Argos JOSIE ASSEMBLY INSTRUCTIONS

2FT6 Josie Shorty Bunk Bed

Assembly Instructions

- Please keep for future reference

404/9373 425/5662 805/9792

Dimensions

Width - 180,0cm Depth - 88,0cm Height -154,6cm

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800

Issue 1 - 20/02/18

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

.

Check you have all the components and tools listed on pages 2 and 3.

.

Remove all ﬁttings from the plastic bags and separate them into their groups.

.

Keep children and animals away from the work area, small parts could choke if swallowed.

.

Make sure you have enough space to layout the parts before starting.

.

Assemble on a soft level surface to avoid damaging the unit or your ﬂoor.

Care and maintenance

.

Use an appropriate furniture polish for natural wood furniture and a dry cloth to clean the product.

.

Avoid placing the furniture in

direct sunlight as this will cause the timber to prematurely age.

.

This product contain

natural timber; you may

notice some variation in the grain and colour of different component parts which is normal for furniture produced using natural wood and is not the result of any manufacturing fault.

.

Do not stand or put weight on the product, this could cause damage.

.

Assemble the item as close to its ﬁnal position (in the same room) as possible.

.

From time to time check

that there are no loose screws on this unit.

.

We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.

.

Parts of the assembly will be

easier with 2 people.

.

Dispose of all packaging

carefully and responsibly.

.

This product should not be discarded with household waste. Take to your local authority waste disposal centre.

IMPORTANT, READ CAREFULLY -RETAIN FOR FUTURE REFERENCE. ASSEMBLY:

Current legislation requires that the bunk bed must be ﬁtted with 4 safety-rails and a ladder or platform for the upper bunk bed. The bunk bed meets the European EN 747-2012 standards for security and durability.

MATTRESS:

This bed is designed to use a mattress size 175 cm. long and 75,0 cm. wide. The total thickness must not exceed 16,0 cm. The mattress top must not pass the marking on the ladder.

WARNING:

High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injury from falls. Do not use the bed if any structural part is broken or missing. Be aware that children can strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed/high bed.

WARNING:

Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance between the top safety barrier and the wall shall not exceed 75 mm. or shall be more than 230 mm.

MAINTENANCE INSTRUCTIONS:

All assembly fastenings should always be tightened properly and that care should be taken that no loose.

CLEANING: LACQUERED: Wooden, lacquered and painted as well as laminated surfaces should be wiped over with a

cloth and a mild soap. OIL: Oiled surfaces can be cleaned with soapy water, e.g. brown soap. Wipe with a clean cloth. To maintain the natural life in the furniture which is provided by the oil treatment, we recommend an oil aftercare of the furniture 1-2 times a year. The colourless natural oil for maintenance of oil-treated furniture is available at your local furniture store.

ttings are

ﬁ

1

Components - Panels

Please check you have all the panels listed below

Left front foot/ right back foot x 2

1

(152,5 x 6,3 x 2,5 cm)

Left back foot

2

(152,5 x 6,3 x 2,5 cm)

Right front foot

3

(152,5 x 6,3 x 2,5 cm)

Wide bar x 4

4

(68,2 x 11,0 x 1,9 cm)

Narrow bar x6

5

(68,2 x 6,5 x 1,9 cm)

Curved bar with label

6

(68,2 x 9,0 x 1,9 cm)

Front side rail x2

7

(175,0 x 11,0 x 3,8 cm)

Back side rail x2

8

(175,0 x 11,0 x 3,8 cm)

Long guard rail x2

9

(175,0 x 6,5 x 1,9 cm)

Short guard rail x2

10

(141,2 x 6,5 x 1,9 cm)

Ladder side rail

11

(130,2 x 6,5 x 1,9 cm)

Step x 2

12

(35,7 x 6,5 x 1,9 cm)

Guard rail support x 2

13

(34,0 x 6,5 x 1,9 cm)

Slats x 26

14

(75,5 x 7,0 x 1,7 cm)

Curved bar

15

(68,2 x 9,0 x 1,9 cm)

2

If you have damaged or missing components,

Components - Fittings

call the Customer Helpline: 03456 400 800

Please check you have all the ﬁttings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more ﬁttings may be supplied than are required.

A

1/4 x 70mm x 17 Bolt X 8

D

Allen Key X1

G

10 x 40mm Wooden dowel

Tools required

Phillips screwdriver (medium & large)

X 56

B

Barrel nut X16

E

4 x 35mm Screw X 58

H

1/4 x 110mm x 17 Bolt X 8

C

7 x 100 x 17mm Bolt X 16

F

7 x 60 x 17mm Bolt X 14

I

Spacer 70mm x2

m

2

Ruler/tape measure

Small hammer

Ruler - Use this ruler to help correctly identify the screws

5

0

10 15 20 25 30 35 40

3

55

45

50

60 65 70

75

80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

Eye protection (when using a hammer)

Assembly InstructionsAssembly Instructions

Step 1Step 1

Inserting wooden dowels:

Insert wooden dowels

into the indicated parts.

G

2x2x2x2x

12

G

10

2x2x2x2x

9

2x

8

2x

7

G

6

G

6x

5

4x

04

G

15

Step 2Step 2

Footboard assembly:

4

Fit wide bars

bars and curved bar

5

to left front

back

2

foot .

