White shorty frame - 175x76cm bed
Assembly Instructions - Please keep for future reference
3929755
Dimensions
Length - 182cm
Depth - 83cm
Height - 112cm
Weight - 23kg
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Issue 1 - 11/05/15
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
IMPORTANT, READ CAREFULLY -RETAIN FOR FUTURE REFERENCE.
ASSEMBLY:
Current legislation requires that the bunk bed must be fi tted with 4 safety-rails and a ladder or platform for
the upper bunk bed. The bunk bed meets the European EN 747-2012 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 175 cm. long and 76 cm. wide. The total thickness must not
exceed 16,1 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
WARNING:
High beds and upper beds of bunk beds are not suitable for children under six years due to the risk of injury
from falls. Do not use the bed if any structural part is broken or missing. Be aware that children can strangle
in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed/high bed.
WARNING:
Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not exceed 75 mm. or shall be more than 230 mm.
MAINTENANCE INSTRUCTIONS:
All assembly fastenings should always be tightened properly and that care should be taken that no fi ttings
are loose.
CLEANING:
LACQUERED: Wooden, lacquered and painted as well as laminated surfaces should be wiped over with a
cloth and a mild soap.
OIL: Oiled surfaces can be cleaned with soapy water, e.g. brown soap. Wipe with a clean cloth. To maintain
the natural life in the furniture which is provided by the oil treatment, we recommend an oil aftercare of the
furniture 1-2 times a year. The colourless natural oil for maintenance of oil-treated furniture is available at
your local furniture store.
1
If you have damaged or missing components,
Components - Parts
call the Customer Helpline: 0045 7668 8055
Please check you have all the parts listed below
Leg x4 (111.3x4.3x4.3cm)
1
No. 12-04311135-20
Endrail x2
4
No. 12-02007393-20
Safety rail 3/4 x2
7
136.0x6.5x2.0cm)
(
No. 12-02013602-20
(73.9x8.9x2.0cm)
Slat x14
2
No. 12-01507601
Endrail x4
5
No. 12-02007394-20
(76x6.5x1.5cm)
(73.9x6.5x2.0cm)
Ladder side x1
3
(111.3x8.9x2.0cm)
No. 12-02011132-20
Tread x 2 (35.0x6.5x2.0cm)
6
No. 12-02003503-20
Safety list x2
8
31.8x2.8x1.2cm)
(
No. 12-01203181-20
Safety rail 1/1 x2
9
(173.0x6.5x2.0cm)
No. 12-02017303-20
Bedside x2
10
173.0x8.9x2.0cm)
(
No. 1305-17302-20
2
Components - Fittings
Please check you have all the fi ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
No. 3913-06090
A
M6x90mm Connecting bolt x4
No. 3930-10045
D
10x45mm Dowel x26
No. 3909-63090
G
No. 3938-00010-2
i
ø10mm Cover cap plastic x18
No. 3922-06014
B
M6 Ø10x14mm Barrel nut x4
No. 3901-45060
E
C
4,0x30mm Chipboard screw x40
F
No. 3901-40030
No. 3909-63050
4,5x60mm Chipboard x2 6,3x50mm Assembly screw x8
No. 3938-00007-2
H
K
No. 4008-022
ø7mm Cover cap plastic x286,3x90mm Assembly screw x22
No. 3939-00012-20
J
ø12x10mm Cover cap wood x2
Angle 70x40,5x20mm x2
Tools required
Phillips
screwdriver
(medium)
Flatblade
screwdriver
(medium)
Allen key
4mm incl.
No. 4033-004
3
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Assembly Instructions
Step 1
Attach the dowels D to
4
the endrails
and to the bedside
and to the safety rails
9
and
.
and 5
10
7
Step 2
Attach the leg
endrails
3 screws
Allen Key.
Repeat same procedure
for both headboard and
footboard
1
to the
4
and 5 with
G
using the
D
5
D
G
x4
x2
4
x2
7
x2
10
x2
9
x2
5
5
D
Step 3
1
Attach the leg
endrails
3 screws
4
G
Allen Key.
Repeat same procedure
for both headboard and
footboard
to the
and 5 with
using the
4
1
x2
G
1
4
Assembly Instructions
Step 4
Attach the bedside 10
and the safety rails
9
to headboard and
footboard fi rstly by
placing the dowels in the
holes in headboard and
footboard.
The thin rail attached to
the bedsides should face
inwards.
B
Push barrel nut
the small hole in bedside
10
, the groove on
barrel nut
B
horizontal.
Push connecting bolt
through each leg
meet barrel nut
then fasten with the Allen
Key.
Attach the safety rail
to the leg
the screws
1
G
into
should be
1
to
B
and
with
.
x2
G
A
9
A
x2
G
B
x2
9
B
10
1
B
A
1
Step 5
10
B
B
1
7
to
into
1
to
and
with
A
7
Attach the bedside
and the safety rail
the end boards fi rstly by
placing the dowels in the
holes in endboards.
The thin rail attached to
the bedside should face
inwards.
Push barrel nut
the small hole in the
10
bedside
on barrel nut
the groove
B
should
be horizontal.
Push connecting bolt
through each leg
meet barrel nut
then fasten with the Allen
Key.
Attach the safety rail
through the leg
the screws
G
A
B
7
B
G
G
A
7
10
1
10
B
Ladder can be
positioned left or right!
5
Assembly Instructions
Step 6
Attach the 2 treads 6
with the assembly screws
G
through the leg 1.
G
6
1
Step 7
Attach the ladder side 3
7
3
with
6
with
to
3
J
.
to the safety rails
F
the screws
.
Attach the treads
the ladder side
F
the screws
.
Attach the ladder side
to the bedside 10 with
E
the screws
and cover
with the cover caps
10
F
7
E
J
F
6
3
6
Assembly Instructions
Step 8
Place 1 slat 2 in the
centre of the bed. Follow
the measurement .
10
Push the bedsides
together whilst attaching
2
slat
chipboard screws
to the bed with 2
C
.
10
780 mm
10
PUSH
C
2
PUSH
Step 9
Position the remaining 13
2
slats
a distance of 63,1 mm
between each.
Fasten each slat with 2
chipboard screws
in the bed with
C
.
63,1 mm
C
2 2 2 2 2 2 2 2 2 2 2 2 2
C
7
Assembly Instructions
Step 10
Attach the safety list
inside the bed, on the
front safety rails
Should be in the center
of the front guards
between the slats.
8
Attach it
rails
10
with chipboard
screws
to the safety
7
and the bedside
C
.
Follow the measurement.
Attach the safety list
on the outside of the
bed, on the back safety
9
rails
. Should be in
the center of the back
guards.
8
7
8
Max. mattress height !
8
7
7
C
9
9
10
2
8
C
8
Attach it
rails
10
with chipboard
screws
to the safety
9
and the bedside
C
.
Follow the measurement.
Attach wall mounting
K
brackets
to the leg 1
with chipboard screws
C
.
Max. mattress height !
1
KC
C
8
7
71 mm
7
71 mm
C
71 mm
71 mm
K
C
9
8
9
Assembly is complete.
10
If you need help or have damaged or missing parts,
call the Customer Helpline: 0045 7668 8055
E-mail: order@fl exa.dk
Ref.no. 44-01510-20 A Stand: 110515 Page 9 (80-12315-20)
10
8
Loading...