Chrome Double Tidy Rail HD 45KG
Assembly Instructions - Please keep for future reference
171/7639
Dimensions
Width - 80cm
Depth - 39.5cm
Height - 92/153.5cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 10/09/13
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Assemble on a soft level surface
to avoid damaging the unit or your
floor.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
• Assemble the unit as close to its
final position (in the same room)
as possible.
• From time to time check that
there are no loose screws on
this unit.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
1
Components - Parts
Please check you have all the panels listed below
Side Shelf x 2 (77.7cm)
1
Side Tube x 4 (79cm)
2
Hanger x 2 (79cm)
3
Bottom Crossbar x 2 (73cm)
4
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
A
Connector x 4
D
Bolt 32mm x 4
G
Allen key x 1
B
Lock x 4
E
Castor x 4
C
End Cap x 4
F
Spanner x 1
2
Assembly Instructions
Step 1
Note: It would be useful
to ask someone to help
you at this stage.
a: to
E
C
C
E
F
a: Insert End cap into
Side shelf . Ensure the
inner thread of End cap
correctly aligns with hole
for Castor in Side shelf
, then screw Castor
1
into position and tighten
firmly with Spanner .
Repeat Step
assemble other Side shelf
1
with Castor .
1
E
b: Insert Bottom crossbar
into the hole on
4
Side Shelf , then lock
by Bolt and tighten by
Allen key .
1
D
G
a:
1
C
C
F
E
E
b:
1
D
1
4
D
4
D
G
D
3
Assembly Instructions
Step 2
Fitting the Hanging rail
A
a: Push Connector into
both ends of Hanger .
Push Side tube into
b:
A
Connector .
Repeat Step
assemble other Hanger
with Side tube .
A
a: & b: to
A
3
2
2
a:
b:
A
3
A
2
A
A
2
c: Slightly loosen Lock ,
then put Lock onto the
top end of Side shelf .
Insert the bottom end of
Side tube into Lock
B
till the desired height,
then tighten Lock .
B
2
B
1
B
c:
2
2
B
B
B
B
1
1
4
Assembly Instructions
Step 3
Note: It would be useful
to ask someone to help
you at this stage.
Set the height of the
unit.
B
Loosen Lock , adjust
Side tube either
downward or upward till
the desired height, then
tighten Lock to fix the
height.
A
2
B
A
B
2
B
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
5
Loading...