Glass Top Coffee Table
Assembly Instructions - Please keep for future reference 246/4675
Dimensions
Width - 90cm
Depth - 45cm
Height - 45cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 26/03/14
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
• Make sure you have enough
space to layout the parts before
starting.
Glass safety – Take care when handling glass, please follow the advice below
● If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
● Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
● Do not strike the glass with
hard or pointed items.
● When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
● Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Components - Panels
Please check you have all the panels listed below
1
Top glass panel
3
2
Bolt
Leg
If you have damaged or missing components,
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly. In some cases more
A
Wood dowel x 8
D
Nut x 8
B C
E
Spanner x 1
call the Customer Helpline: 08456 400800
Wrench x 1 Washer x 4
F
Foot pad x 4
Tools required
Wrench
(Provided)
Spanner
(Provided)
2
Assembly Instructions
Step 1
Fitting nuts and dowels
Screw nut to one head
of Bolt . Screw nut on
by approximate 15mm.
Firmly push wooden
dowels into indicated
holes in Leg .
Repeat this step for
other 3 Bolts and other
3 Legs.
D
2
A
3
A
D
2 3
Step 2
Attaching Bolts
Lay the Top glass panel
upside down on a
1
soft surface.
Screw end of bolt with
nut on into the centre
hole of the blocks on
Top Glass panel
until hand tight.
Turn the nut against the
metal block firmly as
shown.
Note: Use Spanner
to tighten the nut.
1
E
2
1
E
3
Assembly Instructions
Step 3
Firmly push Legs onto
the Bolts , make
2
3
sure the wood dowels
enter corresponding
holes in the top panel
blocks.
Step 4
Put one Washer onto
each bolt head, screw
D
Nut on the head of
bolt, tighten with
Wrench .
B
C
3
2
B
D
C
Peel off the cover of the
Foot pad , attach to
the end of Leg .
F
3
Turn the table upright.
Assembly is complete.
F
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Shaw Spencer Hometrading Ltd. 34-38 Vale Road, Bushey. WD23 2HE.
4
Loading...