Argos SALISBURY ASSEMBLY INSTRUCTIONS

338/4400 356/8604 360/9123 365/4666
359/8045 355/3516 333/6348 345/8673
331/4047 359/6449 331/4951 357/5752
455/2121 498/3154 455/1081 687/2744
711/9279 715/9662 855/4912 850/7749
854/2395 854/8818

If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400800

instructions for use - please keep for future reference

important - please read these instructions fully before using the product

salisbury

Issue 3 - 23-05-2018

Safety and Care Advice

important - Please read these instructions fully before starting assembly

• Assemble on a soft level surface to avoid damaging the sofa or your floor.

• Parts of the assembly will be easier with 2 people.

With clean movements bring
the back cushions of the chair
back to their original shape.

Spread the leather evenly across
the seat cushions with the palms
of your hands

Give the arm pads a good plump
and then straighten them as
shown.

Before your furniture leaves the factory, it is given a final inspection prior to secure wrapping for
distribution. Due to tight and secure wrapping to minimise movement during transit, when unwrapped, the
chair may appear a little "distressed". This is entirely normal, and the illustrations below show how to
rectify this in 3 easy steps:

Step 1

Step 2

• Make sure you have enough space to work and layout the sofa.

• Assemble the sofa as close to its final position (in the same room) as possible.

Step 3

• Remove the protective cellophane wrapping the sofa. Do not use sharp tools that may damage the sofa

covering.

• Feet and accessories can be found by opening the zip underneath the sofa. To access this zip spread

the cellophane sheet on the floor, lower the sofa so that the rear back panel rests against the floor.
Remove package containing the feet and accessories, then install the feet.

• Once feet are securely attached return the sofa to an upright position. To do this the sofa must be lifted

and turned. Avoid using the feet as a lever as doing this may lead to damage.

• Dispose of all packaging carefully and responsibly.

Issue 3 - 23-05-2018

Ref Quantity

4

M8 x 80

M5 x 70

Ref

Fixtures and Fittings supplied (Not Actual Size)

Dimensions (mm)

Visual

Quantity

4

Components, Fixtures and Fittings

Components supplied (not actual size)

1
4

Visual

1

2

A

B

Issue 3 - 23-05-2018