
and right drawer sides
and the drawer back.

8552

C

B

622xx4500

D

Foil surface facing upwards.

Plain chipboard surface

to underside.

B

8552

624xx7010

9457

SLIDE!

623xx4500

E: Locate the metal

dowels (already inserted)
in the drawer front into the
small cams in the left and
right hand drawer sides.

Turn cams 180 degrees to
lock.

Repeat on all drawers.

Step 6

Fitting the handles
to drawer fronts.

Secure the handle with
2 bolts .

G

I

E

G

x12

624xx7010

9457

622xx4500

623xx4500

8552

I

x6

Repeat on all drawers.

7

G

G

Proof

I

9388

Assembly Instructions

Step 7

Connect left end to
the plinth panels

Connect the dowels in
the left end to the
cams in the plinth panels

9459

.

Turn cams 180 degrees
to lock.

Step 8

Connect right end to
the plinth panels

Connect the dowels in
the right end to the
cams in the plinth panels

9459

.

9462

9463

9462

9459

Step 9

Connect the top panel.

Connect the dowels in
the top panel to
the left end and
right end

9458

9462

9463

9463

9459

9462

9458

9463

Proof

8

Assembly Instructions

Step 10

Squaring up the unit.

IMPORTANT!

Ensure a tape
measure is used
to square unit up.

Before securing the back
it is necessary to square
up the unit.

You can do this by
measuring between
XX - XX and YY - YY
ensuring these are the
same (DIAG 1).

If they are not (DIAG 2)
Apply slight pressure as
indicated (DIAG 3) until
they are the same.

YY

YY

XX

DIAG 1

XX

YY

XX

YY

DIAG 2

XX

YY

XX

XX

XX

YY

XX

DIAG 3

YY

YY

Measure to

external corners

Step 11

Slide back panel into
grooves and secure.

Slide in the back panel.

You may need to tilt the
unit onto its top to ensure
that the back panel is
located into the groove.

Use the panel pin guide
when locating the panel
pins. This will hold the
panel pins vertical and
ensure the correct
distance from the edge.

D

x8

F

x1

D

F

9464

Proof

9

Assembly Instructions

Step 12

Add stability blocks.

Slide the thin point of the
stability blocks
between the back panel
and the grooves.

9464

Once inserted fully,
tighten the screws in the
stability blocks.

K

K

x3

K

K

K

K

9464

Step 13

Attaching the trims

Turn the unit over.

Locate the notch on
the trim into the grooves
in the end panels.

Ensure the trims are
positioned flush with the
bottom of the unit.

To insert trims use a
hammer, place a
cardboard packing piece
between the hammer
and the trims to
protect the trims.

Ensure that the trims
are inserted fully.

Proof

10

Assembly Instructions

Step 14

Fit the drawers.

Stand the unit up.

For this step we
recommend you follow
the helpful hints on the
next page.

J

x12

J

2nd Hole

11

Proof

Assembly Instructions

Step 15

Locate drawers helpful
hints

a: Pull sliding part of

drawer runners out
so they are fully
extended.

b: Locate drawer onto

runners.

c: Locate screwdriver

into second threaded
hole in drawer runner .

d: Keeping screwdriver

in place push the drawer
closed.The screwdriver
will push against the end
panel and extend the
drawer runner .

H

L

H

L

H

A

C

B

H

L

L

H

D

J

H

L

2nd Hole

e: Pull drawer out slowly

and line the hole in the
drawer side with the 2nd
threaded hole in the

L

H

runner . Now insert
bolts through the
drawer side and
into threaded hole in
runner .

f: Now insert bolts

through the drawer side
and into threaded hole in
runner .

J

J

J

L

H

l

J

J

L

H

E

F

H

J

J

2nd Hole

Proof

12

Assembly Instructions

Step 16

Fixing to wall

We recommend that this
unit is fixed to a suitable
wall to prevent possible
overbalancing. We have
included a fixing bracket
for this. No fixing screws
are provided as they will
need to suit the wall
type, and the length of
screw will depend on
the distance from the
back of the unit to the
wall. Please ensure
fixings used are
appropriate to your wall
type. Locate the bracket
to the top panel or to the
end panel as close to
top as possible. We do
not specify exact
location for the bracket,
this is left to the
customer’s discretion.

L

x1

M

x2

With help move the
unit into position.

Warning:
2 people to lift.
Lift with care.

Warning:

Please take care when
drilling into the wall,
avoiding any pipes and
wires. Wear safety
goggles when drilling.
The use of residual
current device (RCD) is
recommended when
working with tools.If in
doubt consult a
qualified person.

13

Proof

Assembly Instructions

Congratulations! Your unit is complete.

Important Information

If you need help or have damaged or missing parts, call the Customer Helpline:

8am - 4.30pm (Monday to Thursday)

01709 534123

0845 061 3967

(by contacting the customer service line your statutory rights are not aected)

Please have the following information to hand:

>> Unit Description
>> Product Code
>> Product Colour
>> Place of Purchase
>> Catalogue Ref. No.
>> Item Code
>> Assembly Instructions

We do have an answer machine should you contact us out of office hours, so in addition to
the above information could you leave your name, address, daytime telephone number and
the nature of your call on the answerphone. All calls will be actioned asap.

8am - 2.30pm (Fridays)

You can also e-mail your requests to us at:

customer.helpdesk@addspace.co.uk

Alternatively, you can write to us at: Customer Service Department, Addspace Furniture Limited,
Braithwell Way, Hellaby Industrial Estate, Hellaby, Rotherham, South Yorkshire, S66 8QY.

Proof

Notes

Proof