White Toddler bed - 140x70cm
Assembly Instructions - Please keep for future reference
4277891
Dimensions
Length - 144cm
Depth - 75cm
Height - 57cm
Weight - 13kg
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Issue 1 - 11/05/15
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
80-12801-20 Toddler bed
IMPORTANT! KEEP FOR FUTURE REFERENCE
PLEASE DISPOSE OF PACKAGING MATERIAL.
PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN
WARNING! This bed is suitable for a child from 18 months to 4 years.
WARNING! Do not place this child’s bed near heat sources, windows and other furniture.
WARNING! Do not use this child’s bed if any of the parts are broken, torn or missing.
WARNING! Once assembled, this bed must not be disassembled. Screws must not be removed once inserted.
This child’s bed is to be used with a 1400mm x 700mm maƩress.
All assembly Įxings should be checked periodically and re-Ɵghtened where necessary.
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not
be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be
placed either Ɵght to any wall or have a gap of 300mm between the wall and the side of the bed.
Any addiƟonal or rep
lacement parts should only be obtained from the manufacturer or distributor.
This product complies to standard BS8509: 2008+A1:2011
CARE AND MAINTENANCE
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
Glue safety - Take care when using glue, please follow the advice below
Skin contact: Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Eye contact: Rinse immediately
with clean water for 15 minutes
and seek medical advice.
If swallowed: Seek medical
advice immediately.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
2
Components - Parts
call the Customer Helpline:
Please check you have all the parts listed below
If you have damaged or missing components,
0045 7668 8055
Leg short x2
1
(34.7x6.5x2.0cm)
No. 12-02003472-20 No. 12-02004991-20
End rail x3
4
(62x8.9x2.0cm)
No. 12-02006201-20
Leg long x2
2
(49.9x6.5x2.0cm)
Safety rail x2
5
(100x8.9x2.0cm)
Top rail x2
3
(75x6.5x2.0cm)
No. 12-02007502-20
Slat x12
6
(69.7x6.5x1.5cm)
No. 12-01506971No. 12-02010001-20
Bedside right x1
7
(140x8.9x2.0cm)
List x2
9
(138x2.0x2.0cm)
No. 12-02013801
Bedside left x1
8
(140x8.9x2.0cm)
No. 12-02014002-20No. 12-02014001-20
Distance piece x2
10
(6.3x6.5x2.0cm)
No. 12-02000631-20
3
Components - Fittings
Please check you have all the fi ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
No. 3901-40030
A
4,0x30mm Chipboard screw x24
No. 3930-10045
D
10x45mm Dowel x12
No. 4022-012
G
Glue tube 15 gram x2
No. 3903-40035
B
4,0x35mm Chipboard screw x16
No. 3930-08050
E
8x50mm Dowel x16
No. 3909-631051
C
6,3x105mm Assembly screw x6
No. 3908-70060
F
7,0x60mm Confi rmat screw x12
Tools required
Phillips
screwdriver
(medium)
Flatblade
screwdriver
(medium)
Allen key
4mm incl.
No. 4033-004
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
4
Assembly Instructions
Step 1
Place distance pieces
10
and legs 1 and 2
so that the top holes are
facing upwards.
G
Apply glue
into the
holes of distance pieces
10
and legs 1 and 2.
DO NOT APPLY TOO
G
MUCH GLUE
Attach dowels
distance pieces
Attach dowels
1
legs
and 2.
.
E
to the
10
E
to the
.
E
D
E
G
G
10
x2
E
E E
10
G
x2
Turn the distance pieces
10
180º around, so that
E
the attached dowels
are facing downwards.
G
Apply glue
into the
holes of distance pieces
10
.
Attach dowels
distance pieces
Attach dowels
end rails
E
to the
10
.
D
to the
4
.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Step 2
4
Attach end rails
1
the legs
screws
and 2 with
C
using the allen
key.
to
1 2
x2
C
2
C
x2
D
4
x3
D
C
4
4
1
4
2
1
C
C
5
Assembly Instructions
Step 3
Place list so that holes
are facing vertical and
chamfer is positioned
downwards.
G
Apply glue
upper side of the list
Attach list
bedside
screws
to the
9
to the
7
and 8 with
B
so that the
9
.
chamfer is facing outside.
B
9
G
8
B
B
7
B
7
and
9
x2
B
8
Step 4
Attach bedsides
8
to the legs 1 and 2
with screws
allen key.
7
F
using the
and
B
9
F
2
8
7
F
1
9
Chamfer
B
Chamfer
F
F
2
F
1
7
F
1
6
Assembly Instructions
Step 5
a: Apply glue
holes of top rails
DO NOT APPLY TOO
MUCH GLUE
b: Place top rails
carefully on top of the
1
legs
dowels
holes of top rails
and 2 so that
E
G
into the
3
.
G
.
3
go into the
5
.
G
b:
a:
x2
3
2
3
b:
1
3
2
Step 6
a: Apply glue
holes of safety rails
Apply glue
holes on the top side of
bedsides
DO NOT APPLY TOO
MUCH GLUE
b: Place distance pieces
10
with dowels E into
the holes on top side of
the bedsides
Place safety rails
carefully on top of the
distance pieces
that dowels
holes of safety rails
G
into the
G
into the
7
and 8.
G
.
7
and 8.
10
E
go into the
5
so
5
.
5
.
1
G
a:
F
x2
5
F
c:
5
F
10
b:
8
G
G
10
2
b:
5
2
7
c: Attach safety rails
5
to the legs 2 with
screws
7
F
Assembly Instructions
Step 7
Place one slat 6 in the
centre of the bed. Follow
the measurement .
6
Place two slats
in the
ends of the bed. Follow
the measurement .
7
Push the bedsides
8
and
together whilst
attaching middle slat
6
to the bed with two
A
chipboard screws
.
A
13 mm
8
608 mm
A
A
Step 8
Position the remaining
6
nine slats
with a distance of 54 mm
between each.
Fasten each slat with two
screws
in the bed
A
6
7
A
54 mm
6
A
A
A
6
A
6 6 6 6 6 6 6 6 6
Assembly for this
furniture is complete.
If you need help or have damaged or missing parts,
E-mail: order@fl exa.dk
Ref.no. 44-01509-20 B Stand: 110515 Page 9 (80-12801-20)
A
call the Customer Helpline: 0045 7668 8055
8
Loading...