11
22
33
44
55
11
22
33
44
55
11
22
33
44
55
11
22
33
44
55
11
22
33
44
55
Matrix Black Sideboard
Assembly Instructions - Please keep for future reference
614/0744
Dimensions
Width - 80cm
Depth - 40cm
Height - 70cm
Important - Please read these instruction fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 12/01/09
Safety and Care Advice
Important - Please read these instru ctions fully before starting assembly
Do not stand on the product,
components and tools listed on
pages 2 and 3.
plastic bags and separate them
into their groups.
this could cause damage.
room) as possible.
as this could damage the unit.
Only use hand screwdrivers.
recommend the
use of power
drill/drivers for
inserting screws,
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
surface to avoid damaging the
easier with 2 people.
Care and maintenance
and mild detergent, do not use
bleach or abrasive cleaners.
This product complies with
BS 7449:1991
there are no loose screws on
this unit.
Argos plc
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Warning - Keep These Instructions For Future Reference
carefully and responsibly.
discarded with household
waste. Take to your local
authority waste disposal centre.
Batch No./Date of manufacture:
● Do not place very hot or very
cold items against or in close
proximity to glass surface unless
an adequately thick insulating
material is used to prevent such
items from coming into contact
with the glass.
● Do not strike the glass with
hard or pointed items.
● When cleaning glass panels
or mirrors use a damp or leather
with washing up liquid or soft
soap if necessary; do not use
washing powders or any other
substance containing abrasive
since these substances scratch
glass.
● This unit contains tempered
glass of nominal thickness
of 5 mm and 8mm
● The glass complies with Class
A of BS 6206
● If a glass is chipped or broken
replace with glass of the type
described on this label.
Consult the manufacturer,
retailer, or agent with regard
to obtaining a manufacturing
specification and shape for
replacement glass quoting the
model number, and batch
number or date of manufacture.
Note:
if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Components - Panels
Please check you have all the pan els listed below
1
Glass To p x 1
(80 x 40cm)
2
Top panel x 1
(80 x 40cm)
Metal tube x 4
3
(Ø2.5 x 60 cm)
4
Right side panel
(60 x 39.8cm)
7
Feet x 4 (Ø2.5 x 3.5 cm)
x 1
5
Left side panel x 1
(60 x 39.8cm)
Bottom panel x 1
6
(80 x 40cm)
8
Back Panel x 1
(73.5 x 62.6cm)
9
Shelf panel x 1
(70.8 x 37cm)
Glass door x 2
10
(59 x 35cm)
2
If you have damaged or missing components,
Ruler - Use this ruler to help correctly identify the screws
0 5101015152020252530303535404045455050555560606565707075758080858590909595
100
110
120
105
115
125
130
135
140
145
150
155
160
165
170
Tools required
Components - Fittings
call the Customer Helpline: 08456 400800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A
41mm Screw x 8
D
Door catch set x 1
G
Nail x 14
J
Hinge set x 2
Tools required
Crosshead screwdriver
(not included)
B
C
37mm cam pillar x 4 25mm Crosshead Screw x 8
E
12.5mm Cam x 4
H
Supporter x 4
F
38mm Screw x 4
I
Easy door assembly spring x 2
K
Counterplate set x 2
Hammer
(not included)
Ruler - Use this ruler to help correctly identify the screws
3
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
Assembly Instructions
Step 1
Attaching screws
A
Assemble 4pcs of
screws onto top
glass .
A
1
Step 2
Attaching panel
Assemble top panel
onto top glass .
2
1
A
Frosted side
1
2
A
Unfinished side
A
Step 3
Attaching metal tube
Assemble 4pcs of
metal tube onto the
screw .
3
A
1
3
3
3
3
2
4
Assembly Instructions
Assembly Instructions
Step 4
Attaching cam pillar
Assemble 4pcs of cam
pillars onto top
panel .
B
2
B
Step 5
Fitting dowels
Insert 4pcs of plastic
dowels into panel .
C
2
B
B
B
2
C
C
Step 6
Attaching d
set
Assemble door catch
set onto top panel .
