Wow Walker Chair
Assembly Instructions - Please keep for future reference
481/8401
451/9872
481/1752
Dimensions
Width - 59.5 cm
Depth - 61 cm
Height - 101~110.5 cm
Important - Please read these instructions fully before starting assembly
If your need help or have damaged or missing parts, call the customer helpline: 0345 6400800
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Check you have all the
•
components and fittings.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area,small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• To avoid any risk of suffocation
to animals or children dispose
of the plastic bags immediately.
Do not stand or put weight on
•
the product during assembly,
this could cause damage.
• Assemble the item as close
to its final position(in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 pepole.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers,for
inserting screws
as this could damage the unit.
only use hand screwdrivers.
Dispose of all packaging
•
carefully and responsibly.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
If you have damaged or missing components, call the
Components - Panels
Customer Helpline: Argos = 0345 6400800
Please check you have all the components listed below
5 x Castor
1
1 x Cover
4
1 x Backrest
7
1 x Base
2
1 x Seat support
5
2 x Armrest
8
1 x Gas lift
3
1 x Seat cushion
6
If you have damaged or missing components, call the
Components - Fittings
Customer Helpline: Argos = 0345 6400800
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A 4 x Screw B 8 x Screw C 8 x Plastic cover
1/4 x 20mm 1/4 x 25mm
Tools required
Allen key 1 X M5 30mm/80mm
2
Assembly Instructions
Step 1
a:
Fitting the Base
2
a: Push all the five
Castors into the
underside of the Base .12
NOTE: Ensuer the
Casters are fully
inserted.
b: Insert the Gas lift 3
into the base.
NOTE: Ensure the
Gas lift is fully
inserted and well
fitted.
c: Slide the Cover 4 into
the base.
1
b:
3
2
c:
4
3
2
Step 2
Fitting the Seat support
Use screws to fix the
Seat support 5 onto the
seat cushion 6 . Ensure
the seat support is firmly
fitted onto the seat cushion.
3
A
A
A
A
A
5
6
Assembly Instructions
Step 3
Fitting the armrest
NOTE: It would be
useful to ask
someone to help you
at this stage.
a: Put seatplate 5 onto
gas lift 3 firmly
a:
5
3
b:Carefully attach the
screw to link the
armrest 8 with seat
cushion 6 on each
side,then put the
screw covers on
the Screw holes.
Note:Please don't tighten
up the screws before you
line all the screw holes up.
B
C
Step 4
Finishing the Unit
Carefully link the
backrest 7 with
armrest 8 by using
screw ,then put the
cover on it
A rubber hammer is
recommended to fix
the plastic covers
B
C
8
B
C
C
7
B
C
C
B
B
8
6
Note:Please don't tighten
up the screws before you
line all the screw holes up.
NOTE: If you have damaged or missing components, call the
Argos Limited
Group, 489-499 Avebury Boulevard, Central Milton keynes, MK9 2NW
4
Customer Helpline: 03456 400800
Loading...