Argos SIMONE ASSEMBLY INSTRUCTIONS

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 400800

Important - Please read these instructions fully before using the product

SIMONE

2221

Care and User Instructions - Please keep for future reference

823-8362

823-8379

823-1871

823-8355

823-8386

823-8393

Issue 1 - 25.10.2012

• Assemble on a soft level surface to

avoid damaging the sofa or your floor.

• Dispose of all packaging carefully and

responsibly.

• Parts of the assembly will be easier

with 2 people.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Make sure you have enough space to

work and layout the sofa.

• Once feet are securly attached return

the sofa to an upright position. To do this
the sofa must be lifted and turned. Avoid
using the feet as a lever as doing this
may lead to damage.

• Assemble the sofa as close to its final

position (in the same room) as possible.

With clean movements bring

the back cushions of the chair

back to their original shape.

Spread the leather evenly across
the seat cushions with the palms

of your hands

Give the arm pads a good plump

and then straighten them as

shown.

• Remove the protective cellopance

wrapping the sofa. Do not use sharp
tools that may damage the sofa
covering.

• Feet and accesories can be found by

opening the zip underneath the sofa. To
access this zip spread the cellophane
sheet on the floor, lower the sofa so that
the rear back panel rests against the
floor. Remove package containing the
feet and accesories, then install the feet.

Before your furniture leaves the factory, it is given a final inspection prior to secure wrapping for
distribution. Due to tight and secure wrapping to minimise movement during transit, when unwrapped,
the chair may appear a little "distressed". This is entirely normal, and the illustrations below show how
to rectify this in 3 easy steps:

Step 1

Step 2

Step 3

1

Issue 1 - 15.07.2013