OSCAR BOOKCASE
Assembly lnstructions - Please keep for future reference
408/5887
412/1947
413/7728
418/2388
Dimensions
Width - 83cm
Depth - 29 cm
Height - 80 cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Issue 1-16-04-15
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Keep this instructions for future
use.
Do not stand or put excessive
weight on the product, this
could cause damage.
From time to time check that
there are no loose screws on
this unit.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Components - Parts
lf you have damaged or missing components.
call the Customer Helpline :
0345 6400 800
inside
Divider x 2
1
(28.7x27.6x3cm)
inside
3
Side panel (small) x 2
(28.7x18.7x3cm)
underside
underside
shelf x 2
2
(79.9x28.8x3cm)
4
Side panel (large) x 2
(49.3x28.9x3cm)
inside
upside
Top panel x 2
5
(41.5x29x3cm)
Base panel x 2
6
(83x29x3cm)
2
Components - Fittings
0345 6400 800
A
Metal dowel x 24
D
Sticker x 28
G
12mm Wood screw x 2
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110115 120 125 130135 140 145 150
0
1 2 3 4 5 6
B C
E F
H
40mm Wood screw x 4
Ruler/tape measure
Locking nut x 24
EVA pad x 8
Wooden dowel x 28
F
Wall strap x 2
Phillips screwdriver
(Not supplied)
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
3
Assembly Instructions
Preparing divider and
shelf
Place divider and shelf
flat onto the floor with
2
1
the fixing holes facing up.
Screw metal dowels
into one end of shelf
A
2
as shown.
Note: Screw metal dowels
as far as shown.
Do not overtighten
Insert wood dowels into
panels and as
1
C
2
shown.
1
C
A
A
2
C
Assembling divider
With help, assemble divider
to shelf using
1
screws .
2
H
1
2
H
4
Assembly Instructions
Preparing side panels
Place small side panel
and large side panel
3
4
flat on the floor with fixing
holes facing up.
Screw metal dowels
into large side panel
A
4
as shown.
Note: Screw metal dowels
as far as shown.
Do not overtighten
Insert wood dowels into
panels and as
3
C
4
shown.
C
3
C
A
4
A
Assembling side panels
Carefully locate side panels
and into position as
3
4
shown.
Insert locking nuts into
the holes in shelf and
small side panel as
B
2
3
shown.
Turn locking nuts
B
clockwise to secure.
Stickers can be used
D
to cover the fixing holes.
B
3
2
B
D
4
B
D
5
Assembly Instructions
Preparing top panel and
base panel
Place top panel and
base panel flat on the
5
6
floor with the fixing holes
facing up.
Screw metal dowels
A
into both panels as shown.
Note:
Screw metal
dowels as far as shown.
Do not overtighten.
A
5
A
A
6
Assembling top panel
base panel
and
Carefully locate top panel
5 6
and base panel
into position as shown.
Insert locking nuts into
the holes in divider and
side panels and as
3
B
1
4
shown.
Turn locking nuts
B
clockwise to secure.
Stickers can be used
to cover the fixing holes.
D
B
5
D
B
4
1
3
B
D
6
6
Assembly Instructions
Repeat Steps 1 to 6 to
assemble the second shelf
unit.
a : Depending on the
configuration of shelves
you select, self adhesive
EVA pads can be used
on the base.
E
b : With help, carefully lift
the shelves into position.
Warning: The shelves
are heavy. Lift with care.
a:
6
E
E
Self
adhesive
b:
7
Assembly Instructions
8
It is recommended that
the unit is fixed to the wall
to ensure stability.
Assemble wall straps
to the back edge of top
panel using screws
H
.
With help, move the unit
to the desired location.
Mark the fixing hole
locations on the wall and
remove the unit.
Drill the wall and fit
suitable plugs for your wall
type.
Note: Wall plugs are not
supplied.
Warning: Before
drilling. Check the wall for
hidden pipes or
cables.Re-position the
unit and secure the wall
straps to the wall.
6
F
F
6
G
6
F
G
Note: Screws are not
supplied.
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
8
Loading...