Argos HALLINGFORD 3 4R BEE ASSEMBLY INSTRUCTIONS
New Hallingford
4 Door 3 Drawer Wardrobe
DR899244
Assembly Instructions - Please keep for future reference
2478441
2497714
2574242
2377700
2588771
Dimensions
Tip : To prevent damage,
Width - 197,9cm
Depth - 60,3cm
Height -205,7cm
we recommend that you
build your unit on the
carton(s) it was packed in.
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit: www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928
For any other queries please contact the Customer Helpline on: 0345 640 2020
Issue 2 - 04-08-2015
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• From time to time check that
there are no loose screws on
this unit.
•To reduce the
likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
Warning: Only use a manual
screwdriver to attach the hinges.
• Dispose of all packaging
carefully and responsibly.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Instruction video
• This manual is provided with an additional instruction
video. If the icon on the right is displayed at a particular
step in the manual, Follow the link: http://nlink.nu/vid01
Or scan the QR code on the left with your phone.
See page 1 for link
to instruction video!
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
2
Components - Panels
For damaged or missing parts, please visit:
www.argos-support.co.uk or email: Help@ClickSpares.co.uk
Please check you have all the panels listed below
Left side
1
(205.6 x 58cm)
P2349b
Top/Bottom x 2
6
(194.9 x 57.7cm)
P1349
Drawer base x 3
9
(94.5 x 34.9cm)
BO33956
Right side
2
(205.6 x 58cm)
P2349b
Upright x2
3
(196.9 x 57.7cm)
P2354b
Large horizontal
7
(96.7 x 57.6cm)
P1342
Drawer wrap x 3
10
(35 x 95.8 x 10cm)
LA1868
Left mirror door
4
(151.2 x 48.8cm)
PS3725
Right mirror door
5
(151.2 x 48.8cm)
PS3719
Small horizontal x2
8
(47.6 x 57.6cm)
P1343
Drawer front x 3
11
(97.9 x 15.7cm)
P4316
Back x2
13
(199.3 x 48.8cm)
BO33902
Foldy back
14
(152.3 x 98cm)
BO33934
Door x 2
15
(199.2 x 48.8cm)
P3724
Plinth front
16
(194.8 x 14cm)
P7338C
Plinth back
17
(194.8 x 5.4cm)
P7339C
Pelmet
18
(198.1 x 4.5cm)
FA249
3
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
Components - Fittings
For damaged or missing parts, please visit:
www.argos-support.co.uk or email: Help@ClickSpares.co.uk
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Fittings Drawers
B
FK1980
FK1981
C
H
FK1011
20mm Screw x 12
J
Small locking
nut x 6
Fittings Carcase
A
40mm Screw x 11
E
10mm Fixing screw drawer x 12
H
24mm locking screw x 34
L
Nail holder x 1
Q
9mm Srew x 6
FK1010
FK1250
N
Drawerbase Support x 12
FK1324
FK1980
B
20mm Screw x 8
FK1301 FK1309
F
12.5 mm Screw x 6
FK1011
I
Large locking
FK1012
nut x 34
FK1419
FK1217
M
Hanger rail support x 6
FK1268
PM16951
R
24mm locking screw x 6
X
Glue x 1
D
15mm Screw x 45
FK1235
G
L-Bracket x 1
O
15mm Screw x 12
K
Nail x 60
P
Hinge back x 12
S
FA1510
FK1400
FK1311
FA1515
FK1269
FK1234
Hinge door x 12
GR1975
T
Runner x 6
PM1884
V
U
Hanger rail small x 2
Door/Drawer handle x 10
Hanger rail large x 1
Tools required
Phillips screwdriver
(medium & large)
Drill
Flatblade screwdriver
(medium)
Piercer
(small)
5mm Suitable drill bit
2.5mm Suitable drill bit
spirit level
Tape measure
Setsquare
Ruler - Use this ruler to help correctly identify the screws
PM1873
Stairs
Peg x 2
W
Wall plug and parkerscrew x 1
Small
hammer
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Ruler
Scissors
Eye protection
(when using a
hammer or drill)
ZF99936
4
Assembly Instructions
Step 1
Drawer assembly x 3
a: Insert two small locking
nuts J into drawer wrap
0.
Make sure the ‘arrow’ on
J is pointing towards the
hole in the edge of 0.
J
a:
10
J
H
H
11
b: Screw 24mm locking
screws H into holes
shown on back of drawer
front !.
Make sure 24mm locking
screws H are tightened
right up against drawer
front !.
c: Slide drawer base 0
into grooves shown on
drawer wrap 0.
b
H
H
11
c:
9
10
5
Loading...