Hearts Bed With 4 Poster Frame
Assembly Instructions - Please keep for future reference
323/8130
333/9613
Dimensions
Width - 197cm
Depth - 94cm
Height - 189cm
Important
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
- Please read these instructions fully before starting assembly
Issue 1 - 08//10/14
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
IMPORTANT!
KEEP FOR
FUTURE
REFERENCE
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Unit weight: 20.4 kgs.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Warnings
• Regularly check and ensure
that all bolts and fittings are
tightened properly.
• The recommended mattress
size is L1900 x W910 mm.
• This product should only be
used on firm, level ground.
• Make sure the legs remain in
contact with the ground.
• Not suitable for children under
4 years.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts.
• Prohibit your children from
bouncing and jumping on the
bed.
• Do not place this child’s bed
near heat sources, windows
(blind cords, curtain pulls or
other strings or cords) and other
furniture
• Place the bed tight to any wall
or have a gap of 300mm
between the wall and the side of
the bed.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
• Do not use this child’s bed if
any part is broken, torn or
missing.
• THIS BED COMPLIES WITH
BS8509:2008+A1:2011
Manufacturer: BL Packaging Co.
Ltd.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
If you have damaged or missing components, call the
Components - Parts
Customer Helpline: Argos = 0345 640 0800
Please check you have all the parts listed below
1
Headboard
(94 x 63 x 3.2cm)
4
Siderail x 2
(191.5 x 11 x 2.5cm)
2
Footboard
(94 x 76 x 3.2cm)
5
Headboard Upper Post x 2
(100 x 6.5 x Ø3.2cm)
3
Headboard leg x 2
(38 x Ø3.2cm)
6
Footboard Upper Post x 2
(120 x 6.5 x Ø3.2cm)
8
Top Rail Short x 2
(87.5 x Ø1.6cm)
7
Top Rail Long x 2
(191 x Ø1.6cm)
9
Slat x 24
(91 x 4 x 2.5cm)
2
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
M6 x 45mm Bolt x 4 M6 x 12mm Bolt x 12
D
Bolt nut x 4
B
M6 x 25mm Bolt x 4
E
Mattress stopper x 4
C
F
Allen key x 2
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
3
Assembly Instructions
Step 1
Assembling headboard
legs
1
Insert headboard legs
3
into holes on headboard
1
as shown.
3
3
1
3
Step 2
Assembling headboard
Attach siderails to
headboard & as
shown and fix through
holes using bolts and
bolt nuts .
D
Important:
Fasten bolts &
nuts using 2 allen
keys but do not
fully tighten at this
stage.
4
1 3
B
F
D
D
1
D
D
D
B
B
3
4
D
B
B
3
4
1
B
3
4
B
4
Assembly Instructions
Step 3
Assembling footboard
Attach footboard to
siderails as shown
4
and fix through holes
using bolts .
C
Important:
Fasten bolts
using allen key
but do not fully
tighten at this
stage.
2
2
C
2
4
C
F
C
4
4
C
C
2
C
Step 4
Assembling short top
rails
Attach upper posts
6
& into holes on short
top rail as shown and
8
fix through holes using
bolts .
C
Important:
Fasten bolts nuts
using allen key
but do not fully
tighten at this
stage.
5
F
8
C
5
C
5
8
8
C
C
5
6
C
6
5
Assembly Instructions
Step 5
Attaching upper rails
a: Insert headboard
upper post onto posts
of headboard as
shown.
b: Fix through holes
using bolts as shown.
Repeat above steps to
assemble the footboard
upper post .
5
1
C
Important:
Fasten bolts using
allen key but do
F
not fully tighten at
this stage.
6
a:
5
5
5
C
C
1
6
C
1
C
b:
5
6
1
1
C
Step 6
Assembling top rails
Attach top rails to
upper rails & as
shown and fix through
holes using bolts .
Important:
Fasten bolts
using allen key
but do not fully
tighten at this
stage.
7
5 6
A
6
A
5
F
A
7
5
A
6
7
A
6
7
A
6
6
Assembly Instructions
Step 7
Attaching slats
Insert each slats into
holes on side rails .
9
4
Lock it into position by
pushing firmly down with
your hand.
Note: Make sure
the slat is aligned
to the hole before
pushing it firmly
down.
Important:
After all slats are
positioned, tighten
all bolts & nuts
fixed in previous
steps using allen
F
keys .
9
4
9
x24
4
4
Step 8
Attaching mattress
stoppers
Insert the mattress
stoppers into holes on
the side rails as
shown.
E
4
E
4
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
7
Loading...