D
oor catch
2
2
D
2
5
Assembly Instructions
Step 7
Attaching cams
Insert 2 pcs of cams
onto the left side panel
4
.
Please adjust the arrow
on cam to correct
position as shown.
E
E
E
4
Unfinished edge
Step 8
Attaching cams
Insert 2 pcs of cams
onto the right side panel
5
.
Please adjust the arrow
on cam to correct
position as shown.
E
E
5
E
Unfinished edge
6
Assembly Instructions
+
+
+
+
+
+
+
+
Step 9
Attaching panel
Two people are required
here.
Joint the top panel
to the panel & by
locking the cams as
shown.
4 5
D
5
Unfinished edge
5
4
2
2
4
Warning:
The unit is
heavy.
Lif t with care.
2
TURN
180°
Caution:
Tur n 180 Degree clockwise
to fasten the cams.
0° 90° 120° 180°
5
4
2
7
Assembly Instructions
+
+
+
+
+
+
+
+
+
+
+
+
Step 10
Attaching screws
Assemble 4pcs of
3
.
A
screws onto metal
tube
Step 11
Fitting dowels
A
A
A
3
A
3
C
C
Insert 4pcs of plastic
dowels onto panels
&
.
C
5
Step 12
Attaching panel
Two people are required
here.
Assemble bottom
6
panel
5
.
&
onto panels
4
5
4
6
Unfinished side
5
4
4
Warning:
The unit is
heavy.
Lif t with care.
8
Assembly Instructions
+
+
+
+
+
+
+
+
Step 13
Attaching screws
Assemble 4pcs of
screws onto bottom
panel .
F
6
Step 14
Attaching foot
Assemble 4pcs of
7
foot onto screws
F
F
6
5
4
7
A
A
.
A
6
7
A
A
Step 15
Attaching back panel
panel Align the onto
the unit.
8
5
4
Unfinished side
8
5
1
6
4
9
Assembly Instructions
Step 16
Fitting nails
G
Hammer 14 pcs of nails
G
onto panels .
8
Step 17
Fitting shelf support
Insert 4 pcs of shelf
support in the proper
position of panel & .
H
4
5
G
G
8
4
5
4
Step 18
Attaching shelf
unit.
9
Attach the shelf onto
H
H
5
4
9
Finished side
10
Assembly Instructions
1
2
3
4
5
1
2
3
4
5
Step 19
Insert
spring
Insert the 2pcs of door
assembly spring to
the bottom panel .
door assembly
I
6
Step 20
Door assembly
Please ensure you are
facing the frosted side
of this glass as
shown.
10
5
4
I
I
6
10
10
Incorrect assembly, not
as shown, will result
failure assembly on step
23.
a: Attach part as
shown.
b: Attach part as
shown.
J
Frosted side
a:
J
10
J
Frosted side
Unfrosted side
J
b:
11
Assembly Instructions
Step 21
Attaching door
Please make sure the
part as shown is the
J
correct one for
assembly at this stege.
CAUTION:
Before tighten the glass
with part , please
ensure the part align
to the edge of glass
.
door
J
J
Step 22
Attaching hinge set
Attach part onto
bottom board .
J
6
J
J
10
Frosted side
5
Step 23
Attaching door
Two people are required
here.
a:Insert part into top
panel .
2
b:Slide glass door into
J
part onto bottom
panel .
6
J
4
J
6
Frosted side
10
2
a:
J
5
J
6
4
J
b:
12
Assembly Instructions
1
2
3
4
5
1
2
3
4
5
Step 24
Attaching door
Before tighten the glass
with part , please
ensure the part align
to the glass door .
J
J
10
J
5
4
10
6
J
Step 25
Door assembly
a: Attach part as
shown.
b: Attach part as
shown.
Step 26
Attaching door
a:
J
J
10
Unfrosted side
J
J
b:
J
Please make sure the
J
part as shown is the
correct one for
assembly at this stege.
UTION:
CA
Before tighten the glass
with part , please
ensure the part align
to the edge of glass
door
.
