Page 1
Romantic TV Unit
Assembly Instructions - Please keep for future reference 607/1758
Dimensions
Width - 80cm
Depth - 33cm
Height - 52cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Issue 1 - Nov/20/16
Page 2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• From time to time check that
there are no loose screws on
this unit.
• Regularly check and ensure
tightend properly.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Page 3
If you have damaged or missing components, call the
Components - Panels
Customer Helpline:
Please check you have all the panels listed below
Top panel (80 x 33cm)
1
Right frame side (49.5 x 30.7cm)
3
Argos = 0345 6400800
Left frame side (49.5 x 30.7cm)
2
Top front rail (68 x 3.8cm)
4
Shelf panel (68 x 29cm)
5
Back rail (68 x 8.8cm)
7
9
Back drawer panel (63.1 x 14.8cm)
Bottom front rail (68 x 7.5cm)
6
8
Back panel (69.2 x 33.3cm)
10
Left side drawer panel (26 x 14.8cm)
11
Right side drawer panel (26 x 14.8cm)
13
Bottom drawer panel (64.3 x 24.8cm)
12
Drawer front (67.6 x 17.8cm)
2
Page 4
Components - Fittings
105
Note:
may be supplied than are required.
A
25mm Screw x 8 Allen key x 1
D
16mm Flat washer x 2
G
B
30mm Bolts x 2
E
10mm Spring washer x 2
H
C
F
35mm Cam bolts x 14
I
15mm Cam locks x 14 25mm Bolts x 2 30mm Metal handle x 2
K
20mm Pads x 4
Tools required
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Ruler/tape
measure
The screws length is measured from the head to the point (30mm screw shown).
3
Page 5
Assembly Instructions
Step 1
Insert Cam bolts
a: Insert Cam bolts
into top panel
as shown
F
1
.
a:
F
1
F
b: Insert Cam bolts
into left frame side
and right frame
2
side as shown
3
F
b:
F
F
2
F
F
F
F
3
4
Page 6
Assembly Instructions
Step 2
Assembly frame side
Insert Cam locks
into the shelf panel
back rail top front rail
,& bottom front rail
4
Press firmly together .
Turn the cam lock
clockwise with
a philipshead screwdriver
to lock.
Insert back panel
into the slot of back rail
& frame side .
7
7
G
5
6
8
3
7
G
G
5
4
G
6
3
Step 3
a: Assembly frame side
Insert Cam locks
into the shelf panel
back rail ,bottom
front rail and top
front rail . Press
firmly together . Turn the
cam lock clockwise with
a philipshead screwdriver
to lock.
b: Attach the pad
Remove cover paper on the
K
pad . Attach the pad
into under the legs.
With help stand the
assembled unit upright.
7
4
G
5
6
a:
7
G
G
Remove
2
b:
K
4
K
5
6
K
5
Page 7
Assembly Instructions
Step 3
Assembly Back panel
Insert back panel
into the slot of back rail
& frame side .
8
8
Step 5
Assembly top panel
Insert Cam locks
into side panel
as shown .Press top panel
onto assembly.Turn cam
1
locks to lock . Insert bolts
, Spring washer ,
B
flat washer , Tighten
with supplied allen key
Do not over tighten.
G
3
2
D
E
C
1
G
G
E
D
B
C
6
Page 8
Assembly Instructions
Step 6
Assembly Drawer
a:
Position Left side
drawer panel
right side drawer panel
11
into drawer front
12
Fix through holes
using screw
b:
Insert bottom drawer
panel into the slot of
side drawer panel and
drawer front panel.
13
,and
10
A
a:
b:
11
A
12
10
A
13
c:
Position back drawer
I
9
.
A
panel
Fix through holes
using screw
d:
Position metal handle
into top drawer
panel.
d:
c:
A
9
A
I
Fix through holes
using bolt
H
H
7
Page 9
Assembly Instructions
Step 7
Assembly Drawer
Position drawer into the
assembled unit .
8
Loading...