Argos Phoenix 2 Door Storage Cubes ASSEMBLY INSTRUCTIONS

Phoenix 2 Door Storage Cubes
Assembly Instructions
-
Please keep for future reference
157/5479
158/7364
158/8820
181/7326
Dimensions
Width - 70cm
Depth - 35.5cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
Version2 Date: 23/10/13
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the components and tools listed on pages 2 and 3.
rom the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Make sure you have enough space to layout the parts before starting.
• Do not use this item if any components are missing or damaged.
Care and maintenance
• Do not stand on the product, this could cause damage.
• Assemble the item as close to
room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your
r.
• Parts of the assembly will be easier with 2 people.
• Assembly to be carried out by the competent adult only.
• During assembly children should be kept away from the product due to the potential risk of injury.
• We do not recommend the use of power drill/drivers for
inserting screws,
as this could damage the unit. Only use hand screwdrivers.
• Dispose of all packaging carefully and responsibly.
• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• From time to time check that there are no loose screws on this unit.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.
IMPORTANT: RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
• Argos Ltd. MK9 2 NW. • This product is suitable for children in the age 6 or above.
• Maximum load: 20 kgs.
• Regularly check all fastenings to ensure that they are properly tightened.
Note: if required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.
1
If you have damaged or missing components,
Components - Panels
call the Customer Helpline: 08456 400800
Please check you have all the panels listed below
Top panel
1
Bottom panel
2
Pilot holes for guidance only
(69.9 x 34.9cm)
(69.9 x 34.9cm)
Pilot holes for guidance only
5
(33x 66.3cm)
Pilot holes for guidance only
Left door panel
Right door panel
6
(33 x 66.3cm)
Side panel x 2
3
Shelf
4
(66.8 x 33cm)
(66.8 x 34.9cm)
Back panel
7
(69x 69.5cm)
2
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required.
A
25mm Screw x 2
D
Door hinge x 4
G
12mm Screw x 4
J
Screw cover x 4
M
Wall plug x 1
Note
:
Please keep the
K L
B
Handle x 2
E
50mm Screw x 8
H
Door stopper x 1
K
14mm Screw x 3
N
33mm Screw x 1
C
Metal plate x 2
F
Nail x 18
I
Shelf support x 4
L
Wall strap x 2
Tools required
Phillips screwdriver (medium & large)
Bradawl (or sharp point)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
3
Small hammer
0 1 2 3 4 5 6
110 120 130 140 1500 10 20 30 40 50 60 70 80 90 100
Ruler/tape measure
Eye protection (when using a hammer or glue)
105
110 115 120 125 130 135 140 145 150 155 160 165 170
Assembly Instructions
Step 1
Attaching side panels
E
Bottom panel onto the Side panels .
2
3
Finished front edge
E
E
E
2
3
E
3
Step 2
Attaching door
a:
Door stopper onto the
Top panel .
Metal plate onto the Left door panel .
Insert the Door hinges into the Left door panel .
Repeat Step a with remaining Right door panel .
6
G
H
1
G
C
5
D
5
a:
Finished front edge
G
G
1
H
D
5
G
H
D
G
C
G
D
Continued on next page.
D
C
4
Assembly Instructions
Step 2 - continued
b:
Carefully locate the Left door panel and Right door panel onto the unit. aligning the Door hinges with the corre­sponding holes.
Top panel onto the unit.
Note:
Ensure the Door
hinges are aligned with the corresponding holes.
5
6
E
1
b:
Finished front edge
Finished front edge
E
E
E
1
5
6
E
Step 3
Fixing back panel
F
Back panel onto the unit.
7
Important:
The unit MUST be ‘square’ when the back is attached.
back edge
F
back surface
7
1
3
5
Assembly Instructions
Step 4
Attaching door
Attaching door
s Handles onto the Left door panel and Right door panel .
B
A
5
6
handles
handles
B
B
A
5
A
B
6
A
Step 5
Attaching shelf
Note:
Set the shelf supports to the desired height.
lnsert Shelf supports
a:
I
into the unit.
before
inserting the shelves.
a:
I
I
I
I
Continued on next page.
6
Assembly Instructions
Assembly Instructions (Robe)
Step 5 - continued
b:
Slide the Shelf into
the unit.
Use
Screw covers to
cover the screw heads.
4
J
b:
J
4
Finished front edge
J
J
J
Step 6
Finishing the unit
With help, place the unit in the intended position.
Assembly is complete.
7
Assembly Instructions
Step
7
Fixing with another unit
Warning:
The
Lift with care.
a:
U
S
Wall strap of link
another unit from the back.
It is recommended that the
Fixing to wall
With help, move the unit into position.
unit is heavy.
K
L
a:
X 2
b:
L
N
K
K
Top panel
Note:
Wall plugs supplied are
for solid wall only.
be used for your wall, seek professional advice if in doubt
M
L
N
wall
K
L
M
Warning:
Before drilling,
check wall for
hidden pipes
and cables.
b:
remove the unit.
Drill a hole and insert Wall
M
plug .
K
strap onto the top panel.
L
Reposition
strap using Screw .
N
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
8
A Guide to - Wall Mounting & Fixings
Important note:
If plastic wall plugs are supplied with your product:
- these are only suitable for use in masonry walls.
If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
Failure of the product due to
responsibility of the installer.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
5:
drilled hole.
Types of walls
No.1 “General Purpose” wall plug
Generally aerated blocks should not be used to support heavy loads, use
loads, general purpose wall plugs can be used.
No.2 “Plasterboard” wall plug
You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood.
No.3 “Cavity Fixing” wall plug
For use with plasterboard partitions or hollow wooden doors.
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
For use with walls stuck with
is secure to the retaining wall.
No.6 “Shield Anchor” wall plug
Heavy loads
For use when attaching light loads on to plasterboard partitions.
Care & Maintenance
heavy loads such as shelving, wall cabinets and coat racks.
Safety: Always check the fitting and location to ensure your safety in and around the home.
For use with heavier loads such as TV & HiFi speakers and satelite dishes etc.
Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose.
Revision 2 - 7/10/09
Loading...