13
J
J
10
Unfrosted side
J
10
Assembly Instructions
r
Step 27
Attaching hinge set
Attach part onto
bottom board .
J
6
Step 28
Attaching door
Two people are required
here.
a:Insert part into top
panel .
2
J
Frosted side
Frosted side
10
5
4
J
6
a:
5
J
4
b:Slide glass door into
J
part onto bottom
panel .
6
Step 29
Attaching door
Before tighten the glass
with part , please
ensure the part align
to the glass door .
J
J
10
10
6
Unfrosted side
5
10
J
b:
4
J
10
Frosted side
Unfrosted side
J
J
14
Assembly Instructions
1
2
3
4
5
Step 30
Attaching glass door
Remove the underlying
layer of the sticker
and attach to the glass
door at the position as
shown.
K
K
10
Frosted side
Unfrosted side
K
10
Step 31
Assembly is
complete.
MAX: 20 kgs
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
15
Matrix Sideboard
Assembly Instructions -
Please keep for future reference
614/0744
Dimensions
Width - 80cm
Depth - 40cm
Height - 70cm
Important - Please read these instruction fully before starting assembly
If you need help or haved amaged or missing parts,call the
Customer Helpline:08456 400800
Issue1-12/09/12
SafetyandCareAdvice
Important- Pleasereadtheseinstructionsfullybeforestartingassembly
Donotstandontheproduct,
componentsandtoolslistedon
pages2and3.
plasticbagsandseparatethem
intotheirgroups.
thiscouldcausedamage.
room)aspossible.
asthiscoulddamagetheunit.
Onlyusehandscrewdrivers.
recommendthe
useofpower
drill/driversfor
insertingscrews,
awayfromtheworkarea,small
partscouldchokeifswallowed.
spacetolayoutthepartsbefore
starting.
surfacetoavoiddamagingthe
easierwith2people.
Careandmaintenance
andmilddetergent,donotuse
bleachorabrasivecleaners.
Thisproductcomplieswith
BS14749
therearenoloosescrewson
thisunit.
ArgosLtd.MK92NW
Warning-KeepTheseInstructionsForFutureReference
carefullyandresponsibly.
discardedwithhousehold
waste.Taketoyourlocal
authoritywastedisposalcentre.
BatchNo./Dateofmanufacture:
● Donotplaceveryhotorvery
colditemsagainstorinclose
proximitytoglasssurfaceunless
anadequatelythickinsulating
materialisusedtopreventsuch
itemsfromcomingintocontact
withtheglass.
● Donotstriketheglasswith
hardorpointeditems.
● Whencleaningglasspanels
ormirrorsuseadamporleather
withwashingupliquidorsoft
soapifnecessary;donotuse
washingpowdersoranyother
substancecontainingabrasive
sincethesesubstancesscratch
glass.
●Ifaglasscomponentischipped
orbroken,stopusingtheproduct
andconsultthemanufactureror
supplier.
Note:
ifrequiredthenext
pagecanbecutoutandused
asreferencethroughoutthe
assembly.Keepthispagewith
theseinstructionsforfuture
reference.
1
Components - Panels
Please check you have all the panels listed below
1
Glass Top x 1
(80 x 40cm)
Unfinished edge
4
Left side panel x 1
(39.9 x 58.5cm) (39.9 x 58.5cm)
7
Feet x 4
(2.5 x 5cm)
2
Unfinished edge
5
Right side panel x 1
Top panel x 1
(80 x 40cm)
3
Metal tube x 4
(58.5 x 2.5cm)
6
Bottom panel x 1
(80 x 40cm)
8
Back Panel x 1
(74 x 61.5cm)
9
Shelf panel x 1
(71 X 37cm)
10
Glass door x 2
(59.2 x 35cm)
2
Components - Fittings
If you haved amaged or missing components,
call the C ustomer Helpline:08456400800
Please check you have all the
Note:The quantities beloware the correct amount to complete the assembly.In some cases more
fittings may be supplied than are required.
