Argos FSC110M ASSEMBLY INSTRUCTIONS

4x3M Waterproof Gazebo With 2 side Panels

Simple Assembly Instructions - Please keep for future reference 146/1648

Dimensions

Width - 300cm

Depth - 400cm

Height - 256cm

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 Retailer: Argos

Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks, MK9, 2NW

Issue 1 - 13/09/13

IMPORTANT SAFETY INSTRUCTIONS

Read all instruction before using and keep for future reference

Read these instructions carefully and familiarise yourself with the procedure before assembling the unit.

when assembly. Please keep children under direct supervision of adult when using.

four persons under light or no wind conditions.

Check that you have all the component parts following the list on the page 3 and familiarise yourself with each part before proceeding.

Take all the fittings out of the plastic bag and separate them into their groups.

Ensure you have enough space to lay out all the parts before assembly.

To avoid scratching it is recommended that you assemble the unit on a soft level surface.

CAUTION

under windy condition.

secure the gazebo when using.

structure and should be

disassembled and stored away after using.

until completely dry.

erect in windy conditions.

from screws, nails, staples, hooks, etc to avoid damage to the fabric and frame.

Warning:

weigh s approximately

kgs.

15.0

Please lift with care.

The unit

Fire precautions

near lights, fireplaces, gas or electric heaters, candles, radiators, or any other sources of heat, fire or flammable liquids.

Fabric cover that is not flame retardant.

Safety

animals or children dispose of the plastic bags immediately.

Cleaning

damp cloth and mild detergent, do not use bleach or abrasive products.

common sense when in use.

around the Gazebo. We recommend you advise no smoking while inside.

retardant cooking area and should not be use to house BBQs or other cooking methods.

2

Components - Parts & Fittings

If you have damaged or missing components, call the Customer Helpine: 0845 640 08 00

Please check you have all the parts listed below

1 2

1 x Gazebo Cover 1 x panel w/window 1 x panel

4

4 x Baseplate

1#

4 x Top Pole (Φ18 x 1050mm) 4 x Top Pole (Φ18 x 1073mm)

4#

5 6

2 x Middle Joint 4 x Corner Joint

2#

3

3#

8 x Support Pole (Φ24 x 998mm)

6#5#

4 x Support Pole (Φ24 x 950mm)

2 x Supplemental Pole(Φ24x1050mm)

11#

4 x Top Pole (Φ15 x 720mm)

Components - Fittings

4 x Leg Pole (Φ32 x 1022mm)

8#7#

1 x Top Pole (Φ18 x 980mm)

12#

4 x Top Pole (Φ15 x 770mm)

Please check you have all the fittings listed below

4 x Leg Pole (Φ32 x 1022mm)

10#

4 x Top Pole (Φ15 x 795mm)

A

Peg x 17 B Guy rope x 4 C Curtain Ring x 14

3

Assembly Instructions

Step 1

Insert Support Pole into the Support Poles

4#

3#

Meanwhile, insert Support

7#

Pole into Support

3#

Pole . Ensure all the poles are fully inserted and secure. See fig. 1&2

IMPORTANT: Because of the size of this unit we recommend that it is built in the place intended for using

NOTE: Locate the unit

on the flat Ground free from obstruction, in a sheltered area away from wind and heavy rain as this will damage the unit.

3# 4# 3#

Fig.1

3# 4# 3#7#

Fig.2

Step 2

Use Corner Joints to connect the Support Poles. Ensure all the poles are fully inserted and Secure.

See fig.3.

NOTE: It would be usefulto ask someone to help you at this step.

6

3#

4#

3#

3# 7#

6

7#

3#

4#

3# 3#

6

7#

4#

3#

6

Fig.3

4

Assembly Instructions

Stage 2 – Fitting the Top Poles

Step 3

Insert Top Poles into the Top Poles

2#

1#

Meanwhile insert Top Poles into the Top Poles . Ensure all

10#

12#

the poles are fully inserted and secure. See fig. 4&5

10#

1#

2#

Fig.4

12#

Fig.5

Step 4

Connect the Top Poles

2#

1#

& to Corner joint

6

and Centre Connector

5

, then put Tube into Centre Connector ensuring all poles are fully pushed into joins. See fig 6.

Use hooks provided at the end of pole and pole connecting pole -

12#

3#8#

See fig.6.

8#

5

10#

2#

1#

10#

2#

1#

12#

5

12#

10#

1#

2#

8#

1#

5

2#

NOTE: It would be usefulto ask someone to help you at this step.

Fig.6

5

Assembly Instructions

Stage 3 – Fitting the Gazebo

Step 5

Connect the top pole

11#

& .

Use hools provided at the end of pole and connecting pole and middle joint .

Insert Leg Pole into the unit. Ensure all the poles are fully inserted and secure. See fig. 7.

10# 11#

5

10#

4#

5#

10#

5#

11#

5

11#

10#

4#

11#

5#

Step 6

Carefully place the Gazebo Cover over the assembled roof. Then pull the Gazebo tightly over the assembled roof frame. See fig.8.

a:Use the velcro tapes top frame as shown

NOTE: It would be useful to ask someone to help you at this stage.

1

5#

Fig.7

1

a:

Fig.8

6

Assembly Instructions

Stage 4 – Fitting the Legs

Step 7

Insert the Baseplate into the Leg Poles Then insert the Leg Poles into the unit. Ensure all the poles are fully inserted and secure. See fig. 9.

6#

4

6#

J

4

6#

Fig.9

6#

4

5#

6#

Step 8

Attach the Gazebo Cover’s Hooks into holes on the Leg Poles . Tighten by moving the Hook to a lower hole. See fig.12.

6#

4

6#

4

Fig.10

6#

NOTE: It would be usefulto ask someone to help you at this step.

Hook

4

Fig.12

7

Assembly Instructions

Stage 5 – Fitting the Guy Ropes

Step 9

Attach the D Ring into the Baseplates .

See fig. 13.

Attach the end of the Guy Rope to the corner of the top cover ring on the Gazebo. Then attaché one end to the peg and drive the Peg into the ground. See fig. 15. 16 and 17.

4

B

Fig.15

Fig.14

Use the same method as in fig. 14 to fix the other Guy Ropes.

The length of Guy Ropes can be adjusted. See fig.17.

NOTE: The pegs are for location purpose only. They will not support the unit in high winds. See above instructions.

Step 10

Caution: Do not assemble or disassemble during strong winds.

Attach the Panels both and at the top using the

3

Curtain Ring , secure the Panels to the Gazebo legs by Velcro Tapes at side See fig.18.19.

Velcro tape of roof stick with the panel both and See fig. 20

C

2 3

2

B

Fig.17

Fig.19

Velcro tape

Fig.13

4

Fig.20

B

A

Fig.16

C

Fig.18

3

2

9

Assembly Instructions

Stage 6 – Fitting the Peg

Step 11

Insert the pegs to two sides wall in the bottom.

See fig.21.

Assembled one is shown as right. See fig.22.

Assemble is complete.

NOTE: It would be useful to ask someone to help you at this step.

A

3

A

2

Fig.22

A

3

A

3

2

3

A

Fig.21

A

Warning: in heavy wind , if you want to leave the gazebo outside , please remove the side panels

Important: always use this product with caution and read the important safety instructions.

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800 Retailer: Argos Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks, MK9, 2NW

10