Then, ﬁx narrow

bolts

Insert

shown

C

and allen key .

barrel nuts where

and ﬁx bolts .

using allen key .

Note correct holes position

on the posts.

Do not over tighten bolts.

Attention:

Make sure wide bars

4

are positioned as

shown in the diagram.

narrow

1

foot

bars using

B

D

and left

H

D

15

D

C

+

D

C

+

D

H

+

B

D

C

+

D

C

+

D

H

+

1

B

5

4

15

5

4

B

2

B

C

+

C

D

+

H

D

+

H

D

C

D

B

C

D

+

C

D

+

H

D

+

B

4

-

+

B

4

+

-

4

Assembly InstructionsAssembly Instructions

Step 3Step 3

Headboard assembly:

D

Fit wide bars

and narrow bars and curved bar with label

to right back foot

right front foot narrow bars using bolts and allen key barrel nuts where shown

and ﬁx bolts

allen key

4

5

6

1

and

3

.Then, ﬁx

C

D

. Insert

B

H

using

D

.

Note correct holes position

on the posts.

Do not over tighten bolts.

Attention:

D

C

+

D

C

+

D

H

+

D

C

+

H

+

B

C

6

5

1

B

4

BB

H

B

C

D

+

C

D

5

4

3

+

H

D

+

C

D

B

C

D

+

C

D

+

H

D

+

B

4

-

Make sure wide bars

5

and are positioned as

4

shown in the diagram.

Step 4Step 4

Attention:

From this step two people are required for

an easier assembly.

Fixing side rails to the headboard:

Insert barrel nuts into

side rails and

7

as shown. With help, ﬁx side rail to to headboard using bolts

A

and allen key .

B

8

D

EN 747+A1:2015

Product:

Josie Bunk Bed

Distributed by:

ARGOS LTD

Batch: 000/2016

Made in Brazil

To help prevent serious or fatal injuries from

Warning

Strangulation Hazard: Never attach or hang items to any part of the bunk bed that are not designed for use with this bed; for example, but not limited to, belts, bags, ropes and clothing.

.

- Never allow a child of under 6 years on upper bunk.

- Use ladder for entering and leaving upper bunk.

- Prohibit more than one person on upper bunk.

entrapment or falls:

Do not remove this label

B

A

8

+

B

4

+

-

A

D

+

B

A

D

+

B

Attention:

Make sure side rail is positioned as shown in the diagram.

5

7

A

D

ATTENTION!

Assembly InstructionsAssembly Instructions

Step 5Step 5

Fixing side rails to the

footboard:

Insert barrel nuts into

side rails and

7

B

8

as shown. With help, ﬁx side rail to to footboard using bolts

A

and allen key .

D

B

A

B

A

D

+

A

D

+

B

8

7

A

D

Step 6Step 6

Fixing back side rail:

Insert barrel nuts intoInsert barrel nuts into

back side rail and ﬁx

it to the headboard and footboard using bolts

and allen key .

Note

Do not fully tight screws

B

8

DD

A

D

+

B

8

B

A

D

+

B

6

Assembly InstructionsAssembly Instructions

Step 7

Fixing front side rail:

Insert barrel nuts into front side rail and ﬁx

B

7

it to the headboard and footboard using bolts

and allen key .

D

A

Note

Do not fully tight screws

Attention:

Make sure hole on side

8

rail is positioned as shown in the diagram.

A

D

+

B

D

A

B

7

+

ATTENTION!

Step 8

Fixing ladder:

Attach ladder side rail

11

using bolt and allen

D

key .

F

D

F

MATTRESS HEIGHT MUST NOT

BE ABOVE THIS LINE

D

F

+

11

D

F

+

7

Assembly InstructionsAssembly Instructions

Step 9

Fixing long guard rail:

D

F

+

D

F

+

Fix long guard rails to

9

the headboard and

footboard using boltsfootboard using bolts

and allen key .

DDD

F

Attention:

Finish tighten screws on side rails using allen key .

D

9

F

D

+

F

D

+

Step 10

Fixing short guard rail:

Fix short guard rail

to the footboard and ladder side rail using bolts

and allen key .

10

F

DD

D

F

D

+

F

D

+

10

F

D

+

F

D

+

8

Assembly InstructionsAssembly Instructions

Step 11

Fixing Steps:

Fix steps to the ladder

12

side rail and the headboard

using bolts and allen

DD

key .

F

D

F

+

12

D

F

D

+

12

F

D

+

Step 12

Fixing guard rail support:

Fix guard rail support

to the guard rails using screws .

E

13

E

13

E

9

Assembly InstructionsAssembly Instructions

Step 13

Fixing slats:

Please ﬁx the ﬁrst slats 14

at the ends of the rail and work towards the middle of the bed using the spacer as shown to ensure correct spacing.

Fix one side ﬁrst, using screws ,the ﬁx the other

E

side by pushing the rail against the slats if necessary.

I

!

60 - 72mm

!

I

14

I

14

1º

I

J

14

E

I

14

1º

14

1º

EEEE

E

EEEE

14

EEEE

EEEEEEEE

EEEE

EEEEEEEE

EEEE

14

EEEE

Periodically check that all

screws are tight.

Assemble is complete!

10

Argos JOSIE ASSEMBLY INSTRUCTIONS

Specifications and Main Features

Frequently Asked Questions

User Manual