A
55mm Screw x 8 45mm Cam pillar
D
Door catch set x 1
G
15mm Screw x 16
J
Hinge set x 2
fittings listed below
B
x 4
E
12mm Cam x 4
H
Supporter x 4
K
Counter plate set x 2
C
30mm Dowel
F
45mm Screw x 4
I
Easy door assembly spring x 4
Tools required
Cross head screw driver
(not included)
Hammer
(not included)
Ruler- Usethisrulertohelpcorrectlyidentifythescrews
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120105 115 125 130 135 140 145 150 155 160 165 170
3
- to
Assembly Instructions
Step1
Attaching screws
A
Assemble 4 pcs of
screws onto top
glass
A
1
.
Step2
Attaching panel
Assemble top panel
onto top glass
.
1
A
A
1
A
2
2
Step3
Attaching metal tube
Assemble 4 pcs of
onto the
metal tube
screw
3
A
.
3
3
3
3
4
AssemblyInstructions
Assembly Instructions
Step4
Attaching cam pillar
Assemble 4pcs of cam
B
pillars onto top
panel .
B
2
Step5
Attaching door catch set
Assemble door catch
D
set onto top panel .
2
B
B
2
D
B
B
B
Step6
Fitting dowel
Insert 8 pcs of dowel
4
C
into panel .
5
2
C
C
C
C
4
5
C
C
C
C
5
Assembly Instructions
Step7
Attaching cams
Attach the top panel
onto the side panel
with cam to tighten.
E
4
2
5
5
E
E
E
2
E
4
E
E
Step8
Attaching screws
Assemble 4 pcs of
screws onto metal
tube
A
3
.
Unfinished edge
A
A
A
A
6
Assembly Instructions
Step9
Attaching panel
Two people are required
here.
Assemble bottom
6
.
F
6
.
onto panels
panel
5
&
Assemble 4 pcs of
screws onto bottom
panel
F
F
6
4
5
Unfinished edge
F
F
4
Step10
Attaching foot
Assemble 4 pcs of
7
foot onto screws .
A
7
7
7
7
7
Assembly Instructions
Step11
Insert
door assembly
spring
a:
Insert 2 pcs of door
assembly spring
the top
.
2
b:
Insert 2 pcs of door
assembly spring to
the bottom
6
.
to
I
I
2
I
I
Step12
Attaching back panel
Use screws to fix back
panel otno the unit.
G
8
I
Unfinished edge
I
6
G
G
8
G
8
Assembly Instructions
Step13
a:
Attaching shelf support
Insert 4 pcs of shelf support
H
in the proper position of
panel .
b:
Attaching shelf
Attach the shelf onto unit.
5
4
9
4
5
H
9
H
Step14
Attaching hinge set
Attach part onto
bottom board
J
6
.
J
J
6
J
J
9
Assembly Instructions
Step15
Attaching door
Please make sure the
part as shown is the
J
correct one for
assembly at this stage.
CAUTION:
Before tighten the glass
with part ,please
ensure the part align
to the edge of glass
door
J
J
.
J
Step16
Attaching door
Insert part
a:
panel .
2
J
into top
b:Slide glass door into
J
part onto bottom
panel .
6
10
10
Frosted side
Frosted side
2
a:
10
c:
Before tighten the glass
with part ,please
ensure the part align
to the glass door .
J
J
10
6
b:
c:
10
Assembly Instructions
Step17
Attaching door
a:Insert part into top
panel .
2
b:Slide glass door into
J
part onto bottom
panel .
6
J
Frostedside
2
a:
10
6
b:
c:
Before tighten the glass
with part ,please
ensure the part align
to the glass door .
Step18
Attaching glass door
Remove the underlying
layer of the sticker
and attach to the glass
door at the positionas
shown.
J
J
10
K
c:
1
K
2
3
10
K
11
10
Frosted side
Unfrosted side
Assembly Instructions
Step19
Assembly is
complete.
MAX:20 kgs
If you need help or haved amaged or missing parts,call the Customer Helpline:
08456 400800
12
Loading...